Bentley Designs 480 83 Series User manual

Page: 1
TRIPLEWARDROBE
Stocknumber: 480X-83
Thankyou for purchasingthisproduct.Pleaseread theinstructionscarefullybeforeusetoensuresafeand
satisfactoryoperation ofthis product.
Pleasecheckthepackcontentsbeforeattemptingtoassemblethis product.A full checklist ofcomponentsis given in
this leaflet.If anycomponentsaremissing,pleasecontact theretailerfromwhomyou bought this product.
This product takesapproximately 120 MINUTES toassemblewith 2PEOPLE.
All assemblyshould beperformed on aflat,stable,clean and soft surface.
This product is HEAVY,it should beassembled asnearaspossibletothepoint ofuse. TAKECARE
WHENLIFTING toavoid personalinjuryand (or)damagetotheproduct
Thefittingpackcontains SMALL ITEMS which should be KEPTAWAYFROMYOUNGCHILDREN.
IMPORTANT: Retain theseinstructionsforfuturereference.
Pre-assemblypreparation
Pleaseensureinstructionsareread in full beforeattemptingtoassemblethis product.
NecessaryTools: PoziscrewdriverandPhillipsscrewdriver (Included)
Pz2 or Pz3 Ph 2
IW-17-480X-80-3-R16

Page:2
1
2
3
4
5
6
7
8
9
10
11
14x2
12
13
15x2
16x2 17x2
19x2
20x4
21 x3
22
23x2
24
25
26 27 x4 28
29
30
IW-17-480X-80-3-R16

Page:3
Right sidepanel
Parts checklist
Drawerfront
Verticalfront rail
Fixed shelf
Leftdoor
Right door
Centerdoor
Right drawerside
Left drawerside
Item Description Qty. Item Description Qty.
1x 1
8
2
9
3
15
4
16
5
17
6
18
7
Left side panel
x 1
x 1
x 1
x 1
x 2
x 1
x 2
x 1
x 2
Top panel x 1
Drawerback x 2
Bottompanel x 1
19Drawerbottom
20
21
22
23
Support drawer
Removableshelf
Backpanel
Backpanel
x 2
x 4
x 3
x 1
x 2
Verticalbackrail
10x 1
Top front rail
11 x 1
Top backrail
12x 1
Bottombackrail
13x 1
Centerbackrail
14x 2
24 Backpanel x 1
25 Backpanel x 1
26 Support rail x 1
27 Leg x 4
28 Hangerrail x 1
29
30
Door stopperA x 1
x 1
Door stopperB
IW-17-480X-80-3-R16

A
Dx8
Bx10
E
Cx4
x14
Fx2
Dowel
Ø8 x 30
G
Conformatscrew
Ø7 x 50
H
Hexkey
Jx12
Kx1
Metriccross head bolt
M4 x 30
Lx7
Round head screw
Ø3.5x15
M
x66
NPQx4
R
Cloth barsupport
S
Variantascrew
Ø4.2x10.5
T
x4
x12
x8
Small Flat washer
Ø5x12x1
Steeldowel
Ø7x52mm
x4
Handle
x7
x4
UV
Z
Hex headbolt
M6 x 30mm
Lock washer
Hex headbolt
M6 x 25mm
Flat washer
Ø8.4 x 17x 1.6
x4 x4
x25
x10
x14
x4
W
X
Wood shelfsupport
x12 Y
Page:4
Fittings and parts checklist
x4
Round head screw
Ø4 x 40
Round head screw
Ø4 x 25x6
dd ee ff
Camscrew
Ø7 x 44.5mm
Camlock
Ø15 x 12.5mm
Steeldowel
Ø7 x 72.5mm
Grub screw
Ø8 x 8mm
Threaded bolt
M8 x 60mm
Assynut crossdowel
M8Ø12 x 30mm
Hexagon Nut
M8 x 13mm
Dowel
Ø6 x 30
Round head screw
Ø4 x 18mm x4
gg hh
Round head screw
Ø4 x 50 Spanner
13mm
x1x1
jj
x2
x4
Small grub screw
Ø7 x 7.5mm
'O'-ring
kk x4
Camlock
Ø16 x 12.5mm
IW-17-480X-80-3-R16

