Billi B–1000 User manual

User guideB–1000
Instant Filtered
Water System

User guide
B–1000.
2
Thank you for choosing to install
a Billi B–1000 Instant Filtered Water
System. Your B–1000 is manufactured
to exacting standards using high quality
materials and with proper maintenance
and care, should function for many years.
The Billi service representative to
contact for any service requirements
or to supply replacement filter
cartridges is:
Filter cartridges are also available
online at www.billihome.com.au
Should any problems arise and our
representative is unavailable or unable
to help, please use our FREECALL
phone number: 1800 812 321.
Insert agent details

User guide
B–1000.
Product warranty
Subject to the provisions of this product
warranty, if a defect in a new product supplied
by Billi Pty Ltd (ACN 124 066 717) ("Billi") and
purchased by you ("customer") from a reseller
authorised by Billi occurs within 12 months of
the date of purchase of the product, as a result
of defective materials or defective manufacture
by Billi, Billi will, in addition to other rights and
remedies held by the customer under a law in
relation to the goods and services to which this
product warranty relates, either (at its option):
1. direct an accredited service provider
to attend the customer's premises
(provided that the premises are located
within Australia) and repair the defect
free of charge; or
2. direct the customer to return the
product to Billi so that Billi may provide
a replacement product free of charge.
Our goods come with guarantees that
cannot be excluded under the Australian
Consumer Law. You are entitled to a
replacement or refund for a major failure
and for compensation for any other reasonably
foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced
if the goods fail to be of acceptable quality and
the failure does not amount to a major failure.
In order to make a claim under this warranty,
the customer must provide Billi with a written
claim containing details of the product defect,
together with a receipt from the reseller of
the products showing the date of purchase of
the products, or such other proof of purchase
and the date of purchase as Billi may accept,
within 13 months of the date of purchase.
If the customer's premises are located
more than 25 kilometres from one of Billi's
authorised service agent's locations, the
customer will be liable for any increased
freight costs, fees, charges or levies
Billi may incur as a result of fulfilling its
obligations under this Product Warranty.
Where a replacement product is provided by
Billi, Billi will pay the necessary freight charges,
and the customer will pay for the removal of
the product and the costs of reinstalling the
replacement product. Any product replaced or
repaired under this Product Warranty will be
covered by the product's remaining warranty
period, or three months, whichever is greater.
If the product or any part thereof is replaced by
Billi under this Product Warranty, all of the right,
title and interest in and to the replaced product
or part shall vest in Billi upon it being replaced.
—Warranty exclusions
Billi shall not be liable under this
Product Warranty:
1. unless the product was installed
correctly and as per the installation
instructions supplied with the product;
2. if the defect is contributed to or caused
by any improper usage of the product
or usage of the product for purposes
other than that for which the product
was designed or intended;
3. if the defect occurs wholly or partially
as a result of any act or omission by the
customer, or any person other than Billi;
4. if the product is subject to misuse,
neglect, accident or abuse or the
customer continues to use the product
after the defect becomes apparent;
5. if the product is damaged as a result
of poor water quality;
6. if the product is repaired, or any attempt
to repair the product is made, by anyone
other than an authorised repairer of the
products acting at Billi's direction;
3

User guide
B–1000.
4
7. if the product is altered or modified in
any way unless such modification has
been approved in writing by Billi.
Notwithstanding anything to the contrary,
filters are not covered by this (or any other)
Product Warranty.
Warnings
– For continued safety of this appliance it
must be installed, operated and maintained
in accordance with the manufacturer's
instructions.
– Your appliance should be installed
by a suitably qualified tradesperson.
– For correct operation of this appliance
it is essential to observe the instructions
as outlined in this booklet.
– Do not use this appliance with water
that is microbiologically unsafe or with
water of unknown quality without adequate
disinfection before the system. Systems
certified for cyst reduction may be used
on disinfected water that may contain
filterable cysts.
– Filter replacement must be performed
at intervals of not more than 12 months.
– Use this appliance only as directed
in these instructions and only for its
designed purpose.
– This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
– Children should be supervised to ensure
that they do not play with the appliance.
– If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid creation of a hazard.
– New hose sets supplied with the appliance
are to be used. Old hose sets should not
be re-used.

5
User guide
B–1000.
General maintenance
Your Billi B-1000 has been designed to require
minimal maintenance other than replacement
of filter cartridges. During each filter change,
check all water connection fittings for signs
of leakage. Check all tubing for any signs of
damage. Check the cupboard area around
the base of unit for any signs of moisture.
Cleaning the dispenser
Your filter tap dispenser is fabricated from
robust metal with tough protective chrome
plating. Care for the dispenser as with any
chrome plated tap ware. Avoid using abrasive
cleaners. Wipe clean using a damp cloth.
Use of a non solvent, non smearing cleaner
such as Windex is recommended. Do not
pour water over the dispenser.
Unit operation
—Slimline dispenser
To dispense filtered water, the dispenser tap
lever will need to be rotated. The lever will
automatically return to the o position. The
spout can be swivelled to suit your installation.

User guide
B–1000.
6
—Billi filter cartridges
The B-1000 features the Billi dual stage
filtration system. It is fitted with single
dual stage filter incorporating sediment
and chemical removal elements. All B-1000
filters are manufactured using bacteria and
biofilm resistant materials for improved
water quality.
Premium filters provide a better tasting
water due to the high quality, carbon
chemical removal filter. Sub micron rated,
these filters have excellent chemical
absorption, removing or reducing chlorine,
volatile organic compounds (VOCs), chemicals,
tastes and odours. Use only genuine filters
as designed for this system. All drinking
water filtration systems should be flushed
after a period of non-use.
—Replacement of filter cartridges
Periodic replacement of your B-1000
filter cartridge is necessary to maintain
the cleanliness of your drinking water.
Billi recommends a filter replacement
every 12 months. A replacement filter
change installation service is available.
If you wish to install the replacement filter
cartridges yourself, your Billi representative
will provide genuine Billi replacement filter
cartridge sets.
—Filter options
—990355 Sub-micron rated replacement
filter cartridge.
—990356 Premium sub-micron rated
replacement filter cartridge.
Use only genuine Billi filter cartridges
as designed for this system.
If the system has not been used for a period
of 48 hours or more, lift the dispenser lever
and flush the system for at least 1 minute.

7
User guide
B–1000.
User service
—Replacing Filter Cartridge
1. Turn o blue tap under bench.
2. Operate dispenser lever to release pressure.
3. Hold filter and swing towards you slowly.
The top of the filter is in a hinged cradle
assembly. It should stop after approximately
30 degrees of travel.
4. The filter can now be released from the
holding cradle by pulling down on the filter.
5. Take care not to spill water in the base of the
tray. If so wipe gently with absorbent paper.
6. Install new filter into the same location
by pushing all the way up into the cradle.
7. Push filter back into the unit until it locks into
place. Power light should come back on.
8. Turn on blue tap under bench and check
for water leaks.
9. Operate dispenser lever and run water for 3
minutes to flush and condition the new filter.

Billi Pty Ltd
42 Lucknow Crescent, Thomastown
Victoria 3074 Australia
Telephone [phone]
Facsimile [phone]
www.billihome.com.au
Designed and manufactured in Australia.
As Billi Pty Ltd has a policy of continual
improvement, all details are subject
to change without notice. All goods
are sold subject to our published terms
and conditions. Billi is a registered
trademark. 1212