Betafence CREAZEN User manual

CREAZEN -How to replace a
damaged panel or post?
INSTRUCTIONS

A. How to replace a damaged panel ?
2
1. Cut the post next to the damaged panel: use a grinder and cut the post just
above the ground.
DAMAGED PANEL

A. How to replace a damaged panel ?
3
2. Remove the post by pulling/pushing the cut post and both panels
simultaneously in one direction.
DAMAGED PANEL

A. How to replace a damaged panel ?
4
3. Remove the damaged panel. Then remove the remaining of the post &
concrete out of the ground, and enlarge the hole.

A. How to replace a damaged panel ?
5
4. Take a new panel and a new post. Put fixators at both sides of the post and
put the post in the hole.

A. How to replace a damaged panel ?
6
5. Now, simultaneously push the post and both panels back in place. Make
sure the panels are taken by the fixators.

A. How to replace a damaged panel ?
7
6. Fil the hole with concrete. The damaged panel is now replaced.

B. How to replace a damaged post?
8
Same way of working !