bitmore AURAL PRO TWS User manual

AURAL PRO TWS
USER GUIDE
1
0
0
%
R
E
C
Y
C
L
E
D
P
L
A
S
T
I
C

BM-ECBTOE E-PULSE PRO | 1
EPULSE PRO HEADPHONES
IMPORTANT:
BEFORE FIRST USE, PLEASE READ THIS MANUAL IN FULL AND KEEP IT SAFE.
DO NOT EXPOSE THESE HEADPHONES TO LIQUIDS OR HIGH HEAT.
YOUR BITMORE® E-PULSE PRO HEADPHONES:
A: Increase Volume / Previous
B: Play / Pause
C: Decrease Volume / Next
D: 3.5mm AUX Input
E: Type C Charging Port
F: LED Indication
G: Power On / Off
A
B
C
G
F
E
D

BM-ECBTOE E-PULSE PRO | 2
SLIDE TO TURN ON OR OFF
PRESS ONCE TO PLAY THE PREVIOUS TRACK. HOLD TO INCREASE THE VOLUME
PRESS ONCE TO PLAY THE NEXT TRACK. HOLD TO DECREASE THE VOLUME
PLAY/PAUSE, ANSWER/REJECT AN INCOMING CALL, DIAL LAST NUMBER
Play or Pause: Press once to play, press again to pause
Answer/Reject a call : When ringing, press once to answer a call, press it again to end the call.
To reject a call, press and hold for 3-5 seconds
Redial last number: Double click
CHARGING THE E-PULSE PRO:
1. Insert the Type C end of the supplied cable (or use your own quality name brand cable that
you might get from your phone manufacturer) into the Type C port on the headphones.
2. Connect the other end to a USB port, or a USB mains adaptor (not included) which will provide
a faster charge than a USB port. A red LED indicates the headphones are charging,
when the LED switches off, the headphones are fully charged (approx. 2-3 hours).
Note: An alert tone every 30 seconds indicates a low battery.
Important: To prolong battery life, ensure you turn off the e-Pulse Pro when you are
not using them. If you are not going to use your headphones for a long period of time,
please ensure you charge them a minimum of every 2 months.
Failure to do so will void the guarantee.
THE BUTTONS

BM-ECBTOE E-PULSE PRO | 3
CONNECTING TO BLUETOOTH
Note: Before first pairing, please ensure that the e-Pulse Pro are fully charged.
1. Turn on the headphones, an alternate flashing blue and red LED indicates the headphones
are in pairing mode
2. Turn on your device Bluetooth and ensure the headphones are no more than 1m apart
3. Select Bitmore ePulse from your device’ Bluetooth list. A flashing blue LED indicates
your headphones are paired
Note: If you have paired your e-Pulse Pro to more than one Bluetooth device and have both in range
and switched on, you may experience connection issues. Ensure you turn off the Bluetooth from the
undesired device to stop this from happening.
USING THE 3.5MM AUX
If you want to go old school and have a wired audio experience, you can!
1. Turn off the headphones
2. Connect the supplied 3.5mm AUX cable to your headphones and the other
end to your audio source
CARING FOR YOUR EPULSE PRO
1. Avoid liquids and humidity
2. Do not use abrasive materials or chemicals to clean the headphones (use a slightly damp cloth and
dry immediately (avoid the charging or AUX ports and the buttons, as well as the internal circuitry)
3. Avoid extremely high or low temperatures (this will ruin the battery life)
4. Do not expose to flames, impacts, heights, or sharp objects

