Binatone Speakeasy Combo 3410 User manual

USER GUIDE
Before operating this set,
please read these instructions carefully.
Speakeasy Combo 3410
CORDED AND
DIGITAL CORDLESS
TELEPHONE WITH
ANSWERING MACHINE
UK BTP Ver 3, Nov 07
Remark:this guide is for the corded part only, and that for instructions .
on how to use the cordless part, to see the other user guide.

Important note — emergency calls
The SC3410 cordless handset is not designed for
making emergency calls when the mains power fails.
But, if there’s a power failure, you can use the base
unit telephone to make an Emergency Call, by lifting
up the corded handset instead of using the
speakerphone.
*** Before operating this set, please read these
instructions carefully.
If you need help …..
Binatone Helpline (for UK only)
Monday to Friday from 9:00am to 5:00pm
Tel: [phone]
**Please note that all calls are charged at local rate
Or visit our website:
http://www.binatoneonline.com
Unpacking your SC3410 system
In the box, you will find:
Ƶthe base unit telephone
Ƶa telephone line cable for the base unit
Ƶa mains power adapter for the base unit
Ƶthe cordless handset (up to five, depending on
which SC3410 system you’ve bought)
Ƶtwo user guides, one for the corded phone and one
for the cordless handset.
Ƶup to five charger pods, each with a mains power
supply for multi handset systems
Ƶtwo copies of user guide: one is for corded phone,
one is for cordless
Keep the packaging materials in a safe place in case
you later need to transport the unit.
Keep your sales (till) receipt, which is your
guarantee. Note: After lifting the handset you
Note: After lifting the handset you will need to wait
for several seconds to get dial tone, before keying in
the telephone number to make the call.
Also you cannot dial numbers from memories when
the mains power is off.

Binatone Help Line : 0845 345 9677 1
LCD Display
One-touch Memory M1, M2
Press to call numbers
stored on One Touch
memory
Ringer Indicator
Menu/Ok/Mute /OK
Press to access menu
Press as “OK” key to confirm your
operation
Press to mute/un-mute microphone
during a call
Phonebook/Back /C
Press to access phonebook
records
Press to exit present menu
Speakerphone light
Turns ON when using the
speakerphone
New Call light
Flashes when you have new
Caller display records.
R(Recall)
You may need this function if your
phone is connected to a PBX, or if
you use BT Calling Features.
Stop/Answer on/off
Press to stop recording
or playback.
Press & hold to switch
the answering machine
ON or OFF.
With TAM ON in standby
mode, press to select
OGM1 & OGM2
Message Light
Turns ON when the TAM
is ON.
Flashes when you have
new TAM messages.
SOS Call
Press and hold for 2 seconds
to activate the SOS call
Speakerphone
Press to call or answer a call
by using the speakerphone.
Microphone
For speakerphone and
answering machine recording.
Where to find it
Important:
When the instruction simply say ‘press’ a button, this means you should press it briefly then
release it.
When the instruction say ‘press and hold’ a button, this means you should keep it pressed
until the display changes or you hear a tone.
Pres
messages, memos,
stored numbers or
Call
Delete(DEL)
s to delete
er Display records.
Memo/Skip
Press and hold to
record a memo
Press during message
playback to go forward
to next message
Play/Pause
Press to playback
messages memos
Press to pause playing
of a memo or message
OGM/Rewind
Press and hold to record
OGM
Press to playback OGM
Press to go back to
previous message/s.
Intercom
Press to make an
Up-Down(CDS)
Press to access the
Caller display records
and scroll through them
Press to change earpiece
speakerphone volume
Press to scroll through
the lists and menu options
RD/P
Press to redial the
last number
Press while dialing
a number to insert
a pause
intercom call or to
transfer a call

Binatone Help Line : 0845 345 9677 2
What's on the display?
The display of your telephone contains one line with the Time/Date and Icons, one line
What do the symbols mean?
Talk x This will display when the user picks up the
handset
Ring Off x This will display when the ringer is set to
OFF
Phonebook x This will display when you are in the
phonebook menu
Voicemail x This will display when you have a new Voice
Mail message. (This is a caller id service and
is not usually available from UK network
Repeat CID x This will display when the same caller has
called more than once
New CID x This will display when there is a new CID
entry or if one is being viewed
Sequence x Indicates the sequence number of the CID
record
Hands free/speakerphone x This will display when the speakerphone is
in use
A.M. x This will display if it is A.M., in the 12 hour
clock mode
P.M. x This is display if it is P.M., in the 12 hour
clock mode
Number field: showsthe telephone
numbers
Character field: showsthe Menu,
name and status of a call
of numbers and one line of text.
providers.)

