Bentley Designs ATLANTA 4007-43 User manual

135CM-150CMUPHBEDSTEAD
Stocknumber: 4007-43/44
Thankyou for purchasingthis product.Pleaseread theinstructionscarefullybeforeusetoensuresafeand
satisfactoryoperation ofthis product.
Page: 1
Pre-assemblypreparation
Pleaseensureinstructionsareread in full beforeattemptingtoassemblethis product.
Necessary Tools: Pozi screwdriverand Phillipsscrewdriver
Pleasecheckthepackcontentsbeforeattemptingtoassemblethis product.A full checklist ofcomponentsis
given in this leaflet.Ifanycomponentsaremissing,pleasecontact theretailerfromwhomyou bought this
product.
This product takesapproximately 60 MINUTES toassemblewith 2PEOPLE.
All assemblyshould beperformed on aflat,stable,clean and soft surface.
This product is HEAVY,it should beassembled asnearaspossibletothepoint ofuse. TAKECARE
WHENLIFTING toavoid personalinjuryand (or)damagetotheproduct
Thefittingpackcontains SMALL ITEMS which should be KEPTAWAYFROMYOUNGCHILDREN.
IMPORTANT: Retain theseinstructionsforfuturereference.
(Included)
Pz2 or Pz3 Ph 2
IW-17-4007-554/555-R1

Page:2
2
3
4x2
5x28
6
7x2
8
9
13x2
12x2
14x28
10
11
15x14
1
IW-17-4007-554/555-R1

Page:3
Fittings and parts checklist
Item Description Qty. Item Description Qty.
1Head end rail x 1
9
2Foot end rail x 1
10
3Metalcenterrail x 1
4Siderail x 2
5SprungSlat x 28
6Adjustablemetalcenterleg x 1
7Legrail x 2
8Head verticalleft x 1
ABracket x 2
BFlat head screw
Ø4 x 17mm x 8 G
C H
Steeldowel
Ø7 x 49.5mm x 18
DGrub screw x 26
11
12
13
Head verticalright
Horizontalrail
Head board
Support legleft
Support legright
x 1
x 1
x 1
x 2
x 2
Wooden dowel
Ø8 x 30mm
Ex 8
Hex headbolt
M6 x 40mm x 20
KSteeldowel
Ø7 x 70mm x 8
"O"ring
"O"ring
FAllen key
M4 x 30 x 107mm x 1
x 8
Hex headbolt
M6 x 30mm
14
15 Centerplasticsleeve
End plasticsleeve x 28
x 14
IW-17-4007-554/555-R1

StepByStepAssemblyInstructions
Step11.1:Lay all partson aflat,stable,clean and soft surface.
1.2 :Attach brackets(A)ontothepre-drilled holeson head end rail (1)and foot end rail(2)using
8x flat head screws (B)asshown.Useascrewdrivertoturn fittings(B)clockwisetofix.
1.3 :Insert 6x wooden dowels (E)intothepre-drilled holeson head end rail (1)and foot end rail
(2)asshown.
Page:4
:Insert 2x wooden dowels (E)intothepre-drilled holeson end rails (10)asshown.
Step2
Fitting
E x 2
Fitting
A x 2
Bx 81
E
10
2
A
B
E
E x 6
E
E
IW-17-4007-554/555-R1

StepByStepAssemblyInstructions
Page:5
:Attach 8x steeldowels (K)and 18x steeldowels (C)ontohead end rail (1),foot end rail(2),side
rail (4),head verticalleft (8)and head verticalright (9)byscrewingfittings(K)&(C)intothe
inset fittingsthat arelocated on parts(1),(2),(4),(8)&(9)asshown.Ensurethedirection ofthe
holeson fittings(K)&(C)arefacingcorrectlyasperdiagram.Useapozi screwdriverto turn
fittings(K)&(C)clockwise to fix.
Step3
Fitting
Cx18
Kx8
2
4x2
9
8
C
K
K
C
Inset fitting
Inset fitting
Inset fitting
Inset fitting
1
IW-17-4007-554/555-R1

