Bentley Designs 6-8 DINING EXTENSION TABLE 300X-3 User manual

Pre-assemblypreparation
Pleaseensureinstructionsareread in full beforeattemptingtoassemblethis product.
Stocknumber:300X-3
Thankyou for purchasingthis product.Pleasereadtheinstructionscarefullybeforeusetoensuresafeand
satisfactoryoperation ofthis product.
6-8 DINING EXTENSION TABLE
Page: 1
Pleasecheckthepackcontentsbeforeattemptingtoassemblethis product.A full checklist ofcomponentsis
given in this leaflet.Ifanycomponentsaremissing,pleasecontact theretailerfromwhomyou bought this
product.
This product takesapproximately 45MINUTES toassemblewith 2PEOPLE.
All assemblyshould beperformed on aflat,stable,clean and soft surface.
This product is HEAVY,it should beassembled asnearaspossibletothepoint ofuse. TAKECARE
WHENLIFTING toavoid personalinjuryand (or)damagetotheproduct
Thefittingpackcontains SMALL ITEMS which should be KEPTAWAYFROMYOUNGCHILDREN.
IMPORTANT: Retain theseinstructionsforfuturereference.
Necessary Tools: (Included )
IW-17-300X-01-2-R4

Page :2
Fittings and parts checklist
Item Description Qty. Item Description Qty.
1Table frame x 1
ASteeldowel x 8
4
Bx 8
Grub screw
Centerrail 5
E
2
3
x 1
x 1
Smallallen key
"O"ring
Leafframe
x2
x 1
Corovin storagebag
2
3x2 4
5
Legframe
Lockwasher
x 2
F
Cx2
Hex headbolt
x 1
DLargeallen key x 1
Flatwasher
x 2
G
IW-17-300X-01-2-R4

Page :3
Stepbystepassemblyinstructions
Step1
Step 1.1
Step 1.2
Step 1.2
Step 1.3
1.1: Stand thetableupright asshown.
1.2:Extend thetablebyslidethetop all theway out asshown.
1.3:Removeleafasshown.
IW-17-300X-01-2-R4

Page:4
Stepbystepassemblyinstructions
Step2
A
A
A
2.1: Lay all partson aflat,stable,clean and soft surface.
2.2 : Insert 8x steeldowels (A)intolegframe(3)byscrewingfittings(A)intotheinset fittings
that arelocated on legframe(3)asshown.Ensuretheholeson fittings(A)arefacingthe
correct direction asperdiagram.
Step 2.2
Step 2.2
3x2
3x2
Fitting
A x 8
Insetfitting
IW-17-300X-01-2-R4

Page:5
StepByStepAssemblyInstructions
Attach legframe(3)tocenterrail (2)asshown.Ensuresteeldowel(A)arealigned
correctlywith theholesofmatingpartsbeforeattachinh.
Step3
3
3
2
IW-17-300X-01-2-R4

StepByStepAssemblyInstructions
4.1:Attach thestructureassembled in step3 ontotableframe(1)asshown.Ensuresteeldowels
(A)arealigned correctlywith theholesofmatingpartsbeforeattaching.
4.2 :Secure legframe (3)totableframe(1)using4x grub screws (B)asshown.Use largeallen key
(D)toturn fittings(B) clockwisetofix.
4.3 :Secure legframe(3)totableframe(1) using2x hex head bolts(C),2x flat washers (F)and 2x
lock washers(G)asshown.Use small allen key(E)toturn fittings(C) clockwisetofix.
4.4 :Securelegframe(3)tocenterrail (2)using4x grub screws (B)asshown.Use allenkey(D)
toturn fittings(B)clockwisetofix.
4.5 :Locktheslides.
Step4
Fitting
B x 8
Dx 1
Cx2
Ex1
Fx2
G x2
Page :6
B
3
Step 4.1
Step 4.2 Step 4.3
Step 4.5
C
G
F
D
Step 4.4
B
IW-17-300X-01-2-R4

Page :7
StepByStepAssemblyInstructions
Step5 Important :Ensureyou havealreadylocked theslidesin Step4 beforerightingthetable.
Note :When movingthetable,removeleaf,closetabletop and locktheslides, then move
bygrippingor liftingthelegsor underframe.
Caution :This product is heavy,with help ofassistant stand thetableupright.
6.1: Placestoragebag (5)and leaf frame(4)ontoaflat,stable,clean and soft surface.
6.2 : Removeleaf frame(4)fromstoragebag (5)asshown .
Step 6
4
5
4
Step 6.2
IW-17-300X-01-2-R4

Page :8
Step7 7.1: Unlocktheslidesthat werelocked in Step4.
7.2 :Extend thetablebyslidethetop all theway out asshown.
7.3 :Placeleaf frame(4)overthesideapronsasshown.Slideleaf frame(4)tomain tabletop
until nogap is visible.
7.4 :Push tabletop inwardsuntil nogap is visible.
7.5 :Locktheslides.
Note: Ensurethemetalpinsarealigned totheholeson themaintabletopsand theleaf before
closingthetable.
StepByStepAssemblyInstructions
Step 7.1
Step 7.2
Step 7.2
Step 7.4
Step 7.5
4
Step 7.3
IW-17-300X-01-2-R4