Binatone Help Line : 0845 345 9677 3
Contents
Page
Where to find it 1
What’s on the display? 2
x What the symbols mean? 2
Read First before Use 5
x Choosing a site for base unit and
charger pod 5
x Mains power connection 5
x If you have a broadband line 5
Installation and Set-up
x Choose a suitable site for the base unit
6
x Connect the mains power lead and the
telephone line cord into the base unit 6
x Plug the mainsadaptor into your wall
socket 6
x Connect the base unit to the telephone
Desk/Wall mount installation 7
Desk Mo 7
Wall Mount 7
Basic settings
x To set Dateand Time9
Making and answering calls 10
x To make call
x
Tomake acall from redial list 10
x To make a call from caller display (CID)
list10
x To answer a call 10
x
ToMute orun-mute themicrophone11
x To change the earpiece or speakerphone
volumedua call11
x
Emergencycallwithoutmainspower11
Memory/Phonebookmanagement 12
x To create a contact in your phonebook
Page
x
To delete a contact in the phonebook 13
x To delete all contacts in your phonebook
14
x
To edit a contact in yourphonebook 14
x To store a last number redial in your
phonebook
x Making calls from the phonebook
x
Reviewing phonebookmemorystatus
x
Direct MemoryCall
x
To Store the telephonenumber
x
To Speed-Dial the telephonenumber
Caller Display (CDS) / Caller ID (CID) 17
x New CID log 17
x
To review the CID list 17
x To delete a Caller ID record 18
x To delete all Caller ID records 18
x To Store a Caller ID contact in
phonebook18
Ringer volume, and melody 19
x To changeringer volume19
x
To changeringer melody19
Using multi-handset 21
x
To make intercom calls 21
x To Transfer intercomcall21
x
To setup a three-wayconference22
Telephone AnsweringMachine(TAM)
26
x Switching TAM on/off 26
x To Record your Outgoing Message
(OGM)
28
x
Toplaybackthe OGM 29
x To delete the OGM (SET OGM to
DEFAULT) 30
6
9
10
15
16
16
16
16
16
x
Switchbetween OGMs30
x
To play/pause messages onTAM 30
x To delete a message onTAM 31
13
x
x
Page / locate a handest
23
Handset registration 23
line6

Binatone Help Line : 0845 345 9677 4
x
To delete all messages on TAM 31
x
Torecord amemo on TAM31
x
Incoming Call Messages (ICM) 31
x
Remote Operation 32
x
To Set TAM alarm33
x
To setting ring number 33
x
To Change SecurityCode (TAMPIN)
34
x
To Reset TAM to default settings 34
SOS call function 35
x
How SOS callfunction works 35
x
How to terminate SOS call function 35
x
To Set SOSnumbers 35
x
ToRecordSOS voiceprompt 36
x
To Playback the SOSvoice prompt36
Advanced use ofyourPhone37
x
To Turn on/off key tone 37
x
To Set flash (Recall)time37
x
To Set Dialling Mode (Tone/Pulse)38
x
To Set Base todefault settings38
x
To Change thePIN code39
Troubleshooting 40
Cleaning and Care 42
Declaration of Conformity43
Guarantee and Service 43
Technical Details 44
Connection and conditions for use.
You can connect your Speakeasy Combo 3410 to a direct exchange line (DEL) - a line
connected to a local exchange, with its own phone number; to an extension on an approved
compatible PBX. Do not connect the Speakeasy Combo 3410 as an extension to a payphone.
The ringer equivalence numbers (RENs) of all instruments (phones, fax machines, etc.)
connected to an exchange line must not add up to more than 4 - otherwise, one or more
of them mat not ring and/or answer calls correctly. The Speakeasy Combo 3410 has a
REN of 1, and most othe telephones have a REN of 1 unless marked otherwise.