Step11.1Attach 14x cam screws (A)intothepre-drilled holeson left and right sidepanels (1)&(2)
and verticalbackrail (10)asshown.Useapozi screwdrivertoturn fittings(A)clockwisetofix.
1.2Attach 2x cloth barsupports(F) using4x flat head screws (G)intosidepanels (1)&(2)as
shown.Useascrewdrivertoturn fittings(G)clockwisetofix.
1.3Insert 2x dowels (Y)toverticalfront rail (10)asshown.
Page:5
1
2
10
Y
G
F
Step 1.1
Step 1.2
Step 1.3
StepByStepAssemblyInstructions
A
IW-17-480X-80-3-R16

Page:6
Step2 2.1:Attach 4x steeldowels (C)ontotop panel(6)byscrewingfittings(C)intotheinset fittings
that arelocated insidepart (6)asshown.Useapozi screwdrivertoturn fittings(C)clockwise
tofix.
2.2 :Attach 4x steeldowels (D)ontobottompanel(7)byscrewingfittings(D)intotheinset
fittingsthat arelocated insidepart (7)asshown.Useapozi screwdrivertoturn fittings(D)
clockwisetofix.
Step 2.1
Step 2.2
C
D
6
7
StepByStepAssemblyInstructions
Inset fitting
Inset fitting
IW-17-480X-80-3-R16

Page:7
3.1:Insert 23x dowels (Y)intorails (9),(11),(12), (13),(14),door stopper(29),(30)and 4x
dowels (ee) intofixed shelf(8)asshown.
3.2:Attach door stopper(29),(30)ontofixed shelf(8)using2x round head screw(dd)as
shown.Useascrewdrivertoturn fittings(dd)clockwisetofix.
Step3
Fittings and parts checklist
Fitting
Yx 23
8
11
12
13
14x2
Step 3.1
Step 3.2
30
29
29
30
dd
9
ee x 4
ee
Y
IW-17-480X-80-3-R16

Page:8
Step4 4.1:Attach rails (11),(12),(13),(14)and fixed shelf(8)toleft sidepanel(1)asshown.Ensurecam
screws (A),dowels (ee) and dowels (Y)arealigned correctlywith theholesofmatingparts
beforeattaching.
4.2:Secureall parts(11),(12),(13)and (14)toleft side panel(1)using5x cam locks(B)as
shown.Useapozi screwdrivertoturn fittings(B)clockwisetofix.
4.3:Securepart (8)toleft sidepanel(1)using2x cam locks(kk) asshown.Useapozi screwdriver
toturn fittings(kk) clockwisetofix.
1
13
8
14
11
12
Fitting
Bx 5
StepByStepAssemblyInstructions
Step 4.3
Step 4.2
kk x 2
IW-17-480X-80-3-R16

Page:9
Step5 5.1:Attach rail (9)torail (11)and fixed shelf(8)asshown.Ensuredowels (Y)is aligned correctly
with theholeofmatingpartsbeforeattaching.
5.2:Securerail (9)toall parts(8),(11)using 1x conformat screw(H), 1x round head screw(hh)
asshown.UseAllen key(K),screwdrivertoturn fittings(H),(hh)clockwisetofix.
5.3:Attach rail (10)torails (12),(14)and fixed shelf(8)asshown.Ensurecam screws (A)and
dowels (Y)arealigned correctlywith theholesofmatingpartsbeforeattaching.
5.4:Secure rail(10)torails (14)using2x cam locks(B)and toparts(8),(12)using2x conformat
screws (H)asshown.Useascrewdrivertoturn fittings(B)and Allen key(K)toturn fittings
(H)clockwisetofix.
Fitting
Bx 2
K x 1
Hx 3
H
K
12
9
10
8
14
1
StepByStepAssemblyInstructions
Step 5.2
Step 5.4
K
H
hh 11
hh x 1
B
H
K
Step 5.2
Step 5.4
Step 5.4
IW-17-480X-80-3-R16

