Berkley Jensen 251137 User manual

Pistol Drill Tape Measure Hammer Screwdriver Ladder 5 people
Note: The pavilion needs to be installed in cooperation with five
people. The following tools are not included and needed for assembly:
10' x 12'WOOD PAVILION
ARTICLE# 251137
If you have comments or questions, please contact BJ’s Wholesale Club at 1-800-934-1204.
If you have any issues with the product, do not return the product back to the store.
For any questions, replacement parts or issues about our product, call Sunjoy Customer
Service 1(866) 578 6569. For further assistance, please email us at [e-mail].
ASSEMBLY INSTRUCTIONS

2/ 31
Warning! To reduce the risk ofserious injury,read the following safety instructions before
assembling and using the pavilion.
Caution! Always keep children under close supervision while they are using or around this product.
Never leave children unattended.
This product isintended for outdoor use only.
The product should be assembled on a flat stable surface.
Do not assemble the pavilion on unstable surfaces.
Ensure the location and clearance of your pavilion is acceptable.
The pavilion must be anchored with stakes into the ground for added safety.Itisrecommended that
it should not be permanently attached to a concrete floor or platform.
Arrange the necessary manpower when assembling or moving the product.
Some parts may contain sharp edges. Wear protective gloves and glasses ifnecessary.
Keep children and pets away while setting up the pavilion.
Check all nutsand bolts periodically for tightness. When required, tighten them again.
Repairing and replacing parts should be done by a qualified technician.
The pavilion is intended for decorative and shade purposes only,and is not designed to
withstand harsh weather, including high winds, rain and snow.
If the product isnot being used for long periods oftime (e.g. winter), itshould be stored in a clean,
dry environment.
Do not put a Liquid Propane or Wood Burning fire pit or fireplace inside the product.
Do not climb or place heavy objects onto the pavilion roof.
Retain the original packaging to store and protect the pavilion during the winter months.
Do not use or enter the pavilion if the following conditions exists：
1. Visible movement of supports, roofing panels or a sagging roof.
2. Unusual noise fromthe pavilion.
3. Deformed roof panels.
4. Damaged or missing bolts/fasteners.
Please check your HOA, Local, and State Governments prior to purchasing and assembling
pavilions. These local organizations may require permits and specific requirements forinstallation.
Maintain your instruction manual for future reference
Warranty: Please retain you receipt for proof of purchase.
I
mportant Safety Instructions

3/ 31
Description Label Part Number Qty Part Image
Outer Long Right
Beam（Long）02 P000400507 2
Outer Long Left
Beam（Long）01 P000400506 2
Outer Long Left
Beam（Short）03 P000400508 2
Outer Long Right
Beam（Short）04 P000400509 2
Inner Middle Beam 05 P000400510 4
Inner Short Beam
（Long）07 P000400511 4
Inner Short Beam
（Short）06 P000400512 4
Post 08 P000200227 4
Arc Support 1 10 P005000200 4
Arc Support 2 11 P005000201 4
Triangular
Support Beam 13 P000601456 4
Triangular Middle
Support Beam 14 P005000437 2
Triangular Frame
Slanting Beam 15 P005000436 4
Base Cover B P006100177 4
Base C P000100338 4
Triangular
Connector 1 C1 P000501250 2
Part List

4/ 31
Triangular
Connector 2 C2 P000501251 2
Triangular
Connector 3C3 P000501252 4
Beam Upper
Connector D P000501253 2
Triangular Upper
Press C4 P002200226 2
Big Roof Beam 1 F1 P000601447 1
Big Roof Beam 2 F2 P000601448 1
Roof Beam
Connector 1 G4P000501090 1
Roof Beam
Connector 2 G5P000501091 1
Roof Beam
Connector 3 G6P000501107 1
Big Roof Middle
Beam H P000600712 6
Middle Beam
Lower Connector
I
P00050161901 6
Support Tube 1 J1 P005000434 3
Support Tube 2 J2 P005000435 2
Hook P P005800001 1
Big Roof Lower
Tube 1 L1 P000600090 2
Big Roof Lower
Tube 2 L2 P000600091 2
Big Roof Lower
Tube 3 L3 P000600092 2
Big Roof Lower
Tube 4 L4 P000600093 2
Big Roof Side
Tube 1 M1 P000600745 2

5/ 31
Big Roof Side
Tube 2 M2 P000600377 2
Big Roof Small
Beam N P000601453 16
Small Beam
Presser O P002200224 8
Roof Cover P1 P000700926 12
Big Roof Cover 1 R1 P000800255 2
Big Roof Cover 2 R2 P000800256 1
Steel Pin S P005100267 12
Catch T P005600322 2

6/ 31
AA Bolt M10*205 H010010276 8+1
BB Flat Washer M6 H050030001 150+8
CC Screw M5*40 H030050057 64+4
DD Nut M6 H040010004 4+1
EE Screw M5*30 H030050058 116+6
FF Bolt M6*15 H010020011 138+7
GG Bolt M6* 75 H010020024 4+1
HH Bolt M8*35 H010030083 16+1
II Bolt M8*35 H030030010 18+1
KK Bolt M8*25 H010030084 24+2
LL Non-slip Nuts
M10 H040050020 8+1
MM Flat Washer M8 H050030002 78+4
NN Flat Washer
M10 H050030003 24+2
Hardware Pack

7/ 31
OO Screw M10*80 H030010031 8+1
PP Stake Φ8*180 H070010003 8
QQ Bolt M6*35 H010020013 4+1
RR M3 Drill H090990002 2
SS T-Nut
M8*20 H040090005 16+1
UU Non-slip nuts
M8 H040050021 10+1
VV T-Nut
M8*8 H040090004 24+2
WW Bolt M8*50 H010010363 10+1
Z1 Wrench M6 H090010017 2
Z2 Allen Key M8 H090030005 1
Z3 Wrench M8 H090010012 2
Z4 Wrench M10 H090010015 2

8/ 31
1
4X
16X
4X
4X

9/ 31
2
4X
4X
16X
16X
16X
4X
16X
4X

10 / 31
3
4X
4X
4X
2X
2X
2X
1X

11 / 31
4
4X
4X
2X
2X
4X
1X

12 / 31
5
64X

13 / 31
6
4X
12X
4X
4X

14 / 31
7
4X
4X
4X
12X

15 / 31
8
d1=d2
16X
16X
32X
4X
4X
Rt
∠
90
Assembly Tip on Step 8:
Please measure to make sure the length of d1 is equal to d2
before moving to next step to ensure a square frame and best
results. Keep the beam at right angles to the post, the post
at right angles to the ground, and keep the beam horizontal.

16 / 31
9
190 190
1590.51590.5
2X
2X
36X
2X

17 / 31
10
8X
2X
4X
4X
2X
12X

18 / 31
11
10X
20X
10X

19 / 31
12
4X
1X
1X 1X 1X
1X
4X 8X

20 / 31
13
1X
4X