Bernina Presser Feet User manual

At-A-Glance Reference Guide
to BERNINA®Presser Feet, Attachments, and Accessories
Page 1 of 8 ©2009 BERNINA of America, Inc.
Presser Feet:
• are precision engineered for specific functions
• are Swiss-made for the highest quality
• are one-piece metal feet, making them strong and durable
• are easy to change with one hand, requiring no special tools
• have a white shank, making it easier to see the eye of the needle, resulting in easier threading
• are, in some cases, modeled after commercial feet used in factories to increase speed and
production with professional looking results
• do the job intended in relation to all types of sewing (garment making, quilting, crafting, etc.)
• are supported by the best and most complete educational materials in the industry such as
Feet-ures, Volumes 1, 2, and 3 and the BERNINA USA website (www.berninausa.com)
Understanding the Numbers/Letters
BERNINA presser feet are numbered and may have one or two additional versions with a letter that follows
the number, such as Edgestitch Foot #10C or Jeans Foot #8D.
No Letter—The number without a letter refers to a foot engineered to be used with BERNINA
models that have a CB Hook and a maximum stitch width of 5.5mm. These feet may also be
compatible with models that have a 9mm width when a 9mm width is not applicable, such
as when making pintucks with feet #30, 31, 32, or 33.
The Letter “C”—When a foot number is followed by a C, it indicates a version of the foot
made for models that have rotary hook systems and a maximum stitch width of 9mm. The
“C” stands for coded and refers to the sensor on the foot that works with the electronics of
the machine to engage the wider stitch width (see page 8 for more information on sensors).
The sole of the “C” foot is usually larger to fit the wider feed dogs of the rotary hook machines.
Exceptions: Overlock Foot #2/2A: 2A is larger to fit the wider feed dog but does not have a sensor
for a wider stitch because the overlock stitches are not used at wide widths. Extra Wide Gathering
Foot #16C: 16C is larger to fit the wider feed dog but does not have a sensor for a wider stitch width.
The Letter “D”—The feet that have a number followed by a D are designed
to work with the 8-Series (models 830 and 820) Dual Feed feature. After
attaching the foot, the dual feed mechanism is positioned in the cutout on the
back of the foot, engaging the BERNINA Dual Feed system. It is recommended
that the D-Feet are used only when engaging the BERNINA Dual Feed feature.
Assembling the Walking Foot • Hand-polishing Presser Feet Soles • Assembling the Blind Hem Foot
PRESSER FEET PRODUCTION

At-A-Glance Reference Guide
to BERNINA®Presser Feet, Attachments, and Accessories
Page 2 of 8 ©2009 BERNINA of America, Inc.
ZIGZAG FOOT #0
All-purpose foot for straight
stitch, zigzag, and other
forward-feed stitches.
REVERSE PATTERN
FOOT #1/1C/D
All-purpose foot that works
well for forward-feed and
multi-motion decorative
stitches.
OVERLOCK FOOT #2/2A
For use with overlock
stitches to overcast fabric
edges, attach ribbing, and
sew overlock seams.
STANDARD
BUTTONHOLE FOOT #3
For manual buttonholes,
the sole has two grooves
for the beads of the but-
tonhole to move freely.
AUTOMATIC
BUTTONHOLE FOOT #3A
Works with computerized
models to make measured,
repeatable buttonholes
automatically. Also has slide
for manual measuring.
BUTTONHOLE FOOT
with SLIDE #3B
Alignment guides make
it easier to make manual
buttonholes of the same
length.
BUTTONHOLE FOOT #3C
Essentially the same
as Foot #3, this foot is
designed to work with
models that have a maxi-
mum stitch width of 9mm.
ZIPPER FOOT #4/4D
Designed to stitch next
to zipper coils, this foot
requires the use of a far
right or far left needle
position.
BLIND HEM FOOT #5
Works with the Blindstitch
for sewing “blind” hems.
The foot design helps
to create a smooth,
un-puckered hem.
EMBROIDERY FOOT #6
Designed for heavy satin
stitching and appliqué, this
foot also has a hole for
sewing over narrow cord
and elastic thread.
TAILOR TACK FOOT #7
Designed to make tailor
tacks to transfer pattern
markings, it also does
decorative work such as
fagoting and fringing.
JEANS FOOT #8/8D
This hinged, straight stitch
foot concentrates needle
power for better penetration
when sewing through thick,
heavy, dense layers.

