Bentley Designs 9129-18 User manual

Page: 1
CONSOLETABLEWITHSHELF
Stocknumber: 9129-18
Thankyou for purchasingthis product.Pleaseread theinstructionscarefullybeforeusetoensuresafeand satisfactory
operation ofthis product.
Pre-assemblypreparation
Pleaseensureinstructionsareread in full beforeattemptingtoassemblethis product.
Necessary Tools: Pozi screwdriverand Phillipsscrewdriver
Pleasecheckthepackcontentsbeforeattemptingtoassemblethis product.A full checklist ofcomponentsis
given in this leaflet.Ifanycomponentsaremissing,pleasecontact theretailerfromwhomyou bought this
product.
This product takesapproximately 30 MINUTES toassemblewith 2PEOPLE.
All assemblyshould beperformed on aflat,stable,clean and soft surface.
Thefittingpackcontains SMALL ITEMS which should be KEPTAWAYFROMYOUNGCHILDREN.
IMPORTANT: Retain theseinstructionsforfuturereference.
(Included )
IW-17-9129-06-4-0
Pz2 or Pz3 Ph 2

1x 1
Tabletop
Fittings and parts checklist
Item Description Qty. Item Description Qty.
2x 1
Fixed shelf
Cx 4
Flat washer
Ø8.4 x 17 x 1.6mm
DLock washer
Ø8.4 x 2mm x 4
Ex 4
Hex nut
Ø8 x 13mm
FSpanner x 1
4
5
Right front leg
Leftbackleg
x 1
Gx 4
Steeldowel
Ø7 x 49.5mm
B
A
x 4
Cross dowel
M8 x Ø12 x 30mm x 4
Threaded bolt
Ø8 x 60mm
3x 16
Left front leg Right backleg
x 1
x 1
x 4
H
Page :2
IW-17-9129-06-4-0

Page :3
Step1
StepByStepAssemblyInstructions
1.1:Lay all partson aflat,clean and soft surface.
1.2 : Insert4x cross dowels (A)intolegs(3),(4),(5)&(6)byplacingeach fitting(A) intotheholes
on top ofeach leg.Ensurethehorizontalmarkingon each fittingis facingasshown.
1.3 : Screw4x threadedbolts(B) intofittings(A)that arealreadyconcealed in legs(3),(4),(5)&
(6) asshown.Continuetore-tighten until theyaresecurelyfastened.
Continuedon next page
Fitting
A x 4
Bx 4
IW-17-9129-06-4-0

Page :4
Step1
StepByStepAssemblyInstructions
Continued:
1.4 : Attach 4x steeldowels (G)intotheinset fittingthat arealreadyconcealed in the
pre-drilled legs(3),(4),(5)&(6)asshown.Useapozi screwdrivertoturn fittings(G)
clockwisetofix.Ensurethedirection oftheholeson fittings(G)arefacingcorrectlyas
perdiagram.
Fitting
Gx 4
'O'ring
Step2
Fitting
Cx 1
Dx 1
E x 1
Fx 1
IW-17-9129-06-4-0

Page :5
Step3
StepByStepAssemblyInstructions
3.1:With help ofassistant,slideshelf(2)intotheslot and ontosteeldowelon leg(5)as
shown.Ensurefixed shelf(2)is placed completelyin theslot ofleg.
3.2 : Securepart (2)topart (5)using 1x grub screw(H)asshown.Useapozi screwdriverto
turn fitting(H)clockwisetofix.
Fitting
Hx 1
IW-17-9129-06-4-0

Step 4.4
Step 4.2&4.3
Step4
StepByStepAssemblyInstructions
Page :6
5
2
H
4
IW-17-9129-06-4-0

