Betafence Nylofor-Twilfix User manual

Nylofor / Twilfix
Square & rectangular
posts
Installation manual EN
18/05/2020 – Nylofor / Twilfix® - Installation manual

Square &
rectangular
posts
Nylofor /Twilfix®
post systems
2 18/05/2020 – Nylofor / Twilfix® - Installation manual

Content
1. Components
1. The posts
2. Fixators and tools
3. The Nylofor panels
4. Rolltop and Paladin panels
5. Nylofor City system
2. Installation
1. Foundations
2. Installation of posts & panels
3. Installation of Nylofor City system
3 18/05/2020 – Nylofor / Twilfix® - Installation manual

1. The posts
1. Components
-Posts with 60x60x1.5mm sections are available for panels from 0.6
to 2.4 m
-For installations higher than 2.4m, rectangular posts with profile
80x60x2,5mm or 120x60x3mm are used
-The posts are galvanised inside and outside and polyester coated
-This type of post can be installed with all Nylofor panels
-Rolltop and Palladin panel also can be installed
-The posts are equipped with M8 inserts to attach the panels with
clamps and security bolts
-Additionally inserts for panel stepping are available
-Each post is fitted with a PP post cap with Betafence logo
-Posts with inserts in 2 adjacent sides are available to make
corners
60
60
1.5
corner post
M8 insert
418/05/2020 – Nylofor / Twilfix® - Installation manual

–PA fixators with caps, to be attached with M8x40
security bolts (ISO 7380)
–Different fittings are available, depending on the
type of panel being installed
–2D
–3D INT*
–3D Pro INT*
–2D Super
–3D Super
–3D Pro XL
–F–2D
–3D
–3D Pro
–3D Pro XL
*INT = intermediate = clamps that are not positioned in a nose
–A bracket (in stainless steel) is used to attach one
panel on top of another or for two panels in a sharp
angle (only Nylofor 3D and Nylofor Medium).
2. Fixators and tools
1. Components
5 18/05/2020 – Nylofor / Twilfix® - Installation manual

–Metal fixators for panel Rolltop are to be attached with
M8x40 security bolts Tri-Lobe Bolt (Countersunk Head)
–Metal cover for Paladin panel
2. Fixators and tools
1. Components
618/05/2020 – Nylofor / Twilfix® - Installation manual

1. Components
3. The Nylofor panels
–Range:
Type 3DPro3D2D3D
Super
F2D
Super
Height 1,03 –
2,43 m
1,03 –
2,43 m
1,03 –
2,03 m
1,63 –
2,43 m
0,63 –
2,03 m
1,03 –
2,43 m
Width 2,5 m 2,5 m 2,5 m 2,5 m 2,5 m 2,5 m
Wire dia H: 5mm
V: 5mm
H: 5mm
V: 5mm
H: 2x6mm
V: 5mm
H: 8mm
V: 5mm
H: 15x6mm
V: 5mm
H: 2x8mm
V: 6mm
Mesh size 200 x 50
mm
200 x 50
mm
200 x 50
mm
200 x 50
mm
200 x 50
mm
200 x 50
mm
Nose type 1wire 1 wire none 1 wire none none
Coating GALV+PVC GALV+PES GALV+PES GALV+PES GALV+PES GALV+PES
718/05/2020 – Nylofor / Twilfix® - Installation manual

1. Components
4. The Rolltop & Paladin panels
–Range:
Type Roll top Paladin
Height 900; 1200; 1500; 1800; 2400 mm 1240; 1850; 2038; 2445 mm
Width 3m 3m
Wire dia H: 5mm V: 5mm H: 4mm V: 3mm
Mesh size 150 x 50mm 50,8x50,8 ; 50,8x25,4 ; 50,8x12,7 ; 25,4x12,7mm
Nose type 4wire 5wire
Coating GALV+PES GALV+PES
818/05/2020 – Nylofor / Twilfix® - Installation manual

1. Components
5. Nylofor City system
9
-The dimensions of the post are always 60x60x1,5mm (Nylofor/Twilfix
post)
-Post types: intermediate posts (same as end posts) and corner posts
-The system can be installed to concrete, or on a baseplate post
-The posts are pre-fitted with the appropriate holes and inserts for the
fixation of the panels
-Posts are covered with plastic post cap with Betafence logo
-Nylofor City is always installed with Nylofor F panels. The panels are
mounted with the pins on the bottom
-A top rail is mounted on top of the panel to have additional rigidity,
standard length 2505mm
-Neoprene strips are glued in between the top rail and the Nylofor F
panel to avoid vibrations that can cause noise (3 pieces/panel)
32,5
31,5
1,5
20x5x100mm
TOP RAIL
NEOPRENE
STRIPS
18/05/2020 – Nylofor / Twilfix® - Installation manual

1. Components
5. Nylofor City system
10
Nylofor City is installed with one metal clamp on top to hold the rail, the other clamps are standard
Nylofor F clamps (PA)
—There are 3 types of metal clamps: an intermediate clamp, a left corner clamp and a right
corner clamp. Corner clamps are also used for end posts. They are fixed with Hexagon Socket
Button Head screws (ISO 7380) M8x60 in stainless steel.
—Nylofor clamps for Nylofor F. The plastic clamps are fixed with Hexagon Socket Button Head
screws (ISO 7380) M8x40.
INTERMEDIATE LEFT CORNER
RIGHT CORNER
One set = 10IM +1L+1R
(no bolts!)
18/05/2020 – Nylofor / Twilfix® - Installation manual