Bio-Therapeutic Bio-Synthesis User manual

Bio-Synthesis®quick start guide
1. Read operation manual prior to using the equipment.
2. Do not use the unit if any contraindications are present.
3. Place on a sturdy, even surface appropriate for weight of unit.
4. Plug cord from arm into the
corresponding receptacle in
mounting post.
6. Plug POWER CORD into
base and into standard wall
outlet appropriate for the unit.
7. Click SWITCH at rear of unit to
ON position.
To wall
5. Mount arm into the mounting
post and hand tighten SCREW
at base of post.
Skin Care for life inside and out
®

SA-50 REV052218
9. Apply eye protection for client
(eye pads and goggles) and
unit operator (goggles).
10. After service, click switch at rear of unit to OFF position.
8. Touch screen on front of unit
to access menu.
bio-therapeutic.com