StepByStepAssemblyInstructions
Step4
Page:6
Step5
4.1: Attach head verticalleft (8)and head verticalright (9)tohorizontalrail (10)asshown.
Ensuresteeldowels (C)and wooden dowels (E)arealigned correctlywith theholesof
matingpartsbeforeattaching.
4.2 :Secureparts(8),(9)topart (10)using2x grub screws (D)asshown.Useapozi screwdriver
toturn fittings(D)clockwisetofix.
Fitting
Dx 2
8
9
:Attach thestructureassembled in Step4 toheadboard (11)using8x hex head bolts(G)as
shown.Useallen key(F) toturn fittings(G)clockwisetofix.
8
9
F
G
Fitting
Gx 8
D
Fx 110
11
10
IW-17-4007-554/555-R1

StepByStepAssemblyInstructions
Step6
Page:7
6.1: Attach support legleft (12)and support legright (13)ontosiderail (4)asshown.Ensure
steeldowels (C)arealigned correctlywith theholesofmatingpartsbeforeattaching.
6.2 :Secureparts(12)&(13)toparts(4)using8x grub screws (D)asshown.Useapozi
screwdrivertoturn fittings(D)clockwisetofix.
Fitting
Dx 8
4x2
13x2
Step6.1 12x2
D
IW-17-4007-554/555-R1

StepByStepAssemblyInstructions
Page:8
Step77.1:With help ofassistant,stand head end rail (1)and foot end rail (2)upright.Carefullyattach
head end rail (1)and foot end rail (2)ontoboth endsofsiderails (4)asshown.Ensuresteel
dowels (C)&steeldowels (K)arealigned correctlywith theholesofmatingpartsbefore
attaching.
7.2 :Securehead end rail (1)and foot end rail (2)toboth side rails (4)using 16x grub screws (D)
asshown.Useapozi screwdrivertoturn fittings(D)clockwisetofix.
7.3 :Turn upsidedown.
Fitting
Dx 16
D
4
4
2
1D
13
12
12
13
IW-17-4007-554/555-R1

StepByStepAssemblyInstructions
Page:9
Step88.1:Attach thelegrails (7)tostructureassembled in Step 7 asshown.Ensurewooden dowels (E)
arealigned correctlywith theholesofmatingpartsbeforeattaching.
8.2:Secureparts(7)tostructureassembled in Step 7 using 12x hex head bolts(H)asshown.
Useallen key(F) toturn fittings(H)clockwisetofix.
8.3 :Stand theunit upright. F
H
4
4
7
7
1
2
Fitting
Hx 12
Fx 1
Step8.1
Step8.1
IW-17-4007-554/555-R1

StepByStepAssemblyInstructions
Step99.1:Removethebracket fromadjustablemetalcenterleg(6) byusingallen key(F)toturn 2x hex
head boltscounterclockwiseasshown.
9.2:Placeadjustablemetalcenterleg(6)ontometalcenterrail (3)then securethebracket back
ontometalcenterleg(6)usingthepreviouslyremoved 2x hex head boltsasshown.Useallen
key(F) toturn boltsclockwisetofix.
9.3:Placetheassembled metalcenterrail (3)with metalcenterleg(6)ontothebrackets(A)that
arealreadyaffixed onhead end rail (1)and foot end rail (2)asshown.Adjust theadjustable
centerlegtofit with thefloorlevelasshown.
Page: 10
Fitting
Fx 1
x 1
x 1
x 2
6
F
F
3
6
2
3
1
IW-17-4007-554/555-R1

StepByStepAssemblyInstructions
Step10 10.1:Insert 28x end plasticsleeves(14)ontooneend of28x sprungslats(5)and thereafterinsert
theotherendsofall parts(5)intoboth sidesof 14x centerplasticsleeves(15)asshown.
10.2:Securethepreviouslyassembled 14x sprungslat setsintothepre-drilled holeson wood
supportsofsiderails (4)and pre-drilled holeson metalcenterrail (3)asshown.
Page: 11
Fitting
5x28
5
x 14
5
x 14
IW-17-4007-554/555-R1

StepByStepAssemblyInstructions
Step11 11.1:With help ofassistant.Carefullyattach thestructureassembled in Step5 tothestructure
assembled in Step 10 using 8x hex head bolts(H)asshown.Useallen key(F)toturn fittings
(H)clockwisetofix.
Page: 12
H
F
2
1
4
4
Fitting
Hx 8
IW-17-4007-554/555-R1

