Bensons for Beds Hip Hop STK268002 User manual

Regrettably self-assembly items cannot be returned once assembly is part or fully completed
unless the items are found to be faulty. Should you need to return the unassembled product,
please repack in its original packaging.
Important information
— We suggest you spend a short time reading through this leaflet and then follow the simple
step-by-step instructions.
— Carefully check that you have all the parts before beginning assembly.
— Keep fittings out of children's reach and keep children well away from construction area.
— We suggest you retain these instructions for future reference.
— In the unusual event of an issue with your product would you please quote the batch I.D.
number situated on the main parts of the frame (Head End- Foot End- side Rails).
Product information
— Product Painted White finish.
— Posture slats.
Care instructions
— Avoid exposing the furniture to excessive heat or direct sunlight as this can cause cracking and
deterioration of the color.
— Periodically check & re-tighten any fastener.
— Periodically dust lightly with a clean soft cloth.
— Do not use silicone based furniture polish.
— Any spills should be removed immediately with a damp cloth.
— TAKE CARE WHEN MOVING THE FURNITURE AND NEVER DRAG THE PIECES ACROSS
THE FLOOR, AS THIS WILL CAUSE DAMAGE TO THE JOINTS
Page<1/4>
Assembly instructions
Please keep these instructions for future reference.
Hip Hop Bed White / 120CM/135CM
STK268002/STK268003
Minimum Two
Persons Assembly
Approximate
Assembly Time
30 MIN

Component of Carton A Component of Carton B
(1) Head Board1
Hardware List
(A) Connector
4(B) Connecting bolt 74mm 4(C) M8 Nut
4(D) Ø8 Spring washer
4
(F) M620 Bolt
4(G) M8 35 Bolt
3(already inserted into support legs)
(M) Spanner
1
(8) Plastic end cap32
(spare 4pcs)
(9) Plastic center cap16
(spare 2pcs)
(L) 5MM Allen key
1
(K) 4MM Allen key
1
(2) Foot Board1
(3) Side Rail2
(5) Center Rail1
Step 1
● Insert Bolt (B) into
headboard & footboard
Page<2/4>
1
double: 135cm190cm
(E) Ø1040 Dowel
8
(7) Support Leg3
(H) Ø8 Washer
3
2
BB
B
B
Small double: 120cm190cm
(4) End Rail2
(6) Wooden Slats28
(I) M6 Wing Nut
4(J) M640 Bolt
4
Component of Carton A Component of Carton B
(1) Head Board1
Hardware List
(A) Connector
4(B) Connecting bolt 74mm
4(C) M8 Nut
4(D) Ø8 Spring washer
4
(F) M620 Bolt
4(G) M8 35 Bolt
3(already inserted into support legs)
(M) Spanner
1
(8) Plastic end cap34
(spare 4pcs)
(9) Plastic center cap17
(spare 2pcs)
(L) 5MM Allen key
1
(K) 4MM Allen key
1
(2) Foot Board1
(3) Side Rail2
(5) Center Rail1
Step 1
● Insert Bolt (B) into
headboard & footboard
Page<2/4>
1
King: 150cm200cm
(E) Ø1040 Dowel
8
(7) Support Leg3
(H) Ø8 Washer
3
2
BB
B
B
(4) End Rail2
(6) Wooden Slats30
(I) M6 Wing Nut
4(J) M640 Bolt
4
Component of Carton A Component of Carton B
(1) Head Board1
Hardware List
(A) Connector
4(B) Connecting bolt 74mm 4(C) M8 Nut
4(D) Ø8 Spring washer
4
(6) Plastic end cap32
(spare 4pcs)
(I) 4MM Allen key
1
(2) Foot Board1
(3) Side Rail2
Step 1
● Insert Bolt (B) into
headboard & footboard
Page<2/4>
1
Sing: 90cm190cm
(E) Ø1040 Dowel
8
2
BB
B
B
(4) End Rail2
(5) Wooden Slats14
(F) M6 Wing Nut
4(G) M640 Bolt
4(H) Spanner
1

Step 2
●Attachment of side rails to
headboard & footboard.
Step 3
●Attachment of cleat and side rail.
● Attachmentof center rail to frame.
Page<3/4>
BE
E
AD
MC
Step 2
●Attachment of side rails to
headboard & footboard.
Step 3
●Attachment of cleat and side rail.
● Attachmentof center rail to frame.
Page<3/4>
BE
E
AD
MC
4
5
4
5
I
J
FK
I
J
FK
Step 2
●Attachment of side rails to
headboard & footboard.
Step 3
●Attachment of cleat and side rail.
● Attachmentof center rail to frame.
Page<3/4>
BE
E
AD
HC
4
G
F
G
F
I
J
I
J4
4
4
K
I
K
3
3
3
3
3
3

L
7
GLOOSEN
Page<4/4>
Step 4
●Attach support legs to
the frame.
Step 5
●Slot posture slats as shown below.
L
7
GLOOSEN
Page<4/4>
Step 4
●Attach support legs to
the frame.
Step 5
●Slot posture slats as shown below.
6
777
8
9
8
6
8
9
8
7
77
H
H
G
H
G
Page<4/4>
Finished
Step 4
●Slot posture slats as shown below.
5
6
6