BetterLiving BL1140 Manual instruction

Please read these instructions
before use.
This stool is designed as a
temporary seating aid only;
do not use as a step.
This product is suitable for
use in showers, bathrooms or
wet areas; it is not suitable for
use in a swimming pool.
Adjusting the height
The stool is height adjustable to match individual
requirements or uneven surface.
A series of holes along each leg allow seat height to be
adjusted from 460 to 590 mm.
A clip is used to secure the height of each leg.
To adjust height, remove the
clip and slide the leg up or
down to align holes at the ideal
height. Fully insert the clip to
secure.
Repeat for all four legs,
adjusting height evenly or
individually to match an uneven
floor surface.
Before use, ensure the stool is
stable and resting firmly on the
floor’s surface.
Ideal seat height
Ideal height is when the user’s feet rest
flat on the floor, with thighs parallel to
the ground or slightly angled with hips
just above knee level. Knees should
never project above the upper leg.
adjustable adjustable
rubber feet
clip off
The Aluminium Shower
Stool with Clip On
Seat is manufactured
from lightweight
aluminium, for increased
resistance to corrosion,
with a blow moulded clip
on seat for easy cleaning
and hygiene.
It comes fully assembled.
Aluminium Shower Stool Clip-On Seat
SET-UP AND OPERATION

Removing the seat
To remove the seat, hold the frame and pull firmly on the seat
until the clips detach.
To reattach, align the seat clips over the frame and push down
firmly. Some strength may be required; it may help to sit on the
seat for extra force.
Regular maintenance
The leg clips should be regularly inspected to ensure they are
fully inserted and firmly attached. Do not use the stool without
all four leg clips inserted, or if the seat is cracked or deformed.
Regularly check the condition of the rubber tips and replace
immediately if you see evidence of rips, tears, cracks or other
general wear.
Care & cleaning
To clean the seat after each use, wipe with a mild soap and
warm water solution and rinse well. Dry with a clean cloth.
For heavier soiling, wipe clean with a diluted bleachsolution
and rinsewellbeforedrying. Donot usewater temperatures in
excessof80°c.
It isrecommendedthe frame becleaned afterheavyuseor atleast
onceaweek.Toclean the frame, wipe clean with a soft clean
cleanser and warm water solution and rinse well.
For a thorough clean, separate all parts (legs, clips, seat, frame
and fasteners) and wash individually with warm soapy water.
Dry thoroughly before reassembly.
Avoid harsh, abrasive cleaning agents or utensils (such as a
wire brush) as these can lead to deterioration of the frame and
seat.
Warranty
Novis Healthcare Pty Ltd warrants this product for a period
of 12 months. Please refer to our Warranty Statement for full
details.
Please contact your authorised dealer or the manufacturer for
a list of available spare parts.
Specifications
CODE BL1140
MAXIMUM USER WEIGHT 110 kg
PRODUCT WEIGHT 2.6 kg
OVERALL WIDTH 530 > 550 mm
SEAT WIDTH 410 mm
OVERALL DEPTH 450 > 490 mm
SEAT DEPTH 365 mm
OVERALL HEIGHT 600 > 730 mm
SEAT HEIGHT 460 > 590 mm
WARRANTY 1 year
CONFORMS TO
ARTG 176831
AS/NZS 3973:2009,
AS/NZS 4688.2:2000,
AS/NZS 4688.3:2000
MADE IN TAIWAN
Aluminium Shower Stool Clip-On Seat
pressure care and patient handling specialists
novis.com.au /1300 738 885