Binatone Help Line : 0845 345 9677 5
Read First Before Use
Choosing a site for the base unit and charger pod
The base unit and charger pod(s) should be placed on level surface, in a position where:
x the mains adapter plug will reach an easily accessible 230-VAC switched mains
supply socket - never try to lengthen the mains power cable
x the base unit's telephone line cable will reach your telephone line socket or
extension socket
x it is not close to a sink, bath or shower, or anywhere else where it might get wet
x it is not close to other electrical equipment - fridges, washing machines,
microwave ovens, fluorescent lights, televisions etc.
x if the base comes into contact with liquids, disconnect it promptly and use a soft
cloth to dry it; if you believe that the liquid has seeped into the unit, do not
reconnect the base station. Contact the Binatone helpline.
x it is away from hot, humid conditions and strong sunlight
Mains power connection
IMPORTANT - The SC3410 base unit must be used with the mains adapter supplied
with the unit.
Using any other adapter will result in non-compliance with EN60950, and will
invalidate any approval given to this apparatus.
If you have a Broadband line
If you connect your telephone to a line with a broadband connection, you will need to
insert a micro-filter between the telephone and the telephone line; otherwise you may
get interference between the telephone and the broadband, which could cause
problems.
In a home with broadband, every telephone must have a micro-filter connected, not
just the one at the telephone point that your modem is connected to. If you need more
broadband micro-filters, contact your broadband supplier.

Binatone Help Line : 0845 345 9677 6
Installation and Set-up
1/ Choose a suitable site for the
base unit (see page 5)
2/ Connect the mains power lead
and the telephone line cord into the
base unit
Plug one end of the telephone line
cord into the jack on the back of the
base (the other end will plug into
3/ Plug the mainsadaptor into your
wall socket. If you have one or more
charger pods, plug the mains
adaptors accordingly
Make sure that the 230VAC, 50hz mains
socket is switched OFF when you plug
the mains adapter into the socket.
4/ Connect the base unit to the telephone line
Insert the telephoneline plug into the socketthen switch
See the note
on page 5
See the note
on page 5
mains power back ON.
Make sure the mains socket is switched on —
the phone won’t work without electrical power

Binatone Help Line : 0845 345 9677 7
Desk/Wall mount installation
To place the SC3410 on a desk, connect
the stand to the bottom of the phone in the
slots near the rear of the base as shown below.
Desk Mount
Insert the rigid clips of the stand into the slots
on the bottom of the phone (nearer the centre
of the base ). Press down firmly until the
flexible clips clicks into place.
To remove the stand, (1) pinch the flexible
clips, (2) pull back the stand, and then (3)
slide up and forward as shown below.
To place the SC3410 on a wall, connect the
stand to the bottom of the phone in the slots
near the front of the base as shown below.
Wall Mount

Desk/Wall mounting continue...
Insert the rigid clips of the stand into the slots
on the bottom of the phone (nearer the centre
of the base). Press down firmly until the flexible
clips clicks into place.
To remove the stand, (1) pinch the flexible
clips, (2) pull back the stand, and then (3)
slide up and forward as shown below.
Mark two points on the wall that are 120 mm
apart to lay the fixing centers as shown below.
BE CAREFULto check that there are no
electrical wires hidden in the wall. Fix two screws
at the marked locations,leaving approximately
7mm between the wall and the the screw head.
Hang the telephone on the screws using the
wall mount slots. You may need to remove the
telephone from the wall and tighten the screws
so that the telephone is securely fixed and does
not wobble. Place the Handset on the cradle with
the parking hook on the cradle arranged to fit
in the parking recess under the earpiece on
the Handset.
BinatoneHelpLine : 0845 345 9677 8

BinatoneHelpLine : 0845 345 9677 9
Basic settings
Press the MENU/OK/MUTE button.
Then press the UP or DOWN button until "SETTINGS" is displayed.
Then press the MENU/OK/MUTE to confirm.
The display will show “DELETE HS”, Press the UP or DOWN button until
is displayed.
Then press the MENU/OK/MUTE to confirm.
When you have finished press the MENU/OK/MUTE button to confirm, you will
hear a beep and the display will show “DATE & TIME”.
Press the “PHONEBOOK” button return to the previous menu.
To set Date and Time
Note: The format for the date is YYYY-MM-DD, and the time is HH:MM in 12 hour format
The 'year' will be flashing.
Press the UP or DOWN button to set the year.
Press the MENU/OK/MUTE to confirm.
The 'month' will be flashing.
Press the UP or DOWN button to set the month
Press the MENU/OK/MUTE to confirm.
The 'date' will be flashing.
Press the UP or DOWN button to set the date
Press the MENU/OK/MUTE to confirm.
The 'hour' will be flashing.
Press the UP or DOWN button to set the hour, including the AM/PM setting
Press the MENU/OK/MUTE to confirm.
The 'minutes' will be flashing.
Press the UP or DOWN button to set the minutes.
Press the MENU/OK/MUTE to confirm.
or
or
or
or
or
or
or