Page :9
Stepbystepassemblyinstructions
Step8 Removetheleaf
8.1:Unlocktheslidesthat werelocked in Step7.
8.2 :Extend thetablebyslidethetop all the way out asshown.
8.3 :Removeleaf (4).
Step 8.1
4
5
4
Step9 9.1: Placeleaf frame(4)and corovin storagebag (5)ontoaflat,stable,clean and soft surface.
9.2 : Placetheleaf frame(4)intocorovinstoragebag (5)asshown.
5
Step 9.2
4
Step 8.3
Step 8.2
Step 8.2
IW-17-300X-01-2-R4

Page: 10
Step10
StepByStepAssemblyInstructions
10.1:Carefullyplacecorovin storagebag (5)with leaf frame(4)ontowood support storage
undertabletop asshown.
10.2 :Closethetablebyslidethetop all theway in asshown.Ensurethemetalpinson both table
frame(1)arealigned correctlywith thematingholesbeforeclosing.
10.3 :Ensurethat you havelocked theslidesafterclosingthetable.
Step 10.3
5
Step 10.2
Step 10.2
Step 10.1
5
IW-17-300X-01-2-R4

PLEASE KEEP THESE INSTRUCTIONSFORFUTUREREFERENCE Page: 11
CareandMaintenance
WoodFurniture
Wood displaysdifferent grain patternsdependingon which way theyarecut -for example,the'medullaryray' which
can appearon oakfurnitureis amarkofgood qualitytimber-thesearejust characteristicsofthenaturalbeautyof
thewood.
Somefurnitureis also deliberatelyaged and rustic.
Wood veneers also allow distinctivepatternstobecreated on somesurfaces, such astabletopsand drawer
frontsbytheway slivers arearranged.
All timberand veneersurfaceswill changecolourand mellow overtime.Newfurniturewill initiallyvaryin shade
fromitemsthat havebeen previouslypurchased.
Howtocareforyourwoodfurniture
Dust with aclean,damp,lint free cloth.Frequent dustingwill removeabrasivebuild up,which can damagethe
finish overtime.
Donot useaverywet cloth or allow anyliquid tocontact with theveneers for alongperiod oftimeasthis can
permanentlydamagethesurface.Wipeup spills immediately.
Donot useanyabrasivecleaneror harsh detergent asthis can damagethesurfaceofthe furniture.
Spray polishesarebest avoided astheycontain siliconeswhich may spoil thefurniture'ssurfacewhen buildingup
overtime.
Make sureall surfacesareprotected fromheat and liquidsbymatsand coasters.
Ensurethat amat or pad is placed underpaperwhenyou arewritingon thefurnituresurface.
Donot placerubber, cork,vinylor plasticmaterials on thewood finish aschemicals within may react with thefinish
ifleft in contact for an extended period oftime.
Ourfurniturewill enduremost temperaturesin thehomebut it is best toavoid placingfurniturenext toheat
sourcessuch asradiators or fires.Beparticularlycarefulwith solid wood asthelackofhumiditycaused byhome
heatingcan causedamagesuch aswarping,crackingor splitting.
Excessiveexposuretosunlight can causefadingofyourfurniture.
Avoid exposingyourfurnituretoanyliquids. All liquidsshould bewiped up immediatelywith asoft,slightlydamp
cloth in thedirection ofthewood grain.If stickyliquid residuesdooccur, theymay beremoved with adilute
solution ofwarmsoapywaterfollowed byaclean,damp sponge.Theareashould then bewiped immediatelyin the
direction ofthewood grain with aclean,soft whitecloth until completelydry.
Nail polish remover, hairspray,perfume,potpourri &anyotherproductsthat containssolventscan damagewood
upholsteryfinishes.
SafetyInstructions:
Neverdrag furniturewhen movingit.Alwayslift it.
Periodicallycheckall fixingstoensurenonehavecomeloose.Re-tighten when necessary.
Pleasetake carewhen handlingor movingthefurnitureascareless handlingmay causedamageor injury.
Furniturecan bedangerousifincorrectlyassembled.Assemblyshould becarried out byacompetent person.
Noliabilitywill beaccepted for damageor injurycaused byincorrectlyinstalled or assembled furniture.
Heavy itemwarning:
It is recommended toseek assistancewhen movingaheavy object.Take carewhen liftingtoavoid personal
injuryand (or)damagetotheproduct.
It is recommended that beforemovingaheavy object toanewlocation it is completelydis-assembled to
avoid personalinjuryor damagetothefurniture.Pleasebecarefultoretain all fittingswhen doingthis.
Extendabletablewarning:
Extendablediningtablesshould beleft extended for thefirst fewmonthstoavoid an uneven appearance.
Likewise,lampsand ornamentsshouldalso bemoved regularly.
IW-17-300X-01-2-R4