Step 5.4
Page :7
Step5
StepByStepAssemblyInstructions
Fitting
Hx 2
Cx 2
Dx 2
E x 2
Fx 1
5.1:Attach legs(3)&(6)intoplacebyinsertingthreaded bolts(B)through thepre-drilled
holesofmetalcornerbracketsasshown.Ensuretheslotsand dowels on legs(3)&(6)are
aligned correctlywith fixed shelf(2)beforeattaching.
5.2 : Insert flat washers (C),lockwashers (D)and hex nuts(E)ontoall threaded bolts(B)
asshownand in orderasshown -(C)followedby(D)followed by(E).
5.3 : Tightenhex nuts(E) usingspanner(F) asshown.Continuetore-tighten hex nuts(E)until
theyaresecurelyfastened.
5.4 : Secureparts(3)&(6)topart (2)using2x grub screws (H)asshown.Useapozi screwdriver
toturn fittings(H)clockwisetofix.
5.5 :Stand theunit upright.
IW-17-9129-06-4-0

Howtocareforyourwoodfurniture
Dustwith a clean,damp,lintfree cloth.Frequentdusting will remove abrasive buildup,which can damage the
finish overtime.
Do notuse a verywetcloth orallowanyliquid to contactwith the veneersfora long period oftime as this can
permanentlydamage the surface.Wipe up spillsimmediately.
Do notuse anyabrasive cleanerorharsh detergentasthiscan damage the surface ofthe furniture.
Spraypolishesare bestavoided astheycontain siliconeswhich mayspoil the furniture's surface when building up
overtime.
Make sure all surfacesare protected fromheatand liquids by mats and coasters.
Ensure thata matorpad isplacedunderpaperwhen you are writing on the furniture surface.
Do notplace rubber,cork,vinylorplasticmaterialson the wood finish as chemicals within may reactwith the
finish if leftin contactforan extended period oftime.
Ourfurniture will endure mosttemperaturesin the home butitisbest toavoidplacing furniture nexttoheat
sourcessuch asradiators orfires.Be particularlycarefulwith solid wood asthe lackofhumidity causedby home
heating can cause damage such aswarping,cracking orsplitting.
Excessive exposure to sunlightcan cause fading ofyourfurniture.
Avoid exposing yourfurniture to anyliquids.All liquidsshould be wiped up immediately with a soft,slightly
damp cloth in the direction ofthe wood grain.If stickyliquid residuesdo occur,they may be removedwith a
dilute solution ofwarmsoapywaterfollowed bya clean,damp sponge.The area shouldthen be wiped
immediatelyin the direction ofthe wood grain with a clean,softwhite cloth until completely dry.
Nail polish remover,hairspray,perfume,potpourri&anyotherproducts thatcontains solvents can damage
wood upholsteryfinishes.
SafetyInstructions:
Neverdrag furniturewhen moving it.Always liftit.
Periodicallycheckall fixings toensurenone have comeloose.Re-tighten when necessary.
Please take carewhen handlingormovingthe furnitureas careless handling may causedamage orinjury.
Furniturecanbe dangerousif incorrectlyassembled. Assemblyshould be carried outby a competentperson.
Noliabilitywill be accepted fordamage orinjurycaused byincorrectly installed orassembled furniture.
Heavyitemwarning:
Itisrecommended toseek assistancewhen movingaheavy object.Take carewhen liftingtoavoid personal
injuryand (or)damage tothe product.
Itisrecommended thatbeforemovingaheavy objecttoa newlocation itis completelydis-assembled to
avoid personalinjuryordamage tothe furniture.Please be careful toretain all fittings when doing this.
PLEASE KEEPTHESE INSTRUCTIONS FOR FUTURE REFERENCE
Care and Maintenance
WoodFurniture
Wood displays differentgrain patternsdependingon whichway they are cut-forexample, the 'medullary ray'
whichcanappearon oak furnitureisamarkof good qualitytimber-thesearejustcharacteristics of the natural
beautyof thewood.
Somefurnitureisalsodeliberately aged and rustic.
Wood veneersalsoallowdistinctivepatterns tobe created onsome surfaces,suchas table tops and drawer
frontsbytheway sliversarearranged.
Alltimberand veneersurfaceswill change colourand mellowovertime.Newfurniturewill initially vary in shade
fromitemsthathave been previously purchased.
Page :8
IW-17-9129-06-4-0