Hillsdale Furniture 4232-822 User manual

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all components are
in proper posion, ght and free from damage. Keep this assembly instrucon for future reference. Adult assembly is required. The product of Hillsdale Furniture,
LLC is designed for residenal use only. Customer Service Phone Number: 502-562-0000
Date: 11-29-2016
Page 1 of 2
Arbor Hill Mission Stool
Model #4232-822 (486891320) Non-Swivel Counter Stool
QTYCODE HARDWARE
13
4
11
11
4
6
1
1
1
2
3
4
5
6
7
8
1/4” x 1-1/2” Allen Bolts
1/4” 1/4” x 3-3/8” Allen Bolts
5/16” Spring Washers
5/16” Flat Washers
5/16” Hex Nuts
Wood Screws
Allen Wrench
Hex Wrench
CARE & MAINTENANCE : The touch ofa so cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely ghtened.
HDFBP
QTYCODE COMPONENTSCOMPONENTS
1A
CODE
B Seat BaseStool Back
QTY
1
2C D Front SupportFront Legs 1
ESide Supports2
• Do not let any sharp objects touch or rub
the surface of the product.
• When assembling, do not let children play
around the working area.
• Please confirm all parts are correct before
starng the assembly process.
• Do not ghten all bolts and screws
completely unl the enre unit has been
assembled and set up.
• Be careful if using power tools as they can
over ghten screws and strip threads.
WARNING
E
A
B
C
D

2
2
6
66
6
6
6
5
5
4
4
4
4
4
4
4
3
3
3
3
3
3
3
1
1
1
Date: 11-29-2016
Page 2 of 2
Arbor Hill Mission Stool
Model #4232-822 (486891320) Non-Swivel Counter Stool
CARE & MAINTENANCE : The touch ofa so cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely ghtened.
E
E
A
B
C
C
D
STEP 1
Begin assembly by aaching the Seat Base (B) to the Stool Back (A) by aligning the 3 center holes and securing with 3 Allen
Bolts (1), 3 Spring Washers (3) & 3 Flat Washers (4) to secure in place. Do not fully ghten bolts for this step.
STEP 2
Finish securing the Seat Base (B) to the Stool Back (A) by aligning the holes on
the legs and securing with 2 Allen Bolts (2), 2 Spring Washers (3) & 2 Flat
Washers (4) to secure in place. Tighten all bolts from Steps 1 and 2 using Allen
Wrench (7) provided.
STEP 3
Aach each Front Leg (C) to the front of the Seat Base (B) by inserng the
threads into the open holes and securing with 2 Flat Washers (4), 2 Spring
Washers (3) & 2 Hex Nuts (5) per leg. Do not fully ghten nuts for this step.
STEP 4
Aach the Front Support (D) to the inside of each Front
Leg (C) by fing each end in place. Also aach each Side
Support (E) to the inside of each rear leg on the Stool Back
(A) and backside of each Front Leg (C) by fing each end
in place. Secure in place using 1 Wood Screw (6) per end.
Tighten all screws. Also ghten all nuts from Step 3 using
Hex Wrench (8) provided. The assembly is now complete.