Bio-Therapeutic bt-vision User manual

bt-vision®quick start guide
1. Read manual prior to using
the equipment.
3. Choose and install preferred
lenses by gently pushing each
lens into insertion clasps
under visor.
a. Lenses should be
inserted with at side
towards eyes.
b. Installing two lenses allow
increased magnication
when using both.
2. Insert 3 AAA batteries in
battery compartment under
visor.
4. Place visor on head with
band running horizontally
across forehead just above
brows.
Skin Care for life inside and out
®

SA-V REV052218
5. Hold visor in place and tighten
band by pressing the gray tab
and pulling the tail until t is
snug but not tight.
6. To adjust visor, loosen screws on
both sides of bt-vision®, move
visor, then tighten screws.
7. Turn the light on by moving
the light switch forward.
The LIGHT SWITCH is on the
top left side of visor.
8. Adjust light intensity by
moving the SMALL SWITCH
directly on light.
bio-therapeutic.com