Better Bathrooms Arissa ARIMB001 User manual

Product
Arissa Mini Cloakroom Basin Mixer Tap - ARIMB001, ARIBB001, ARICH001,
ARIMW009, ARIVRG001
Arissa Mono Basin Mixer Tap - ARIMB002, ARIBB002, ARICH002,
ARIMW001, ARIVRG002
Arissa Mono Hig Rise Basin Mixer Tap - ARIMB003, ARIBB003, ARICH003
Single-person assembly
Tools required
We always recommend using professional
tradespeople to install your product
V3_5/ /2022

Congratulations on your purchase
And welcome to our growing gang of savvy shoppers
We're on a mission to bring you extraordinary bat room products, for less. From modern
to traditional style ceramics, plus t e gorgeous fixtures, fittings and furniture to matc . So,
you can fall in love wit your space every single day.
As one of t e UK's largest independent bat room stores, we've received countless
awards; including t e National Business Awards UK, t e Digital Entrepreneur Awards and
being placed on T e Sunday Times Fast Track 100.
We ope your new product goes above and beyond your expectations. However, s ould
any problems occur, please:
log in to your account and contact our customer services team via your self-serve
portal – betterbat rooms.com/CustomerAccount/Login
contact us via betterbat rooms.com/content/contact-us
Important information
Please read t ese instructions t oroug ly and retain for future reference
Installation must be carried out in compliance wit T e Water Fittings Regulations
and Scottis Water Byelaws.
T e system must be flus ed prior to installation
Minimum and Maximum working pressure : 1 - 5 bar
Pressures must be equal for optimum performance
Please do not connect ot and cold water supply lines in reverse. T is could result
in ot water flowing from cold line and cause scalding.
T e feed-water temperature of water s all not exceed 85°C.
Exceeding 85°may cause scalding, t e service life of faucets mig t be s ortened,
or t e faucet mig t be damaged.
After installation, please make sure t e faucet is securely mounted and c ecked for
leaks.

Parts / Diagrams
Round Mini Cloakroom Basin Mixer Tap
N
o
Description
1 Handle assembled
2 Dome
3 Locknut
4 Cartridge
5 Body assembled
6 Aerator wit ousing
7 Rubber was er
8 Gasket
9 Leg
10 Locknut
11 Screw
12 Flexible ose
Round Mono Basin Mixer Tap
No Description
1 Handle assembled
2 Dome wit locknut
3 Cartridge
4 Body assembled
5 Aerator wit ousing
6 Rubber was er
7 Gasket
8 Leg
9 Locknut
10 Screw
11 Flexible ose

Round Mono High Rise Basin Mixer Tap
No Description
1 Handle assembled
2 Dome wit locknut
3 Cartridge
4 Body assembled
5 Aerator wit ousing
6 Rubber was er
7 Gasket
8 Leg
9 Locknut
10 Screw
11 Flexible ose
Dimensions
Tools required

Screwdriver
Installation
Install t e flexible oses wit inlets in t e
body(if t e oses were not pre-
assembled).
Remove t e Screws, Locknut, Metal
gasket, Rubber Was er from t e mixer
body .
T e flexible oses are pre-assembled
wit t e body from t e factory.
Ensure t e o-ring is fitted between t e
base and basin/top.
From above basin, pus t e inlet oses
t roug t e ole on basin and position
correctly.
Do not allow t e oses to be
kinked or twisted
From underneat basin, secure mixer
body by placing Rubber Was er, Metal
gasket onto t e leg, followed by fixing
Locknut and screws.
Tig ten t e Locknut and screws by
screwdriver until mixer is secure, do not
overtig ten as t is could crack t e
ceramic

Connect t e ot and cold flexible oses
to t e isolation valves (not included), ot
on t e left, cold on t e rig t.
Turn on water supply and c eck for leaks.
Operation
By lifting t e Lever Handle upwards, t e valve will be activated. Water flow will increase by continuing to lift
up t e Lever Handle. By rotating t e Lever Handle counter-clockwise, t e water temperature will decrease.
By rotating t e Lever Handle clockwise, t e water temperature will increase.

Troubleshooting
Issues Inspection Item
Mini Cloakroom Basin Mixer Tap Mono Basin Mixer Tap
Poor water flow Is t e mixer cartridge(4) free
from debris
 Is t ere blockage wit in t e
filter mes on aerator(6)
Is t e flexible ose(12) kinked
or twisted
Was t e system flus ed prior
to installation
Is t e mixer cartridge(3) free
from debris
 Is t ere blockage wit in t e
filter mes on aerator(5)
Is t e flexible ose(11) kinked
or twisted
Was t e system flus ed prior
to installation
Water leak Is t e locknut(3) on top of
cartridge fully tig tened
Is t ere damage or dirt wit in
t e O-rings of t e cartridge(4)
Is t ere damage or dirt wit
t e rubber was er or O-ring of
t e aerator(6)
Is t e ousing of aerator(6)
fully tig ten
Is t ere damage wit t e
rubber was er(7)
Is t ere damage wit in t e
rubber was er inside t e nuts
of flexible oses(12)
Is t ere damage wit t e O-
rings on t e flexible oses(12)
Is t e locknut(2) on top of
cartridge fully tig tened
Is t ere damage or dirt wit in
t e O-rings of t e cartridge(3)
Is t ere damage or dirt wit
t e rubber was er or O-ring of
t e aerator(5)
Is t e ousing of aerator(5)
fully tig ten
Is t ere damage wit t e
rubber was er(6)
Is t ere damage wit in t e
rubber was er inside t e nuts
of flexible oses(11)
Is t ere damage wit t e O-
rings on t e flexible oses(11)
Handle loose Is t e screw inside t e andle
(1) fully tig tened
Is t e screw inside t e andle
(1) fully tig tened
Body loose Are t e locknut(10) and
screw(11) underneat fully
tig tened
Are t e locknut(9) and screw(10)
underneat fully tig tened

Maintenance
Replacement of Cartridge
Round Mini Cloakroom Basin Mixer Tap
A: Uninstall t e lever by rotating anti-
clockwise. Remove t e screw by using allen
key. Take out t e andle.
B: Remove t e Cap, locknut(by using
wrenc ), cartridge from t e body
accordingly to t e grap .
Install a new catridge in reverse steps.
Round Mono Basin Mixer Tap
A: Uninstall t e lever by rotating anti-
clockwise. Remove t e screw by usign allen
key. Take out t e andle.
B: Loose t e Cap wit locknut by using a
plier to clamp t e blocks inside and rotate
anti-clockwise, take out t e cap and
cartridge from t e body accordingly to t e
grap .
Install a new catridge in reverse steps.
Replacement of Aerator
Cleaning
To maintain t e surface of your product, wipe wit a clean damp clot and wipe dry, do
not use any abrasive cleaning agents or materials. If any ars c emicals come into
contact wit t e surface of t e product, rinse and wipe clean immediately.