Page: 13
CAUTION:ToRelocateBed
CAUTION: DO NOTPULL ONSIDE RAIL CAUTION: LIFT TO RELOCATE BED
IW-17-4007-554/555-R1

PLEASE KEEP THESE INSTRUCTIONSFORFUTUREREFERENCE
Page: 14
CareandMaintenance
WoodFurniture
Wood displaysdifferent grain patternsdependingon which way theyarecut -for example,the'medullaryray' which
can appearon oakfurnitureis amarkofgood qualitytimber-thesearejust characteristicsofthenaturalbeautyof
thewood.
Somefurnitureis also deliberatelyaged and rustic.
Wood veneers also allow distinctivepatternstobecreated on somesurfaces, such astabletopsand drawer
frontsbytheway slivers arearranged.
All timberand veneersurfaceswill changecolourand mellow overtime.Newfurniturewill initiallyvaryin shade
fromitemsthat havebeen previouslypurchased.
How tocarefor yourwoodfurniture
Dust with aclean,damp,lint free cloth.Frequent dustingwill removeabrasivebuild up,which can damagethe
finish overtime.
Donot useaverywet cloth or allow anyliquid tocontact with theveneers for alongperiod oftimeasthis can
permanentlydamagethesurface.Wipeup spills immediately.
Donot useanyabrasivecleaneror harsh detergent asthis can damagethesurfaceofthefurniture.
Spray polishesarebest avoided astheycontain siliconeswhich may spoil thefurniture'ssurfacewhen buildingup
overtime.
Make sureall surfacesareprotected fromheat and liquidsbymatsand coasters.
Ensurethat amat or pad is placed underpaperwhenyou arewritingon thefurnituresurface.
Donot placerubber, cork,vinylor plasticmaterials on thewood finish aschemicals within may react with thefinish
ifleft in contact for an extended period oftime.
Ourfurniturewill enduremost temperaturesin thehomebut it is best toavoid placingfurniturenext toheat
sourcessuch asradiators or fires. Beparticularlycarefulwith solid wood asthelackofhumiditycaused byhome
heatingcan causedamagesuch aswarping,crackingor splitting.
Excessiveexposuretosunlight can causefadingofyourfurniture.
Avoid exposingyourfurnituretoanyliquids. All liquidsshould bewiped up immediatelywith asoft,slightlydamp
cloth in thedirection ofthewood grain.If stickyliquid residuesdooccur, theymay beremoved with adilutesolution
ofwarmsoapywaterfollowed byaclean,damp sponge.Theareashouldthen bewiped immediatelyin thedirection
ofthewood grain with aclean,soft whitecloth until completelydry.
Nail polish remover, hairspray,perfume,potpourri &anyotherproductsthat containssolventscan damagewood
upholsteryfinishes.
Upholsteredfurniture
Theupholsteryshould not beexposed for longperiodstodirect sunlight asthis may causefadingand
deterioration ofcovermaterial. Protect fromexposuretosourcesofheat such asradiators or open flames.
It is recommended togivetheupholsteryafrequent vacuumingor light brushing.
It is veryimportant torub verygentlytoavoid colourchange.This propercleaningwill prevent buildup ofdust,
soil and oils which can bedamagingtocovermaterial. In theevent ofspillageit is imperativetoact quickly.
Carefullysoakup anyexcess liquid,ideallyusingtheedgeofawhitepapertowel, then dab gentlywith afresh
toweltakingcaretoavoid soakingin or spreadingoftheremainingliquid.
SafetyInstructions:
Neverdrag furniturewhen movingit.Alwayslift it.
Periodicallycheckall fixingstoensurenonehavecomeloose.Re-tighten when necessary.
Pleasetake carewhen handlingor movingthefurnitureascareless handlingmay causedamageor injury.
Furniturecan bedangerousifincorrectlyassembled.Assemblyshould becarried out byacompetent person.
Noliabilitywill beaccepted for damageor injurycaused byincorrectlyinstalled or assembled furniture.
Heavy itemwarning:
It is recommended toseek assistancewhen movingaheavy object.Take carewhen liftingtoavoid personal
injuryand (or)damagetotheproduct.
It is recommended that beforemovingaheavy object toanewlocation it is completelydis-assembled to
avoid personalinjuryor damagetothefurniture.Pleasebecarefultoretain all fittingswhen doingthis.
IW-17-4007-554/555-R1