birddog STRP12050A-WIFIRT User manual

WiFi Converter 09.288WN.04158
Wiring diagram
12V DC power input
Method 1:Connect your cell phone with your home net router(WiFi-RF)
Function introduction
Important: Read All I nstru ction s Prior t o Insta llation
Output RF signal
Operation Frequency 2.4G
Operating temperature 0-40°C
Relative humidity 8% to 80%
Dimensions 110x85x24.2mm
• The convertor works with RF receiver series to be controlled by IOS or Android system via WIFI.
• Waterproof grade: IP20
Product Data
• DO NOT install with power applied to device.
• DO NOT expose the device to moisture.
Safety & Warnings
Power Supply 12VDC
Green LED indicator:
Power normal
Red LED indicator:
Under control
Blue LED indicator:
WiFi connected
Ethernet
12V DC power
input
Router
Learn ing Key
RF LE D Recei ver
Method 2:Connect your cell phone with the converter(WiFi -RF)
12V DC power
input
Learn ing Key
RF LE D Recei ver
Learn ing Key
RF LE D Recei ver
Reset
Switch
41 mm
WiFi Reset switch: press and
hold down for 10S then release,
the blue WiFi indicator will go
off and go on again, WiFi setting
will be factory reset.
Note: When the hub
is configured to home router,
use the button to reset WiFi
setting to enable to control
directly through the hub
network again.

Operation
1. This WiFi-RF converter can be controlled by both “Easylighting” and
“Easyhome” apps, please choose either of them to control.
2.For “Easylighting” app, download application from ‘app store’ or
‘google play’ by searching ‘easylighting’ or scanning following QR codes.
3. For “Easyhome” app, download application from ‘app store’ or
‘google play’ by searching ‘Easy Home - Smart Home’.
4.If the converter has connected with router, then connect your cell phone
to your router network.If the converter did not connect with router, then
connect your cell phone to the converter network directly. (Password:0123456789)
5. Open the easylighting/easyhome application and operate according the application manual.
Andriod IOS