Bensons for Beds HIP HOP STK268006 User manual

Regrettably self-assembly items cannot be returned once assembly is part or fully completed
unless the items are found to be faulty. Should you need to return the unassembled product,
please repack in its original packaging.
Important information
— We suggest you spend a short time reading through this leaflet and then follow the simple
step-by-step instructions.
— Carefully check that you have all the parts before beginning assembly.
— Keep fittings out of children's reach and keep children well away from construction area.
— We suggest you retain these instructions for future reference.
— In the unusual event of an issue with your product would you please quote the batch I.D.
number situated on the main parts of the frame.
Product information
— Product finished Painted White finish.
— Bedside table.
Care instructions
— Avoid exposing the furniture to excessive heat or direct sunlight as this can cause cracking and
deterioration of the color.
— Periodically check & re-tighten any fastener.
— Periodically dust lightly with a clean soft cloth.
— Do not use silicone based furniture polish.
— Any spills should be removed immediately with a damp cloth.
— TAKE CARE WHEN MOVING THE FURNITURE AND NEVER DRAG THE PIECES ACROSS
THE FLOOR, AS THIS WILL CAUSE DAMAGE TO THE JOINTS
Page<1/2>
2 DRAWER HIP HOP BEDSIDE TABLE WHITE
STK268006
Assembly instructions
Please keep these instructions for future reference
Minimum Two
Persons Assembly
Approximate
Assembly Time
5 MIN

Page<2/2>
Bedside table
Component of carton
(1) Bedside
Hole in the Wall NOT
PROVIDED NOT
PROVIDED
WARNING:
To prevent your furniture from tilting forward and possibly causing property damage or personal injury it is recommended
that you Securely attach the safety strap provided to your wall using appropriate fixings
IMPORTANT:
—DO NOT place toys or other child appealing items on top of this furniture
—AVOID fully opening all drawers at the same time
—DO NOT ALLOW Small children to climb onto Drawers, shelves or to swing from open doors
CAUTION:
For your safety when attaching the anti-tilt fixings;
—Check for any electrical wires or plumbing inside the wall before drilling any holes (if you are unsure please seek
professional advice from a qualified tradesman)
— Walls are constructed from different materials eg: Masonry ( solid brick) or plaster board lined cavity walls (hollow).
It is important that you use the appropriate wall fixings for your wall type.
(Your local hardware store will have the necessary drills and fixings and can offer advice if needed)