Bircher Reglomat D3-P K1 User manual

1
D3-P K1
Mounting instructions
1Delivered D3-PK1 switch
2Remove the cover
3Removing the D3-P K1 switch
4Positioning of the housing – template for drill holes
5Insert the D3-P K1 switch
6Replace the cover
TROUBLESHOOTING
ENGLISH
346906A
08/15
The hose is mounted in the case without any extreme bending.
When inserting the switch
avoid kinks in the hose.
Correct device assembly and
proper hose position.
Error situation:
The hose has a kink,
functionality cannot be
guaranteed.
Corrective action:
Make sure the hose is
inserted all the way to the
ledge of the connecting piece.
Then slightly rotate the hose
on the switch connecting
piece left or right and insert
the switch - repeat hose
rotation / switch insertion
until the hose position looks
like in picture 5.
For the positioning of the mounting
holes use the housing or the drilling
template on page 2.
Once the holes are drilled the
housing can be xed with screws.
This manual explains how the D3-P K1 switch is mounted to a wall or door.
At the end of this manual, a template for the correct drilling position is available.
Leave the hose connected to the
switch while marking the hole
positions or attaching the housing.
This ensures proper hose position as
in picture 5 upon re-inserting the
switch.
35
60
76
55
5

2
Drilling Template
Contact
Bircher Reglomat AG
Wiesengasse 20
CH-8222 Beringen
www.bircher-reglomat.com
35
60
76
55
5
Danish seller
Swissdoor ApS
Stenhuggervej 2
DK-5471 Soendersoe
Denmark
[phone]
[email protected]
www.swissdoor.dk