Landscape Fusion L1336D User manual

ASI 261A
Assembly Instructions for L1336D and L1336M, 32-Gallon Receptacle
A
SSEMBLY INSTRUCTIONS
Landscape Brands
211 N. Lindbergh Blvd.
Saint Louis, MO 63141-7809
800-231-1327
Fax: [phone]
E-mail: [email protected]
Web: www.landscapebrands.com
Parts List Hardware Included Tools Needed
1-Receptacle 1-Fabric Tether
1-Plastic Liner
1-Contour or Dome Top
Assembly Recommendations
To prevent scratching on any of the finished pieces, we recommend assembling the unit on packing
material (paper and cardboard). Do not drag assembled unit on any surface. The assembly is a two-
person operation.
Mounting Recommendations
For surface mounted product, we recommend the use of stainless steel mounting studs. For any other
follow assembly instructions.
Cleaning Recommendations
For cleaning, use mild household cleansers or soap and water.
Do not use vinyl cleansers or protectants.
Receptacle
Plastic Liner
Contour Top
Dome Top

ASI 261A
i
i
A
SSEMBLY
INSTRUCTIONS
Fusion Coatings, A Division of RTM, Inc.
1101 East 8th Street
Winona, MN 55987
Toll Free: 1-800-367-9638
FAX: [phone]
E-mail: [email protected]
Web: www.fusioncoatings.com
1. Place receptacle in appropriate location with opening facing up.
2. Place plastic liner inside receptacle with opening facing up.
3. Attach grommet end of fabric tether to receptacle using one of the existing holes in the top
portion of the receptacle as shown in Diagram #1 (fasteners not included).
4. Attach spring snap, on end of fabric tether, to tie-down ring on contour or dome top as
shown in Diagram #1.
5. Place contour or dome top on receptacle.
Diagram #1