Bio-Therapeutic bt-accent AIR User manual

bt-accent®AIR quick start guide
1. Read operation manual prior to using the equipment.
2. Do not use the unit if any contraindications are present.
3. Attach accessory holster to
back of unit. Secure with
four screws and allen wrench
provided.
5. Attach AIRbrush tube into
WAND connection on top of
unit and place in holster.
4. Attach Handpiece tube into
JET connection on top of unit
and place Handpiece in holster.
Skin Care for life inside and out
®
6. Attach Dome Tube onto Dome
Tube Connector located on
front of machine above Flow
Meter.

Press POWER SWITCH at rear
of unit to “On”.
7. Attach the other end of Dome
Tube to Dome.
To wall
9. Press Power button at top of
unit near handle.
10. DOME
Select DOME to activate AIR.
8. Attach POWER CORD to
unit, plug into standard wall
outlet appropriate for the unit.

11. Adjust ow meter to desired
level.
12. AIRbrush
Fill cup half full with
RESTYFLUID, or other
appropriate bt-ceuticals®
product.
13. Select WAND
Press trigger to start spray.
When empty, allow AIR to
ow through AIRbrush for
one minute. Follow cleaning
instructions found in the
Operation Manual.
14. Handpiece
Select Handpiece Tip.

SA-910 REV062718
15. Select JET.
16. Turn off by pressing selected accessory button again.
Press power switch at the rear of the unit to “Off.”
bio-therapeutic.com