BHG Archer Ridge User manual

STOP DON’T RETURN TO STORE
1
BHG Archer Ridge 12ft x 10ft Fabric Gazebo-- Brown Fabrics
ASSEMBLY INSTRUCTIONS
ITEM# BH16-092-099-59
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
Questions, problems, missing parts with this product? Do not return to your
retailer, please call our customer service department 9:00 a.m. to 5:00
p.m.Eastern Standard Time Monday through Friday Phone # [phone].
contact us at www.numarkcustomerservice.com.

STOP DON’T RETURN TO STORE
2
WARNINGS AND CAUTIONS
＊It is essential to place the gazebo on level ground and not less than 6 feet
from any obstruction such as fences, garages, the house, overhanging
branches, laundry lines, or electrical wires.Assembly by four adults is
＊Assembly by six adults is recommended.
＊Oil all metallic moving parts during usage season.
＊Always remove the canopy in heavy wind conditions, otherwise the canopy
may tip over and may cause damage to its parts.
＊The user of this gazebo should always inspect it before each use.
＊Do not discard any of the packaging until you have checked that you have
all the parts and pack of fittings.
＊Keep children away during assembly.This item contains small parts which
can be swallowed by children.Children should always be under direct adult
supervision while using the product.
＊The manufacturer will not accept responsibly for unauthorized repair of
modifications to the gazebo.
＊Retain the assembly instructions for future reference.
CLEANING AND MAINTENANCE
Wash frame parts and fabric with mild soap and water, rinse thoroughly.
Dry frame completely and allow the fabric to drip dry.
Do not use bleach, acid, or other solvents on the fabric or frame parts.
Please inspect and tighten all bolts or fasteners on a regular basis to
ensure proper performance and safety of your gazebo.
＊
＊
＊
Keep all flame and heat sources away from canopy fabric.
The canopy is made with flame-resistant fabric which meets CPAI-84 specifications.
It is not fireproof. The canopy fabric will burn if left in continuous contact with
flame source. The application of any foreign substance to the canopy fabric may
render the flame-resistant properties ineffective.
＊

STOP DON’T RETURN TO STORE
3
Remove all components from the polybag and unwrap all package materials. Please
count the components, there are:
NO.
Part
Description
Quantity
A
4
B
2
2
D
2
G
8
H
4
E
C
2
F
1
I
1
Leg Post
Top Beam
Canopy Frame
Supporting Bar
Connecting bar
Small Canopy Fabric
Top Beam
Top Beam
Top Beam
J
1
K
1
L
Mosquito Net
1
M
Large Canopy Fabric
Center Canopy
Fabric
Apron Panel
4

STOP DON’T RETURN TO STORE
4
A
D
E
B
C
G
H
I
J
K
L
M
F

NO.
Part
Description
Quantity
N1
M6x15L Bolt
20+2 Spare
N2
M6x20L Bolt
40+2 Spare
N3
M6x25L Bolt
16+1 Spare
N5
92
N6
8+1 Spare
N7
4
N8
8
N9
2
M6 Washer
M6 Nut
U Shaped Bracket
Bracket
Allen Wrench
N4
M6x36L Bolt
STOP DON’T RETURN TO STORE
5
N10
2
N11
Lawn Stake
8
N12
Long Allen wrench
1
Hex wrench
8+1 Spare
ACCESSERY

STOP DON’T RETURN TO STORE
6
Step1
Please don’t tighten the bolts fully at this step.
Step2
Please don’t tighten the bolts fully at this step.
B
C
N5
N1
N7
A
N5
N1
N5
N1
N1 x 4
N5 x 4
M6 Metal Washer
N7 x 4
M6x15L Bolt U Shaped Bracket
N1 x 16 N5 x 16
M6 Metal Washer
M6x15L Bolt
D
E
N1
N5
N5
N1

Step3
Step4
STOP DON’T RETURN TO STORE
7
N5
N2 N8
D
E
C
B
A
N2 x 24
M6x20L Bolt
N5 x 24
M6 Metal Washer
N2 x 16 N5 x 16
M6x20L Bolt M6 Metal Washer
N8 x 8
Bracket
Please don’t tighten the bolts fully at this step.
Please don’t tighten the bolts fully at this step.
D
B
C
E
N5
N2
A

STOP DON’T RETURN TO STORE
8
Step5
Step6
Tighten all bolts of this step.
N3 x 16 N5 x 16
M6 Metal Washer
M6x25L Bolt
Long
Long
Short
Short
I
F
F
IF
I
Make sure the side of canopy fabric with a label “Long” and “Short”corresponds to the
canopy frame F also with a label “Long” and “Short”.
Please don’t plug the canopy J into the supporting Bar G at this step.
G
G
F
F
F
N3
N5
G
H
Long
Short
F
J
I
Long
Long
Short
Short
Short
Long

STOP DON’T RETURN TO STORE
9
Step8
Tighten all bolts of steps above.
N4 x 8 N5 x 16
N6 x 8
M6 Nut
M6x36L Bolt M6 Metal Washer
Make sure the canopy frame F with a label “Long”, “Short”corresponds to the top beam
D&E with a label “Long”,top beam B&C with a label “Short”.
Once all bolts are tightened ,plug the canopy J into the supporting Bar G at
this step.
Step7
N5
N5
H
N6
N4
N7
N4
N5
N5
N6
F
B / C
Short
F
Long
Long
Short
K
D / E
K
F
Long
Long
Short
K
B / C
Short
Make sure the side of canopy fabric with a label “Long”, “Short”corresponds to the top
beam D&E with a label “Long”,top beam B&C with a label “Short”.
J
I
J
I
K

Step9
STOP DON’T RETURN TO STORE
10
Step10
Make sure the side of the apron panel with a label “Long” corresponds to the
top beam D&E also with a label “Long”.
Your gazebo is ready for use.
L
N11
N11
L
C/
B
N11 x 8
Lawn stake
Printed in China.
Hang the mosquito net (L) on the top beam (B,C).
M
DE/
M
Long
Long