Berry Plaswood Hero A Frame Table - Adult User manual

FIX A-FRAMES TO TABLE TOP USING 70mm SCREWS
THROUGH PRE-DRILLED HOLES IN FIXING BARS
BEFORE FULLY TIGHTENING ALL SCREWS CHECK THAT
THE PICNIC TABLE IS SQUARE BY MEASURING ACROSS
THE DIAGONALS
F
4 no
E
4 no
E
4 no
E
4 no
E
4 no
F
4 no
E
14 no
F
4 no
IMPORTANT! - ONLY SCREW
HALFWAY IN AT THIS STAGE
& FULLY TIGHTEN WHEN
SEATS ARE TO BE FIXED
B
C
B
E
14 no
E
14 no
ENSURE END A-FRAMES HAVE
THE SEAT FIXING BLOCKS
FACING INWARDS AS SHOWN
BEGIN ASSEMBLY WITH TABLE TOP
TURNED UPSIDE DOWN
A
PARTS LIST - 2 PERSON ASSEMBLY:-
A PRE-ASSEMBLED TABLE TOP 1 no.
B END A-FRAME 2 no.
C MIDDLE A-FRAME 1 no.
D PRE-ASSEMBLED SEAT 2 no.
E 70mm BRASS SCREWS 58 no.
F 70mm S/STEEL SCREWS 28 no.
TOOLS:-
POWER DRILL WITH PHILIPS-HEAD BIT
MEASURING TAPE & STRAIGHT EDGE
C
ADULT PICNIC TABLE:
Assembly Guide - 1 of 2.
PW-HERO-APT-A4-S1
IMPORTANT:-
Ensure that you are familiar with these assembly
instructions prior to commencing assembly.
We will not accept any claims resulting from
products that have been wrongly assembled.
Employ safe lifting procedures when handling
components.
06/08/2019
Help and support:-
Please contact us using the telephone number
or email address as stated on your shipping documents.

BEFORE FULLY TIGHTENING ALL SCREWS
CHECK THAT THE SEATS ARE SQUARE
IMPORTANT - ENSURE THAT THE 16 no BRASS SEAT
FIXING SCREWS ARE NOW FULLY TIGHTENED - THESE
ARE SHOWN ON PAGE 1 OF 2
ENSURE CHAMFERED ENDS OF
THE SEAT FIXING BLOCKS ARE
FACING OUTWARDS AS SHOWN
F
2 no
F
4 no
F
2 no
TURN PICNIC TABLE OVER ONTO FEET
& FIX PRE-ASSEMBLED SEATS USING 70mm
SCREWS THROUGH PRE-DRILLED HOES
IN SEAT FIXING BLOCKS
F
2 no
F
4 no
F
2 no
D
D
TOOLS:-
POWER DRILL WITH PHILIPS-HEAD BIT
MEASURING TAPE & STRAIGHT EDGE
C
ADULT PICNIC TABLE:
Assembly Guide - 2 of 2.
PW-HERO-APT-A4-S2
IMPORTANT:-
Ensure that you are familiar with these assembly
instructions prior to commencing assembly.
We will not accept any claims resulting from
products that have been wrongly assembled.
Employ safe lifting procedures when handling
components.
06/08/2019
Help and support:-
Please contact us using the telephone number
or email address as stated on your shipping documents.