BinatoneHelpLine : 0845 345 9677 10
Making and answering calls
e a call from the redial list
The phone remembers the last 10 dialled numbers. The list is in order,
with the most recent message at the top.
Press the REDIAL/PAUSE Button to view the redial list.
Press the UP or DOWN button until you see the number of the person you want to call.
Press the SPEAKERPHONE button or pick up the handset to make the call.
Press the UP or DOWN button to show the first entry in the CID list.
If your list is empty, the display will show “EMPTY”.
Press the UP or DOWN button until you see the number of the person you
want to call.
Press the SPEAKERPHONE button or pick up the handset to make the call.
When the phone rings:
Pick up the handset or press the SPEAKERPHONE button to answer the call.
RD/P
or
or
To make a call
To make a call from the redial list
To make a call from Caller Display (CID) list
To answer a call
a call
Pick up the handset and the TALK icon will appear, OR press the
SPEAKERPHONE button and the SPEAKERPHONE icon will appear.
Also the display will show “LINE IN USE”.
Use the keypad to enter the number you wish to dial.
When you have finished the call place the handset back on the base.
You can also make a call by using the Pre-Dialling function:
Dial the required telephone number first, and if you make a mistake you can
correct it by using the DEL button to delete digits and then add the right ones.
Pick up the handset or press the Speakerphone button.
The number will be dialled out automatically using the handset or
speakerphone mode selected.
* To insert a pause in the dialling sequence, press the RD/P button, which will then show
a P in the number.

BinatoneHelpLine : 0845 345 9677 11
During a call press the MENU/OK/MUTE button and the display will show
“CALL MUTED”.
To un-mute, press the MENU/OK/MUTE button and the display will show
“LINE IN USE”.
During a call press the UP button to increase or DOWN button to decrease
the Volume.
The SC3410 corded base unit can make an emergency call with the corded handset
when the mains AC power is disconnected.
x
x
or
EMERGENCY CALL WITHOUT MAINS POWER
To change the earpiece or speakerphone volume during a call
To Mute or Un-mute the microphone
Pick up the corded handset.
After lifting the handset you will need to wait for several seconds to get dial tone,
before keying in the telephone number to make the call.

It is not possible to dial numbers from memories when the mains power is off.
When the mains power is off, you can also answer an incoming call with the
When the phone rings, pick up the corded handset. After lifting the handset you
will need to wait for several seconds before you can hear the calling person's voice
corded handset. 
or before they can hear you.

BinatoneHelpLine : 0845 345 9677 12
Memory/Phonebook management
How to enter characters?
Telephone Keypad characters
To enter the characters, press the button
where you see the character e.g. if you want to
insert the letter‘A’ you press ‘2’ifyouwant to
insert the letter ‘B’ you press twice and for ‘C’,
three times etc. If you want to insert ‘AA’ then
you will have to wait for the first ‘A’ to stop
flashing then insert the second ‘A’. Press
twice for space, to delete single characters
and pressand hold to delete the whole text.
1st 2nd 3rd 4th 5th 6th
_ , ? ! ’
” ( ) : ; .
A B C 2
D E F 3
G H I 4
J K L 5
M N O 6
P Q R S 7
T U V 8
W X Y Z 9
space 0 + - @ = / \ [ ]
*
#
? !
1
7th 8th 9th 10th 11th 12th 13th 14th
á
~
ú
í
~
N

