Better Bathrooms ARIMB021 User manual

Product
ARIMB021 - Matt Black Bath Waste and Overflow
ARIBB022 - Brushed Brass Bath Waste and Overflow
CHBAW001 - Chrome Bath Waste and Overflow
ARIMW00 - Matt White Bath Waste and Overflow
ARIVRG00 - Vapour Rose Gold Bath Waste and Overflow
Single-person assembly
We always recommend using professional
tradespeople to install your product
V2_7/9/2022

ongratulations on your purchase
And welcome to our growing gang of savvy shoppers
We're on a mission to bring you extraordinary bathroom products, for less. From modern
to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So,
you can fall in love with your space every single day.
As one of the UK's largest independent bathroom stores, we've received countless
awards; including the National Business Awards UK, the Digital Entrepreneur Awards and
being placed on The Sunday Times Fast Track 100.
We hope your new product goes above and beyond your expectations. However, should
any problems occur, please:
log in to your account and contact our customer services team via your self-serve
portal – betterbathrooms.com/CustomerAccount/Login
contact us via betterbathrooms.com/content/contact-us
Important information
Please read these instructions thoroughly and retain for future reference


Parts / Diagrams
No Part Description
1 Waste housing
2 Rubber washer
3 Flat rubber washer
4 Waste base
5 Spring core
6 Sealing ring
Drain cover
8 Decorative cover
9 Thread bolt
10 Fixing seat
11 Rubber seal
12 Overflow housing
13 Retaining nut
14 Hose
15 Rubber washer
16 Retaining nut
Dimensions

Tools required
Screwdriver
Installation
Fit the rubber seal(11) on the overflow
housing(12), hold the unit in position from the
backside of bath.
Screw in the thread bolt(9) through the fixing
seat(10) and fasten with the overflow
housing(12). Please ensure it is fully screwed at
the body.
Install the decorative cover(8) by inserting the
plastic cores into the 2 holes on fixing seat(10).
Put the waste base assembled(4&5& ) and flat
rubber washer(3) into the bottom waste hole of
bath. Place the rubber washer(2) and waste
housing(1) onto the waste from backside of
bath in sequence. Tighten all the above parts
together.
Check all the joints for leaks.
To fill the bath press down on the drain cover,
press the cover again to empty the bath water.

Troubleshooting
Issues heck
Water leak Is there damage to the rubber washer(2,3,15)
Is there damage to the sealing ring(6)
Is there damage to the rubber seal(11)
Is the retaining nut(13,16) fully tighten
Has the drain cover( ) been screwed fully onto
the spring core(5)
Maintenance and leaning
To maintain the surface of your product, wipe with a clean damp cloth and wipe dry, do
not use any abrasive cleaning agents or materials.
If any harsh chemicals come into contact with the surface of the product, rinse and wipe
clean immediately.