BioEnergiser BioFeedBac User manual

HOW TO FIT
AND WEAR YO R
CORRECTLY
General questions and answers
about your Biofeedbac Support Belt
Q. How long can I wear the Biofeedbac
Support Belt for?
A. You can wear it as long you feel you
need to support your back. We
suggest that you first wear the belt
initially for 30 minutes to get used to
wearing the Biofeedbac Support
Belt. Then, wear the belt as often as
you require.
Q. Can I wear the Biofeedbac Support
Belt whilst sleeping?
A. Yes, the Biofeedbac Support Belt has
been designed to be comfortable and
can be worn whilst sleeping or during
activities.
Q. How do I clean my Biofeedbac
Support Belt?
A. We suggest you to use a damp cloth
and wipe clean as necessary
Q. Can I wear the Biofeedbac Support
Belt under my clothes?
A. Yes. the Biofeedbac Support Belt is
designed to be discreet so you can
wear it under your clothing.
Q. Can I also wear on top of my clothing?
A. Yes, as long as the clothing is thin
such as T-shirt or undergarment.
Safety information
i. Keep away from heat
ii. Do not expose to chemicals
iii. Keep away from naked flames
iv. Do not expose to humidity
v. When not in use, store in a cool,
dry area
vi. If wearing the belt causes irritation,
simply remove and try again 24 hours
later but tighten the belt so it’s
comfortable around your waist
vii. Not suitable for children under
12 years old
viii.Do not wear for excessive long
periods of time; remember to take the
belt off after wearing it for a few hours
ix. If you are in any doubt about the
severity of your injury or the best way
to treat it, you should seek
professional medical advice
Care instructions
Clean with damp cloth. Do not machine
wash or immerse in water.
Composition of materials
Polyester, Elastic Polyester, 600D
Polyester, EVA.
Designed and developed in the UK
by Bioenergiser Ltd. ©
Made in People’s Republic of China (PRC).
Designed in the UK

1. Remove or hitch-up your top clothing
so you expose your lower back and
tummy.
2. You do not need to remove your
trousers/skirt; keep these on while
fitting the Biofeedbac Support Belt.
3. Place the Biofeedbac Support Belt
around your lower back (A), ensuring
that the biofeedbac pads are on the
inside on the belt so they are touching
your back (C). Please note that the
Lumbros logo should be facing the
right way when you fasten the belt.
4. Position the belt so the centre panel is
aligned correctly with your spinal
column (B) – the protective centre
piece should be placed against the
spinal cord so the biofeedbac pads are
on either side of the spine.
5. Close the Biofeedbac Support Belt
using the velcro tabs. Ensure that it is a
snug fit but remains comfortable. Do
not over tighten the belt as this may
cause discomfort. Ensure the
Biofeedbac logos are facing
your back the correct way round (D).
How to fit and wear your Biofeedbac Support Belt correctly
Important note
If you are in any doubt about the severity of your in ury or the best way to treat it,
you should seek professional medical advice.
(A): Wrap the inside of the
belt to your lower back
(B): This should aligned
on your spinal column.
(D): Ensure the Biofeedbac logos are
facing your back the correct way round
(C): The Biofeedbac sensory pads should be touching
your back muscles - either side of your spinal column.