BinatoneHelpLine : 0845 345 9677 13
Press the MENU/OK/MUTE button, tosee “PHONE BOOK”.
Press the MENU/OK/MUTE button, tosee “LIST”.
Press the DOWN button, to see "NEW ENTRY".
Press the MENU/OK/MUTE button and the display will show a flashing bar at the
beginning of the name position.
Key in the name using the digit keys (maximum 12 characters). If you
make any mistakes press DELETE button to delete.
When you have finished press the MENU/OK/MUTE button to confirm,
Key in the number using the digit keys (maximum 20 digits). If you make any
Press the MENU/OK/MUTE button to confirm and the display will show
“MELODY 1”.
Use the UP or DOWN buttons to scroll through the melodies. (there are 10
melodies to choose from).
Press the MENU/OK/MUTE button to confirm your selection. You will hear a
confirmation tone, and the display will return to “NEW ENTRY”.
*If there is no more space in the phonebook, “MEMORY FULL” will appear on the
display.
Press the MENU/OK/MUTE button, to see “PHONE BOOK”.
Press the MENU/OK/MUTE button, to see "LIST".
Press the DOWN button repeatedly until you see “DEL RECORD”.
To create a contact in your phonebook
To delete a contact in your phonebook
The Phonebook can store up to 150 names (maximum 12 characters) and numbers
Also, you can select a different ringer melody for each entry, but this will only work if
(maximum 20 digits) in the memory.
you subscribe to CID (see page 16).
and the display will move the flashing bar to the beginning of the number position.
any mistakes use the DELETE button to delete.
or

BinatoneHelpLine : 0845 345 9677 14
Press the MENU/OK/MUTE button, to see “PHONE BOOK”.
Press the MENU/OK/MUTE button, to see "LIST".
Press the DOWN button repeatedly until you see "DELETE ALL".
Press the MENU/OK/MUTE button and the display will show “CONFIRM?".
Press the MENU/OK/MUTE to confirm, or press the PHONEBOOK/CANCEL button
to save the contacts.
Press the MENU/OK/MUTE button, to see “PHONE BOOK”.
Press the MENU/OK/MUTE button, to see "LIST".
Press the DOWN button repeatedly until you see“EDIT RECORD”.
Press the MENU/OK/MUTE button and the display will show the first
name and number in your phonebook.
Scroll UP or DOWN until you see the contact you want to edit.
Then press the MENU/OK/MUTE button and a flashing bar will appear at the
end of the name.
Use the keypad to enter characters or DELETE button to delete.
To delete all contacts in your phonebook
To edit a contact in your phonebook
Press the MENU/OK/MUTE button to confirm, and the display will move the
flashing bar to the end of the number position.
Use the keypad to enter digits or the DELETE button to delete.
Press the MENU/OK/MUTE button. The display will show the first name and
number in your phonebook.
Use the UP or DOWN buttons to scroll through the list until you see the contact
you want to delete.
Press the MENU/OK/MUTE button and the display will show “CONFIRM?”.
Press the MENU/OK/MUTE button to confirm if you really want to delete this
entry, or press the PHONEBOOK/CANCEL to save the contact.
In either case, the display will return to the previous menu option.
or
or

BinatoneHelpLine : 0845 345 9677 15
The display will move the flashing bar to the end of the number position.
If the number needs modifying use the keypad to enter digits or
the DELETE button to delete.
Use the UP or DOWN buttons to scroll through the melodies.
Press the MENU/OK/MUTE button to confirm your selection.
You will hear a confirmation tone, and the display will return to
the last number redial list.
Press the MENU/OK/MUTE button to confirm the number, and
the display will show "MELODY 1".
Once you have finished press MENU/OK/MUTE button to confirm and the
display will show “MELODY 1”.
Scroll UP or DOWN to select a melody.
Then press the MENU/OK/MUTE button to confirm, and the
display will go back to the previous menu.
Press theREDIAL/PAUSE button to review the last number redial list.
Scroll UP or DOWN to find the number you want to store.
Press the MENU/OK/MUTE button. Then the display will show “ADD TO PB?”.
Press the MENU/OK/MUTE button to confirm, and the display will show a flashing
Key in the name for this redial number into the phonebook.
Press the MENU/OK/MUTE button to confirm the name.
To store a last number redial in your phonebook
or
bar at the beginning of the name position.
or
RD /P
or