At-A-Glance Reference Guide
to BERNINA®Presser Feet, Attachments, and Accessories
Page 3 of 8 ©2009 BERNINA of America, Inc.
DARNING FOOT #9
Free-motion foot for
darning and other free-
motion work such as
thread painting, bobbin
play, and quilting.
EDGESTITCH FOOT
#10/10C/10D
Has a guide to help stitch
perfectly straight along a
seam or edge; great for
in-the-ditch stitching.
CORDONNET FOOT #11
Use heavy decorative
thread in the needle
(topstitching needle) and
sew beautiful straight
stitches.
BULKY OVERLOCK
FOOT #12
Designed to sew heavy
knits, also great for
rounded piping, couching
cord, & attaching beads.
STRAIGHT STITCH
FOOT #13
For all straight stitch
work such as seaming,
topstitching, and quilt
piecing.
ZIPPER FOOT WITH
GUIDE #14/14D
Similar to Foot #4 but has
an adjustable guide for
sewing even laps when
inserting zippers.
EMBROIDERY FOOT #15
Used with the artista
embroidery module for
machine embroidery.
BUTTON SEW-ON
FOOT #18
Quickly and easily sew
flat buttons with or
without thread shanks.
OPEN EMBROIDERY
FOOT #20/20C/20D
Similar to Foot #6 but
has the front bar cut away
for better visibility of the
stitching area.
GATHERING FOOT
#16/16C
Easily gather fabrics. Wide
“C” version fits 9mm feed
dog but does not accommo-
date 9mm stitch width.
BRAIDING FOOT #21
Has a beveled hole to hold
thick yarns, decorative
threads, and narrow
braids for couching.
BULKY OVERLOCK
FOOT #12C
Functions same as Foot
#12 with a larger “tunnel.”
Also has a hole on top for
couching (see Foot #21).

At-A-Glance Reference Guide
to BERNINA®Presser Feet, Attachments, and Accessories
Page 4 of 8 ©2009 BERNINA of America, Inc.
TEARDROP EMBROI-
DERY FOOT #26
The teardrop-shaped
cutout provides improved
thread control for machine
embroidery.
FREEHAND QUILTING
FOOT #29/29C
Designed for free-motion
quilting, the clear sole
offers great visibility.
3-GROOVE PINTUCK
FOOT #30
Sew double needle tucks
in heavier fabrics such
as denim and wool.
5-GROOVE PINTUCK
FOOT #31
Sew double needle
tucks in medium weight
fabrics such as linen
and chambray.
7-GROOVE PINTUCK
FOOT #32
Sew double needle tucks in
lightweight fabrics such as
shirting and silk.
FREEHAND EMBROI-
DERY FOOT #24
The cut-away portion
of this free-motion foot
offers better visibility
than Foot #9.
CORDING FOOT#25
Uniquely designed with
five grooves to hold and
control narrow cords side-
by-side for couching.
CLEAR EMBROIDERY
FOOT #23
For satin stitching and
appliqué, the clear sole
offers great visibility of
the stitching area.
CORDING FOOT #22
Uniquely designed with
three grooves to hold and
control narrow cords side-
by-side for couching.
9-GROOVE PINTUCK
FOOT #33
Sew double needle tucks
in fine fabrics such as
batiste.
CLEAR FOOT
#34/34C/34D
Similar to Reverse Pattern
Foot #1/1C/1D, this foot has
a clear sole for increased
stitch visibility.
INVISIBLE ZIPPER
FOOT #35
Specially designed to insert
in-seam “invisible” zippers;
eliminates the need to
press zippers open!

At-A-Glance Reference Guide
to BERNINA®Presser Feet, Attachments, and Accessories
Page 5 of 8 ©2009 BERNINA of America, Inc.
PATCHWORK FOOT
#37/37D
Designed to make sewing
¼” and ⅛” seams easy and
precise.
PIPING FOOT #38
Use to make flat, couture
piping and for uneven sew-
ing surfaces such as when
sewing on heavy trims
and webbing.
ROTARY FOOT #41
(1630)
For use with the
directional sewing
feature of model 1630.
BERNINA STITCH
REGULATOR #42 (BSR)
Patented foot that gives
even, consistent free-
motion stitches without
hours of practice.
FREE-MOTION
COUCHING FOOT #43
Holds narrow cords in place
for free-motion couching;
straight stitch only.
WALKING FOOT #50
Works with feed dog to keep
layers of fabric from shifting
while being stitched. Espe-
cially good for quilting and
matching plaids.
ROLLER FOOT #51
Rollers on the sole help
fabric feeding when
sewing leather, plastic,
velvet, etc.
SIDEWAYS MOTION
FOOT #40C
For sewing large directional
sewing motifs on certain
models.
CLEAR EMBROIDERY
FOOT 39/39C
Similar to Embroidery Foot
#6 but with a clear sole for
better visibility; has a hole
for sewing over elastic cord.
NON-STICK STRAIGHT
STITCH FOOT #53
Similar to Foot #13 but
has a special coating on
the sole to slide over
plastic, leather, etc.
NON-STICK ZIPPER
FOOT #54
Similar to Foot #4 but
has a special coating
on the sole to slide over
plastic, leather, etc.
NON-STICK ZIGZAG
FOOT #52/52C/52D
Special coating on the
sole lets foot slide over
plastic, leather, and other
“sticky” fabrics.

