Big Lots HARLOW 15160-5PK User manual

1
BIG LOTS
ASSEMBLY INSTRUCTIONS
SKU NO. 810321490
Big Lots Customer Care
Phone # : 1-866-BIGLOTS(1-866-244-5687)
Email Add : [email protected]
'For spare screw and bolts, please contact big lots customer care'
HARLOW 5 PCS PUB SET
ITEM NO. 15160-5PK

2
1. Please read the assembly instructions prior to assembling this product.
2. To avoid damages, assemble this product on a non-abrasive surface such as carpet.
3. Make sure all bolts and nuts are tightly fastened before the product is used.
4. Not for commercial use.
5. Care: Wipe with a damp cloth. Use furniture polish or lemon oil on the wood as
needed. Avoid prolonged exposure to moisture.
Please make sure you have all parts before beginning assembly. Please wait until
all steps are completed before tightening bolts. We recommend two people to
assemble.
A phillips head screwdriver is necessary for assembly.
Do not put hot post or objects which are more than 80
degrees Fahrenheit directly on the table surface.
GENERAL INFORMATION, TIPS & TRICKS

3
1. FLAT WASHER
SIZE: 5/16" DIA
QTY: 8 PCS
2. SPRING WASHER
SIZE: 5/16" DIA
QTY: 8 PCS
3. BOLT
SIZE: 5/16" x 3"
QTY: 8 PCS QTY: 1 PC
A
B
4.OPEN WRENCH
PUB TABLE PART LIST
A. TABLE TOP 1 PC
B. TABLE LEG 4 PCS
PUB TABLE HARDWARE LIST
SIZE: #12mm

4
B
B
A
PUB TABLE ASSEMBLY INSTRUCTIONS
1.Place table top (A) upside
down on a non-abrasive surface
such as carpet (underside of
tabletop should be facing up ).
2. Attach the legs (B) to the
apron of table top (A) using 8
flat washers (1), 8 spring
washers (2), and 8 bolts (3) as
shown.
DIAGRAM #1
REQUIRED HARDWARE IN THIS STEP
NO
1
2
3
4
FLAT WASHER 8 PCS
SKETCH QTY
DESCRIPTION
SPRING WASHER
BOLT
OPEN WRENCH 1 PC
8 PCS
8 PCS
B
B
A
B

5
DIAGRAM #2
The Table is now ready for use
PUB TABLE ASSEMBLY INSTRUCTIONS
3. With assistance, carefully turn the table upright. Ensure the table is level and
tighten all bolts (3) using the open wrench (4).

6
1. FLAT WASHER 2. SPRING WASHER
7. WOOD SCREW
SIZE: 5/16" DIA SIZE: 5/16" DIA
C
F
EG
D
I
BAR STOOL PART LIST
C. CHAIR BACK 4 PCS
D. SEAT FRAME 4 PCS
E. LEFT FRONT LEG 4 PCS
F. RIGHT FRONT LEG 4 PCS
G. FRONT STRETCHER 4 PCS
H. LEFT STRETCHER 4 PCS
I. RIGHT STRETCHER 4 PCS
BAR STOOL HARDWARE LIST
QTY: 44 PCS QTY: 44 PCS
3. BOLT
SIZE: 1/4" x 1-3/4"L
QTY: 12 PCS
4. BOLT
SIZE: 1/4" x 2-5/9"L
QTY: 16 PCS
QTY: 1 PCQTY: 16 PCS QTY: 24 PCS
SIZE: 1/4" x 3-3/8"L SIZE: 4 x 50
H
5. BOLT 6. OPEN WRENCH
SIZE: #12mm

7
BAR TOOL ASSEMBLY INTRUCTIONS
DIAGRAM #3 REQUIRED HARDWARE IN THIS STEP
NO
1
2
4
6
FLAT WASHER 4 PCS
SKETCH QTY
DESCRIPTION
SPRING WASHER
BOLT
1 PC
OPEN WRENCH
4 PCS
4 PCS
1. Attach Left Front Leg (E) and Right Front Leg (F) to Seat Frame (D) using 4
Flat Washers (1), 4 Spring Washers (2) and 4 Bolt (4) as shown. Do not fully
tighten all bolts at this time. Insert the Front Stretcher (G) into the holes of the
Left Front Leg (E) and Right Front Legs (F) as shown and attach using 2 Wood
Screws (7). Fully tighten the screws.
7
72 PCS
WOOD SCREW

8
DIAGRAM #4
REQUIRED HARDWARE IN THIS STEP
NO
1
2
3
6
FLAT WASHER 7 PCS
SKETCH QTY
DESCRIPTION
SPRING WASHER
BOLT
7 PCS
3 PCS
OPEN WRENCH 1 PC
5BOLT 4 PCS
74 PCS
WOOD SCREW
BAR TOOL ASSEMBLY INTRUCTIONS
2. Attach Seat Frame (D) to Chair Back (C) using 3 Bolts (3), 4 Bolts (5), 7 Spring
Washers (2) and 7 Flat Washers (1) as shown. Do not fully tighten bolts. Insert the end of
Left Stretcher (H into the holes in Left Front Leg (E) and Chair Back (C). Secure using 2
Wood Screw (7). Fully tighten screws. Insert the end of Right Stretcher (G) into the holes
in Right Front Leg (F) and Chair Back (C). Secure using 2 Wood Screw (7). Fully tighten
screws.
3. With assistance, carefully turn the assembled chair upright. Make sure the assembled
chair is level and square tighten all bolts (3 & 5) with Open Wrench ( 6)

9
The bar stool is now ready for use.
6. Repeat diagram #3 to #5 to assemble the other chairs.
DIAGRAM #5
Printed in Viet Nam
BAR TOOL ASSEMBLY INTRUCTIONS