BinatoneHelpLine : 0845 345 9677 16
Either press the PHONEBOOK/CANCEL button once, or the MENU/OK/MUTE
button three times, and you will see the 1st number and name in the phonebook.
Scroll UP or DOWN button to select the name and number of the person
you want to call.
Then pick up the handset or press the SPEAKERPHONE button to make the call.
This allows you to review how many records in the phonebook are occupied. The
phonebook allows up to 150 names and numbers.
Press the MENU/OK/MUTE button, to see “PHONE BOOK”.
Press the MENU/OK/MUTE button, and then press the UP or DOWN
buttons until you see "MEM STATUS".
Press the MENU/OK/MUTE. Then the display will show the phonebook
memory space available e.g. if you have saved 30 names and numbers in
your phonebook, it would display 30/150.
Press the PHONE BOOK/BACK until you return to idle mode.
There are two Direct Memory buttons M1 and M2on the corded base.
In idle mode, enter the telephone number you want to store.
Press and hold M1 or M2 key for more than 2 seconds, until you hear the
confirmation tone to indicate the number has been stored.
In idle mode, briefly press M1 or M2
key, and the unit will automatically dial
out the telephone number in speakerphone mode.
Making calls from the phonebook
Reviewing phonebook memory status
Direct Memory Call
To Store the telephone number
To Speed-Dial the telephone number
Note: For a short-cut to finding the name, you can press the digit buttons to go
directly to the first entry beginning with the corresponding letters of that key,
and then scroll from there.
or
or
or

BinatoneHelpLine : 0845 345 9677 17
To subscribe to this feature, you need to contact your service provider, and there may be
a charge for this service. Caller Display lets you see the phone numbers of your callers on
the display, before you answer.
The base and each handset will store its own CID list independently. Both answered and
unanswered calls are stored, up to a maximum of 20 calls. When the caller display list is
full, any new caller display entry will replace the oldest record.
If you receive a new call, the display will show the icon with the name and number
of the caller.
If there are no items on the CID list, the display will show NO CALLS.
The display may also show the following:
UNAVAILABLE – if the number of the caller is unavailable, e.g. from an international call.
WITHHELD – if the call is from someone who has withheld their number, e.g. by dialling 141.
Press the MENU/OK/MUTE button, to see PHONEBOOK
Press the DOWN button, to see "CALL LOG".
Press the MENU/OK/MUTE button, to see “RECEIVED”.
Press the MENU/OK/MUTE button, to see the most recent record in the CID list.
Press the UP or DOWN buttons to scroll through the CID list.
*If you wish to call directly from the CID list, press the SPEAKERPHONE button or lift up
the handset to dial the number automatically.
or
New CID log
To review the CID list
Caller Display (CDS) / Caller ID (CID)
The icon will be displayed in the idle screen until all new calls
have been viewed in the CID list.
Note: To go directly to the first record of the CID list, press the UP or DOWN
buttons in standby mode.
The caller display information includes:
- the caller's number (up to 20 digits)
- the date and time of the call
- the caller's name (up to 12 characters) if the incoming number matches an entry
Note: it will also display the caller's name if the network sends it, but this is not normally
in the Phonebook
available in the UK.

BinatoneHelpLine : 0845 345 9677 18
Enter name using keypad.
Press MENU/OK/MUTE button to confirm the name.
Use the UP or DOWN buttons to scroll through the melodies.
Press the MENU/OK/MUTE button to confirm your selection.
You will hear a confirmation tone, and the display will return to the CID list.
Repeat the steps above to review the CID list, and to locate the record you
want to store in the phonebook.
Press MENU/OK/MUTE button to see “ADD TO PB ?”.
Press MENU/OK/MUTE button to confirm, and the display will show a
To store a Caller ID contact in the phonebook
To delete all Caller ID records
Repeat the steps above to review the CID list.
Press the MENU/OK/MUTEbutton, to see ADD to PB?
Press the DOWN button twice to see DELETE ALL?
Press MENU/OK/MUTE button twice, you will hear the completion tone
and the display will show EMPTY .
flashing bar at the beginning of the name position.
The display will move the flashing bar to the end of the number position.
If the number needs modifying use the keypad to enter digits or
the DELETE button to delete.
Press the MENU/OK/MUTE button to confirm the number, and the
display will show "MELODY 1".
Repeat the steps above to review the CID list, and to locate the record you want to delete.
To delete a Caller ID record
Press the MENU/OK/MUTEbutton,to see ADD to PB?
Press the DOWN button, to see DELETE?
Press the MENU/OK/MUTE button twice, you will hear the completion tone
and the display will return to the Caller ID list.
or