Furniture of America St. Nicholas CM3224RT User manual

MODEL #
Questions?
GIVE US A CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PT)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
2 - People
(Included)
Allen Wrench
Recommended
CM3224RT
1 / 9
VERSION # 21-07-08
(Included)
Wrench

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific Time and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PT)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed are all acccounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2 / 9

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent to prevent
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
scratches and damages.
3 / 9

4 / 9

ROUND TABLE
#1 1pc #2 1pc #4 4pcs
#A 8pcs
Bolt Ø5/16" x 1-3/8"
#B 8pcs #C 16pcs #D 16pcs
Table Top
#3 1pc
#E 1pc #F 1pc
Plate Post Leg
Nut Ø5/16" x 1/2" Lock Washer
Ø5/16"
Flat Washer
Ø5/16"
Allen Wrench Wrench
CM3224RT
5 / 9

#4
#3
#1
#2
Exploded View
6 / 9

CM3224RT-T is packed in 2 cases
Carton Disignation Part Hardware
CM3324RT-T-1
#1
#2
#3
#4
7 / 9
CM3324RT-T-2
Table Top
Plate
Post
Leg
#A x8pcs
#B x8pcs
#C x16pcs
#D x16pcs
#E x1pc
#F x1pc

ASSEMBLY INSTRUCTIONS
#A
#E
#C
#D
#2
#3
#4
1
Part #3 x1pc
Part #4 x4pcs
Hardware #B x8pcs
Hardware #C x8pcs
Hardware #D x8pcs
2
Part #2 x1pc
Hardware #A x4pcs
Hardware #C x4pcs
Hardware #D x4pcs
#B
#C
#D
#F
8 / 9
I. Insert the threaded ends of the legs (#4) into
the pre-drilled holes along the sides of the
post (#3).
II. From within the post (#3), insert a flat washer
(#D) then lock washer (#C) and a nut (#B),
in that order onto the threaded ends. Secure
using the wrench (#F).
I. Flip the post so that it stands
on the legs and align the plate
(#2) to the Pre-drilled holes on
top of the post.
II. Prepare 4 bolt assemblies by
FIRST inserting a lock washer
(#C) onto the bolt (#A) then a
flat washer (#D) onto that SAME
bolt (#A), in that order. Insert into
the 4 center holes and secure
using the the Allen wrench (#E).

ASSEMBLY INSTRUCTIONS
#A
#C
#D
#E
#1
Adjusting table leg
3
Part #1 x1pc
Hardware #A x4pcs
Hardware #C x4pcs
Hardware #D x4pcs
4
9 / 9
I. Carefully place the table top (#1) onto a protected surface.
II. Prepare 4 bolt assemblies by FIRST inserting a lock washer
(#C) onto the bolt (#A) then a flat washer (#D) onto that SAME
bolt (#A), in that order. Insert into the 4 corner holes and secure
using the the Allen wrench(#E)
Carefully turn the completed table upright. Make sure the table is rested on a flat surface and does
not feel loose or wobbly. If it does, double check that the bolts are secured and properly tightened.