Biketronics RetroRadio BT100 User manual

Page 1of 2
Page 1of 2
Biketronics Inc.
Tel. [phone]
Fax [phone]
www.biketronics.com
Reuse short screw
from Harley-here
Only 3 screws total (2
long and 1 short) are
used to secure each
speaker to fairing
RetroRadio Power Grill
Installation Guide
Reuse short screw
from Harley-here
Only 3 screws total (2
long and 1 short) are
used to secure each
speaker to fairing
BT100
For 1996 to present
Harley Davidson FLHT
BT100
For 1996 to 2011
Harley Davidson FLHT
RetroRadio Power Grill
Installation Guide
Notch on side
of adapter
mates with
boss’ on
fairing
Notch on side
of adapter
mates with
boss’ on
fairing
Use new long-screws
(#10 x 2" –in kit) in
these 2 locations
(Use a little grease)
---WARNING---
Do not install any
screw in lower
inside corner!
Biketronics Inc.
Tel. [phone]
Fax [phone]
www.biketronics.com
Use new long-screws
(#10 x 2" –in kit) in
these 2 locations
(Use a little grease)
---WARNING---
Do not install any
screw in lower
inside corner!

Page 2of 2
Page 2 of 2
age 2 of 2
Position speaker adapters
for embossed words
“Biketronics Power Grill”
to face toward top of
fairing
Position speaker adapters
for embossed words
“Biketronics Power Grill”
to face toward top of
fairing
Best speaker position is
the 12:00 o’clock position
for speaker terminals
Best speaker position is
the 12:00 o’clock position
for speaker terminals