Betafence Publifor 3D Pro XL User manual

Publifor®Installation Manual
Security Barrier System
Sales Release Version Apr 16

1. Components
2. Steps to assembly the Standard Module Publifor
2

Main components of standard Publifor module :
N°1 Metal basement
L 2530 x W 700 x H 805 mm
N°2 Vertical posts
80 x 60 x 3 H 2547 mm
N°2 Horizontal posts
80 x 60 x 2 W 2405 mm
3
80 x 60 x 2 W 2405 mm
N°4 Connection plates
140 x 80 x 75 mm - thickness 5 mm
N°2 Panels
H 1630 x L 2500 mm
N°32 polyamide clamps + N°32 M6L40
screws
N°8 M8L80 (bolts with washers and self-
breaking nuts)
N°6 M 30

A. A. Step 1 :
Position the basement on a plane support. Install the vertical posts to the basement, using
the screws M6L30. N°3 screws are necessary for each post.
4

B. B. Step 2
Install the horizontal post on the top and the T-plates, using the screws M8 L 80 and
washer and self breaking nut. N°2 T plates and N°4 screws are necessary for each
horizontal post.
5

C. C. Step 3
Fill the basement with concrete and shake it .
6

D. D. Step 4
Install the horizontal post on the bottom and the T-plates, using the screws M8 L 80
and washer and self breaking nut. N°2 T plates and N°4 screws are necessary
for each horizontal post.
7

E. E. Step 5
Install the Nylofor 2DS panels on the frame, using polyamide clamps and M6L40 screws.
N°2 panels, N°32 polyamide clamps + N°32 M6L40 screws are necessary.
8

F.F. Step 6
After the positioning of mobile fence , connect the modules together using M10L30
screws and self-locking nuts. N°2 bolts set to connect N°2 modules.
9