At-A-Glance Reference Guide
to BERNINA®Presser Feet, Attachments, and Accessories
Page 6 of 8 ©2009 BERNINA of America, Inc.
3mm ZIGZAG HEMMER
FOOT #63
Double-turned hem rolled
and stitched in one opera-
tion; use stitches up to 3mm
wide; good for curves.
4mm STRAIGHT STITCH
HEMMER FOOT #64
Double-turned hem rolled
and stitched in one opera-
tion; use straight stitch only.
LEATHER ROLLER
FOOT #55
Gives maximum maneuver-
ability enabling you to
follow any contour and
sew over uneven layers.
NON-STICK OPEN
EMBROIDERY FOOT #56
Similar to Foot #20 but has
a special coating on the
sole to slide over plastic,
leather, etc.
PATCHWORK FOOT WITH
GUIDE #57
Essentially the same as
Foot #37 with an added
guide for extra insurance
for precision stitching.
2mm STRAIGHT STITCH
HEMMER FOOT #62
Double-turned hem rolled
and stitched in one opera-
tion; use straight stitch only.
DOUBLE CORD FOOT
#59C
Couch double or single
rows of 4mm-6mm cord.
Also good for single and
double piping.
DOUBLE CORD
FOOT #60C
Couch double or single
rows of 7mm-8mm cord.
Also good for single and
double piping.
2mm ZIGZAG HEMMER
FOOT #61
Double-turned hem rolled
and stitched in one opera-
tion; use stitches up to 2mm
wide.
6mm ZIGZAG HEMMER
FOOT #66
Double-turned hem rolled
and stitched in one opera-
tion; use stitches up to 6mm
wide.
4mm ROLL AND SHELL
HEMMER FOOT #69
Double-turned soft hem
rolled and stitched in one
operation; use stitches up
to 4mm wide.
2mm ROLL AND SHELL
HEMMER FOOT #68
Double-turned soft hem
rolled and stitched in one
operation; use stitches
up to 2mm wide.

At-A-Glance Reference Guide
to BERNINA®Presser Feet, Attachments, and Accessories
Page 7 of 8 ©2009 BERNINA of America, Inc.
BINDER
ATTACHMENT #84
Feeds a flat strip of fabric
around fabric edge & holds
it in place for stitching.
Requires Foot #94
SIMPLE BINDER #85
Feeds pre-folded or
unfolded binding for
stitching.
RUFFLER
ATTACHMENT #86
Gather or pleat fabrics;
also gathers/pleats and
attaches to a flat layer in
one operation.
4mm LAP SEAM
FOOT #70
Makes easy 4mm flat
felled seams by folding
and holding the fabric for
stitching.
8mm LAP SEAM
FOOT #71
Makes easy 8mm flat
felled seams by folding
and holding the fabric
for stitching.
FOOT ADAPTER
#75 & #77
Low shank adapter for
generic feet and the
BERNINA Ruffler
Attachment #86.
CUT ‘n’ SEW
ATTACHMENT #80
Trims fabric and sews
in one pass—machine
doubles as a serger;
requires Foot #90.
EYELET EMBROIDERY
SET #82
Makes a variety of sizes
of embroidered eyelets.
Requires Foot #82
(included).
CIRCULAR EMBROI-
DERY ATTACHMENT
#83
Works with most presser
feet and stitches to sew
perfect circles.
EYELET EMBROIDERY
FOOT #92
Presser foot required
for using the Eyelet
Embroidery Set.
CUT ‘n’ SEW FOOT #90
Presser foot required for
using Cut ‘n’ Sew Attach-
ment #80.
BINDER FOOT #94
Presser foot required
for using Binder
Attachment #84

At-A-Glance Reference Guide
to BERNINA®Presser Feet, Attachments, and Accessories
Page 8 of 8 ©2009 BERNINA of America, Inc.
NEEDLE PUNCH ACCESSORY SET
Duplicates the look of hand needle felting but is
much faster. Works only with BERNINA models
that have CB Hook systems. Has five barbed
needles and comes with a special stitch plate
to accommodate them.
Video clips showing basic uses of each BERNINA
presser foot and accessory are available at:
www.berninausa.com
Go to: products > accessories > presser feet
For complete information on using all of the
BERNINA®presser feet and accessories, see
Feet-ures, a 3-volume set of spiral-bound
books. This comprehensive guide includes
technique and setting specifics plus a useful
cross-check feature referencing all BERNINA®
presser feet that can be used for particular
techniques.
“old” sensor “new” sensor
Coded Feet
The current sensor of the coded feet enables the foot to
sense the stitch width—5mm or 9mm. Coded feet will be
manufactured with a new sensor that detects the stitch
width and is also part of the new presser foot recognition
System of the 8-Series machines.
Other points to know:
• All existing classic feet, the C-feet and all feet without sensor, can be used with the BERNINA 820 & 830.
• The 9mm detection is the same with "old" C-feet and with new C-feet.
• A foot without a sensor will be detected as a 5.5mm foot. This means straight stitch feet will not be
detected automatically but each mounted foot can be selected from the list of the touch screen.