
CHARGING THE UNIT
Pull back charging port cover and
plug round end of charging cord
into the back of the unit. You will
feel the magnet engage when
cord is secure. Plug the charging
cord into AC adapter. Plug AC
adapter into standard wall outlet.
The LED lights cycle on and off
from left to right while the unit is
charging. All 3 LED’s will turn on
solid when charging is complete.
pull back
Read operation manual prior to using the equipment.
Do not use the unit if any contraindications are present.
2. Press MODE to select mode,
EXFOL is active by default.
3. Press +/- to start mode in LOW.
Press +/- to cycle between
HIGH and LOW.
1. Turn the unit on or off by
pressing and holding the
Power Button until the unit
powers on or off.
NOTE: To conserve battery power the unit is
designed with an auto shut off feature. If the
unit turns off during a service simply turn it
back on and resume your service.