Page: 10
Step6 6.1: Attach right sidepanel(2) ontorails (11),(12),(13)and fixed shelf(8)asshown.Ensurecam
screws (A),dowels (Y)and dowels (ee) arealigned correctlywith theholesofmatingparts
beforeattaching.
6.2:Secureright sidepanel(2)toall parts(11),(12)and (13)using3x cam locks(B)asshown.
Useapozi screwdrivertoturn fittings(B)clockwisetofix.
6.3:Secureright sidepanel(2)toparts(8)using2x cam locks(kk) asshown.Useapozi
screwdrivertoturn fittings(kk) clockwisetofix.
Fitting
12
10
8
14
1
2
13
11
StepByStepAssemblyInstructions
Step 6.3
Step 6.2
kk
B
Bx 3
kk x 2
IW-17-480X-80-3-R16

Page: 11
StepByStepAssemblyInstructions
Step7 7.1:Attach top panel(6)ontosidepanels (1),(2),verticalrails (9),(10)&top rails (11),(12) as
shown.Ensuresteeldowels (C),dowels (Y)arealigned correctlywith theholesofmating
partsbeforeattaching.
7.2:Securetop panel(6)toall parts(1),(2),(9),(10),(11)and (12)using4x grub screws (E)
and 7x conformat screws (H)asshown.Useaallen key(K)toturn fittings(E)and allen key(K)
toturn fittings(H)clockwisetofix.
Fitting
K x 1
Hx 7
E x 4
H
K
Step 7.2
E
Step 7.2
1
2
12
11
6
9
10
K
IW-17-480X-80-3-R16

Page: 12
Step8
Fitting
8.1:Attach bottompanel(7)ontosidepanels (1)&(2)asshown.Ensuresteeldowels (D)are
aligned correctlywith theholesofmatingpartsbeforeattaching.
8.2:Securebottompanel(7)toall parts(1)&(2)using4x grub screws (E)asshown.Usea
allen key(K)toturn fittings(E)clockwisetofix.
E x 4
StepByStepAssemblyInstructions
E
E
Step 8.2
Step 8.2
72
1
K
K x 1
K
IW-17-480X-80-3-R16

StepByStepAssemblyInstructions
Page: 13
Step9 9.1: Insert cross dowel(S) intotheholeon top ofeach leg(27) asshown.Ensurethehorizontal
markingon each cross dowelis facingout asshown.
9.2:Insert threaded bolt (R)intotheholeon each leg(27).Tighten threaded bolt (R)intothe
holeofcross dowel(S) that is alreadyconcealed in each leg(27)asshown.
9.3:Attach 2x leg(27)ontobottompanel(7)byinsertingbolt (R)intothepre-drilled holesofmetal
cornerbracket asshown.Insert flat washer(V),lockwasher(U)and hex nut (T)onto
threaded bolt (R)on leg(27)and in orderasshown.
(T)followed by(U),(U)followed by(V).Tighten hexnut (T)usingspanner(jj)asshown.
9.4:Lift up thebottompanel(7)ofunit asshown.
9.5:Attach 2x leg(27)ontobottompanel(7)byinsertingbolt (R)intothepre-drilled holesofmetal
cornerbracket asshown.Insert flat washer(V),lockwasher(U)and hex nut (T)onto
threaded bolt (R)on leg(27)and in orderasshown.
(T)followed by(U),(U)followed by(V).Tighten hexnut (T)usingspanner(jj)asshown.
9.6: With help ofassistant,carefullystand theunit upright.
Fitting
Tx 4
Ux 4
Vx 4
Rx 4
Sx 4
jj x 1
S
R
27 Step 9.1
Step 9.2
27
T
U
Vjj
Step 9.5
7
27
27
27
27
T
U
V
jj
Step 9.3
Step 9.4
Step 9.6
IW-17-480X-80-3-R16