BM-ECBTOE E-PULSE PRO | 4
TROUBLESHOOTING
My device cannot find the e-Pulse Pro:
1. Ensure your headphones are fully charged. Switch them off for 2 mins and turn off
your device Bluetooth.
2 Switch the headphones on, turn on your device’ Bluetooth and search again
I am having audio/connection issues:
1. Make sure your headphones are not more than 10m away from your device and that the distance
between them isn’t obstructed i.e., too many walls as this can interfere with signal strength.
2. Make sure your headphones are fully charge
Still having issues?
Drop us an email on [e-mail] or speak to our team on [phone]
Frequency Range 20Hz – 20KHz]
Charging Type Type C
Driver 40mm
Weight c. 218g
Input Voltage DC 5V
SPECIFICATION:
Bluetooth V 5.0
Channels Stereo
Impedance 32Ω
Battery 250mAh Li-Polymer
Sensitivity 95 +/- 3dB
Battery Life 10+ hours (70% vol)
Environmental Protection: Waste electrical products should not be dispose of with household
waste. Please contact your local refuse centre for recycling guidance. Did you know? Bitmore®
is part of the WEEE Waste Electrical and Electronic Equipment recycling? We’re doing as much
as we can to reduce waste, and so can you! That’s why we used 100% recycled plastic to make
the housing of the e-Pulse Pro.
Made in China

SAFETY INFORMATION:
DO NOT place any metals or mental objects (including a device case/cover that has metal
components) on your device or this product whilst in use and connected to a power source. You
risk potential electrical shocks, static or other more dangerous incidents such as fire or death
DO NOT leave your device connected to this product when not in use or when charging
is complete
DO NOT cover this product or your device when in use
DO NOT expose this product to heat sources (including fire or direct sunlight)
DO NOT use or expose this product or your device to areas of high humidity, any liquids, gels or
aerosols or heavy dust, keep it dry and clean If this product encounters any liquid, immediately
unplug the product from any connected power sources or devices
DO NOT disassemble or modify this product – this could cause risk of injury, death,
or damage to property
This product must only be used and stored in an ambient environment with a temperature
between 0-45 °C
Avoid dropping this product (or any other heavy impact which might damage the internal circuit)
Avoid cleaning this product using liquids or chemical substances (use a dry cloth only)
Only use attachments/accessories supplied by Bitmore or those certified by your
device manufacturer
This product is not a toy, DO NOT leave children unsupervised with this product.
Please use a genuine certified wall adaptor, such as one that is supplied with your
device manufacturer
DO NOT use a wall adaptor with a fast charge or high AMP output
DO NOT leave your device unattended for charging overnight
DO NOT use faulty, damaged or none certified (by your device manufacturer) plugs to charge
or discharge your devices
DO NOT use a plug with more than a 5W output
DO NOT operate this product where aerosols are or have recently been used or where oxygen is
being administered
DO NOT operate in a closed environment such as a pocket, handbag, backpack, under
a pillow etc
BM-ECBTOE E-PULSE PRO | 5

