Bison BA31U User manual

1
Item Qty Description Item Qty Description
A 1 Rim Assembly F 6 3/8” Lock Washers
B 1 Support Angle G 6 3/8” Flat Washers
C 4 3/8” x 1” Carriage Bolts H 1 7/16” x 1-1/2” Hex Bolt
D 2 3/8” x 2-1/2” Carriage Bolts I 1 7/16” Flat Washers
E 6 3/8” Hex Nuts J I 7/16” Lock Washer
P A R T S L I S T
1 ea. 9/16” combination wrench 1 ea. 5/8” socket wrench
1 ea. Level
TOOLS/MATERIALS REQUIRED
♦ Inspect all contents prior to installation. Report any missing parts to dealer immediately.
♦ Read all instructions before proceeding.
Date: 3.11.99 Rev: 5 B.A. N.J.C. File: server/pub/instr/ba31u.mps Ref#: 900070
—— Instruction Manual ——
BA31U
Rear Mount Goal Customer Service
[phone]
1. Using two 3/8” x 1” carriage bolts
(C), 3/8” flat washers (G), 3/8” lock
washers (F) and 3/8” hex nuts (E),
mount the rim assembly (A) to the
back of the backboard, using the top
two holes on the backplate only.
2. Push rim assembly upward, tight
against the backboard, and tighten the
top two bolts making sure that the rim
is level. (See Fig. 1)
Figure 1

2
3. Install the 7/16” x 1/2” hex bolt (H), 7/16” flat washer
(I) and 7/16” lock washer (J) into the bottom of
backboard if applicable. (See Fig. 2)
4. Mount support angle (B) loosely to the rim
assembly, using two each 3/8” x 1” carriage
bolts (C), 3/8” flat washers (G), 3/8” lock
washers (F) and 3/8” hex nuts (E). Boltheads
must be on top of rim assembly. Push angle
tightly against face of bacboard and tighten
bolts. (See Fig. 3)
5. Install two 3/8” x 2-1/2” carriage bolts (D)
from the front of the backboard and tighten
with 3/8” flat washers (G), 3/8” lock washers
(F) and 3/8” hex nuts (E). (See Fig. 4)
6. Be sure the rim is level and all bolts are tight.
Attaching Nylon Net to No-Fail Netlock Systems
1. To install net, slip twisted loop thru no fail
netlock cutout from the inside of the rim
outward.
2. Wrap twisted loop around bottom of no-fail
netlock band and back throught the cutout a
second time.
3. Slip open end of loop over the “T” shaped
hook
4. Pull net tight to assure that it hangs correctly.
Warning!!!
Failure to attach the net correctly increases
the likelyhood of failure of net attachment
during play.
Figure 2
Figure 3
Figure 4