StepByStepAssemblyInstructions
Page: 14
Step1010.1Attach backpanels (22),(23),(24)and (25)alongouteredgesontobacksideoftheunit
using52x round head screws (N)asshown.Useascrewdrivertoturn fittings(N)
clockwisetofix.
10.2Securegapsusing 14x round head screws(N)with 14x small flat washers (P)asshown.
Useascrewdrivertoturn fittings(N)clockwisetofix.
Fitting
Nx 66
P x 14
Step 10.1
Step 10.2
25
23
23
22
24
IW-17-480X-80-3-R16

StepByStepAssemblyInstructions
Step 11 11.1: Insert cloth barrail (28)through thepre-drilled holeon support rail (26),then place
cloth barrail (28)ontocloth barsupports(F) on left and right sidesofunit asshown.
11.2: Securesupport rail (26)totop panel(6)using2x hex head bolts(gg)asshown.Use
Allen key(K)toturn fittings(gg)clockwisetofix.
Page: 15
Fitting
gg x 2
K x 1
gg
K
28
26
Step 11.2
gg
IW-17-480X-80-3-R16

Page: 16
StepByStepAssemblyInstructions
Step 12:Attach doors (3),(4)and (5) tosidepanels (1),(2)and verticalfront rail (9)byscrewing 12x
bolts(J)intoinset fittingsthat arelocated on parts(1),(2)and (9)asshown.Ensuretheholeson
doors (3),(4)and (5)arealigned correctlywith thematingspringpin on sidepanels (1)&(2) and
verticalfront rail (9)beforeattaching.Usingallen key(K)toturn fittings(J)clockwisetofix.
Fitting
Jx 12
K x 1
35
4
K
J
1
2
IW-17-480X-80-3-R16

Page: 17
HINGEADJUSTMENT INSTRUCTIONS
LATERALADJUSTMENT
VERTICAL ADJUSTMENT
FRONT-TO-BACK
byslackeningandretightening
thehinge-arm mountingscrew.
viaslotsonmounting
platebyslackeningand
retighteningthescrews
onmountingplate
byscrew adjustment.
IW-17-480X-80-3-R16

Page: 18
StepByStepAssemblyInstructions
Step 1313.1Attach 3x handles(L) todoor (3),(4)&(5)using3x round head bolts(M)asshown.Usea
screwdrivertoturn fittings(M)clockwisetofix.
Fitting
Step 13.1
4
5
3
M
L
IW-17-480X-80-3-R16

Step14
Fitting
:Attach 4x steeldowels (Q)byscrewingfittings(Q) intotheinset fittingsthat arelocated inside
drawerfronts(15)asshown.Ensurethedirection oftheholeson fittings(Q)arefacing
correctlyasperdiagram.
Page: 19
StepByStepAssemblyInstructions
Step15:Insert 8x dowels (ee) intothepre-drilledholeson drawersides(16),(17),asshown.
15x2
Q
Fitting 16x2
17x2
ee
Inset fitting
IW-17-480X-80-3-R16

Page:20
17.1:Slidedrawerbottoms(19)intotheslotsinsidedrawersides(16)&(17)asshown.Ensure
thedrawerbottoms(19)areplaced completelyin theslotsofdrawerfronts(15).
17.2 :Attach support drawers (20)ontodrawerfronts(15)asshown.
Step 1616.1:Attach drawersides(16)&(17)todrawerfronts(15)asshown.Ensuresteeldowels (Q)
and dowels (ee) arealigned correctlywith theholesofmatingpartsbeforeattaching.
16.2 :Secure drawersides(16)&(17)todrawerfronts(15)using4x grub screws (W)asshown.
Useapozi screwdrivertoturn fittings(W)clockwisetofix.
Fitting
Wx 4
StepByStepAssemblyInstructions
17x2
16x2
15x2
W
W
Step 17
15x2
20x2
19x2
17x2
16x2
Step 16.2
Step 16.2
IW-17-480X-80-3-R16