Get your 24-month Limited Guarantee and become a Bitmore member!
You must register your device via bitmore.co.uk within 30 days of purchase for the manufactur-
ing guarantee to be valid.
Plus get a “bit more” by gaining access to exclusive product giveaways, membership rewards and
discounts!
Subject to applicable law, parent company Bitmore Limited (UK) and Nuwave Channel Partners
BV (operating in the EU on behalf of Bitmore Limited) (hereinafter “Bitmore”4), sell its
products (hereinafter “Product(s)”) with the intent that they are free of defects in manufacture
and workmanship for 24-months from the date of original purchase, except as noted below.
Bitmore warrants that its Products will be free of defects in material and workmanship under
normal use and service. This guarantee extends only to consumers and does not extend to
Retailers. Bitmore does not authorize anyone, including, but not limited to, retailers, the
subsequent consumer purchaser of the product from a retailer or remote purchasers, to obligate
Bitmore in any way beyond the terms set forth herein. This guarantee does not cover damage
caused by misuse or abuse; accident; the attachment of any unauthorized accessory; alteration
to the product; improper installation; unauthorized repairs or modifications; improper use of
electrical/power supply; loss of power; dropped Product; malfunction or damage of an operating
part from failure to provide manufacturer’s recommended maintenance; transportation damage;
theft; neglect; vandalism; or environmental conditions; loss of use; or any other conditions
whatsoever that are beyond the control of Bitmore.
THE GUARANTEE PROVIDED HEREIN SHALL BE THE SOLE AND EXCLUSIVE GUARANTEE.
THERE SHALL BE NO OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING ANY
IMPLIED GUARANTEE OF MERCHANTABILITY OR FITNESS OR ANY OTHER OBLIGATION
ON THE PART OF THE COMPANY WITH RESPECT TO PRODUCTS COVERED BY THIS
GUARANTEE. BITMORE SHALL HAVE NO LIABILITY FOR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES. IN NO EVENT SHALL THIS GUARANTEE
REQUIRE MORE THAN THE REPLACEMENT OF ANY PART OR PARTS WHICH ARE FOUND
TO BE DEFECTIVE WITHIN THE EFFECTIVE PERIOD OF THE GUARANTEE. REFUNDS WILL
BE GIVEN IF REPLACEMENT PARTS FOR DEFECTIVE MATERIALS ARE NOT AVAILABLE,
BITMORE RESERVES THE RIGHT TO MAKE PRODUCT SUBSTITUTIONS IN LIEU OF REPAIR
OR REPLACEMENT.
BM-ECBTOE E-PULSE PRO | 6

This guarantee does not extend to the purchase of opened, used, repaired, repackaged and/or
resealed products, including but not limited to sale of such products on Internet auction sites
and/or sales of such Products by surplus or bulk resellers. All warranties or guarantees shall
immediately cease and terminate as to any Products or parts thereof which are repaired,
replaced, altered, or modified, without the prior express and written consent of Bitmore.
This Agreement is made for the benefit of the parties and is not intended to benefit any third
party or be enforceable by any third party. The rights of the parties to terminate, rescind, or
agree any amendment, waiver, variation, or settlement under or relating to this Agreement are
not subject to the consent of any third party.
This guarantee provides you with specific legal rights. You may have additional rights which may
vary from country to country. Because of individual regulations, some of the above limitations
and exclusions may not apply to you.
NOTE:
Failure to follow the instructions in this manual will result in the manufacturing guarantee being
void. Please take extra care when connecting cables to your devices or the product to avoid
damaging the ports.
Wear and tear aren’t covered by the guarantee. Submersion in liquids will void the guarantee.
Devices connected to this product or App are not covered by the Bitmore guarantee.
For Bitmore products containing a Lithium-ion battery:
Lithium-ion battery powered devices are dispatched from our factory with a partial charge,
depending on the storing temperature and the length of storage during transit and with the
retailer, the charge held by the device will naturally decrease, for best performance we recom-
mend charging the device fully,
Any product that is powered by a Lithium-ion battery, as with all devices using Lithium, the
amount of charge the lithium cells can hold decreases over time and with use or if left in a cold
environment, experiencing fluctuations in temperature or when unused for long periods of time
(charge and discharged the battery often, even if you are not using it). Therefore, you may find
that the amount of charge this product holds and oers may be slightly less. This is typically a
slow process and a naturally recurring phenomenon and is not covered by the guarantee
or guarantee.
BM-ECBTOE E-PULSE PRO | 7

Our roots are in creating high quality
products, which has now grown in to
developing an extensive range of
audio, power and tech accessories.
Stemming from our passion for the
environment, we strive to make
Bitmore as eco-friendly as possible.
The combination of innovative
sustainable solutions with our tech
expertise means we create products
that are great for you, and the planet.
@bitmoreuk
www.bitmore.co.uk
[email protected]
A BIT MORE
ABOUT US
IMPORTED AND DISTRIBUTED BY:
BITMORE LTD, PARK HOUSE,
15-19 GREENHILL CRESCENT,
WATFORD, WD18 8PH, UK
BITMORE BV,
KAPELLERLAAN 19,
6041 JB ROERMOND, NL