Better Bathrooms ARIMB018 User manual

Product
ARIMB018 - Matt Black Slotted Sprung Basin Waste
ARIBB020 - Brushed Brass Slotted Basin Waste
CHSBW001 - Chro e Slotted Basin Waste
ARIMW005 - Matt White Slotted Basin Waste
ARIVRG005 - Vapour Rose Gold Slotted Basin Waste
ARIMB019 - Matt Black Unslotted Sprung Basin Waste
ARIBB021 - Brushed Brass Unslotted Basin Waste
CHUBW001 - Chro e Unslotted Basin Waste
ARIMW006 - Matt White Unslotted Basin Waste
ARIVRG006 - Vapour Rose Gold Unslotted Basin Waste
Single-person assembly
We always recommend using professional
tradespeople to install your product
V2_3/9/2022

ongratulations on your purchase
And welcome to our growing gang of savvy shoppers
We're on a ission to bring you extraordinary bathroo products, for less. Fro odern
to traditional style cera ics, plus the gorgeous fixtures, fittings and furniture to atch. So,
you can fall in love with your space every single day.
As one of the UK's largest independent bathroo stores, we've received countless
awards; including the National Business Awards UK, the Digital Entrepreneur Awards and
being placed on The Sunday Ti es Fast Track 100.
We hope your new product goes above and beyond your expectations. However, should
any proble s occur, please:
log in to your account and contact our custo er services tea via your self-serve
portal – betterbathroo s.co /Custo erAccount/Login
contact us via betterbathroo s.co /content/contact-us
Important information
Please read these instructions thoroughly and retain for future reference
Installation ust be carried out in co pliance with The Water Fittings Regulations
and Scottish Water Byelaws.
The syste ust be flushed prior to installation, else it ight clog the filter and the
following pheno enon occurs: discharged water volu e is s all, or te perture
cannot be controlled well.
Pressures ust be equal for opti u perfor ance
Please do not connect hot and cold water supply lines in reverse. This could result
in hot water flowing fro cold line and cause scalding.
The feed-water te perature of water shall not exceed 85°C.
Exceeding 85° ay cause scalding, the service life of faucets ight be shortened,
or the faucet ight be da aged.
After installation, please ake sure the faucet is securely ounted and checked for
leaks.


Parts / Diagrams
No Part Description
1 Clicker do e
2 O-ring
3 Piston kit
4 Drain body
5 Rubber Washer
6 Rubber Washer
7 Plastic gasket
8 Locknut
Dimensions
Tools required
Seal tape
Spanner

Installation
Slotted/Unslotted Basin Waste
Note: Silicone sealant can be used.
Unscrew the locknut(4) , and re ove the plastic
gasketr(3) and rubber washer(2).
Insert the drain body(1) fro above the basin.
For the slotted basin waste, ake sure the slot
lines up with the overlfow on the basin.
Install the rubber washer(2), plastic gasket(3)
and tighten with locknut(4)).
To fill the basin, the Clicker echanisa
requires pressing down the clicker do e, and
pressing it again to release the water.
Check all the joints for leaks.
Troubleshooting
Issues heck
Loose of drain body Is locknut(8) fully tighten
Is the clicker do e(1) fully tighten
Water leak Is there da age or dirt with the o-ring(2)
Is there da age or dirt with the rubber
washers(5 or 6)
Maintenance and leaning
To aintain the surface of your product, wipe with a clean da p cloth and wipe dry, do
not use any abrasive cleaning agents or aterials.
If any harsh che icals co e into contact with the surface of the product, rinse and wipe
clean i ediately.