Better Bathrooms BeBa 27398 User manual

Product name –Matt Black Round Basin/Brushed Brass
Round Basin/Brushed Gun Metal Round Basin
Product code - BeBa_27398/BeBa_27399/BeBa_27400
•Single-person assembly
•Tools required
•We always recommend using professional
tradespeople to install your product V2_07.09.2021

Congratulations on your purchase
And welcome to our growing gang of savvy shoppers
We're on a mission to bring you extraordinary bathroom products, for less. From modern
to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So,
you can fall in love with your space every single day.
As one of the UK's largest independent bathroom stores, we've received countless
awards; including the National Business Awards UK, the Digital Entrepreneur Awards and
being placed on The Sunday Times Fast Track 100.
We hope your new product goes above and beyond your expectations. However, should
any problems occur, please:
•log in to your account and contact our customer services team via your self-serve
portal –betterbathrooms.com/CustomerAccount/Login
•contact us via betterbathrooms.com/content/contact-us
Important information
.Observe all local plumbing and building codes.
. Inspect the waste and supply tubing, replace if necessary.
.Prior to installation, unpack the new basin and carefully inspect it for damage. Return
the basin to its protective carton until you are ready to install it.
.For replacement installation, make sure the existing cutout is the same or smaller size as
the new basin.
.Make the correct size cutout as per dimension drawing provided.
. The product complies with EN 14688：2015+A1：2018.
NOTE:
Your basin does not include an overflow, therefore please ensure the plug is always left
open and tap is turned off when not in use to prevent any potential water spillage.

Parts / Diagrams
Tools required
•Safety Glasses
•Pencil
•Tape Measure
•Silicone/Gun
•Drill
•Adjustable Wrench
•Jigsaw
Dimensions
1. Stainless steel basin
2. Click-Clack pop-up waste

Installation .((
(If the basin is being installed onto an uncut top)
•Select the location of the basin on the top
•Allow enough space between the basin and mixer to the wall.
•Measure the diameter of the basin waste back nut and waste trap
nut being used to determine the hole size required, then draw this
onto the top for the hole to be drilled, if not pre-drilled.
•Drill a hole on the inside of the cutout mark to allow insertion of
Jigsaw blade to cut the hole.
•Cut the opening in the countertop along the inside edge of
the marked line.
•Drill the mixer installation hole accordingly to the
mixer dimension if required.
•Apply silicone to any cut face and allow to dry to prevent
moisture penetration
•Install the mixer to the top and the waste to the basin according to
the manufacturers instructions.
•Apply sealant to the bottom edge of the basin.
•Carefully position the basin over the cutout, so the waste tail goes
through the hole and press down firmly.
•Immediately wipe away any excess sealant, and fill any voids
as needed.
•Verify that the basin has not moved out of position.
•Allow the sealant to dry before use.
•The connect the waste trap to the waste and water supply
pipes to the mixer

Maintenance & Cleaning
The surface of your decorated product can be easily scratched.
Do not use bristle brushes, abrasive sponges or abrasive cleaners.
Keep the basin clean and dry by wiping with a soft cloth after use.
Do not allow cleaners to soak/dry onto the surfaces.