BIXOLON SRP-350 PlusA User manual

User’s Manual
SRP-350/352V
THERMAL PRINTER
Ver. 1.00
http://www.bixolon.co.kr

Ver. 1.00
- 2 -
SRP-350/352V
Table of Contents
Copyright .............................................................................................................................3
WARNING & CAUTION........................................................................................................7
Manual Introduction..........................................................................................................9
Printer Introduction.........................................................................................................10
1. Content Confirmation ..................................................................................................12
2. Product Part Names .....................................................................................................13
2-1 Printer Part Names......................................................................................................... 13
2-2 Interface Part Names ..................................................................................................... 14
2-2-1 USB Interface (Built-in)...................................................................................... 14
2-2-2 Ethernet Interface.............................................................................................. 15
2-2-3 Serial Interface Card (RS-232C)......................................................................... 17
2-2-4 Parallel Interface Card (IEEE1284).................................................................... 19
2-2-5 Drawer Kick-out Port ......................................................................................... 21
3. Installation & Usage.....................................................................................................22
3-1 Printer Installation Placings .......................................................................................... 22
3-2 Power Connection .......................................................................................................... 23
3-3 Inserting and changing the paper roll ......................................................................... 25
3-4 Using Controller.............................................................................................................. 28
3-5 2-inch Mounting Partition.............................................................................................. 29
4. Printer Setting Change ................................................................................................30
5. Self-Test .........................................................................................................................33
6. Hexadecimal Dumping.................................................................................................36
7. Maintenance..................................................................................................................37
7-1 Paper Jam......................................................................................................................... 37
7-2 Cleaning Printer.............................................................................................................. 38
8. Specifications ................................................................................................................39
8-1 Printer Specifications...................................................................................................... 39
8-2 Recommended Papers................................................................................................... 40

Ver. 1.00
- 3 -
SRP-350/352V
Copyright
© BIXOLON Co., Ltd. All rights reserved.
This user manual and all property of the product are protected under copyright law.
It is strictly prohibited to copy, store, and transmit the whole or any part of the manual
and any property of the product without the prior written approval of BIXOLON Co., Ltd.
The information contained herein is designed only for use with this BIXOLON product.
BIXOLON is not responsible for any direct or indirect damages, arising from or related to
use of this information.
• The BIXOLON logo is the registered trademark of BIXOLON Co., Ltd.
•All other brand or product names are trademarks of their respective companies or
organizations.
BIXOLON maintains ongoing efforts to enhance and upgrade the functions and quality
of all our products.
In the following, product specifications and/or user manual content may be changed
without prior notice.
Caution
Electronics, such as printers, are prone to damage by static electricity. Therefore, to
protect the printer from static electricity, be sure to turn off the printer before
connecting or disconnecting the cable to the rear of the printer. If the printer is
damaged by static electricity, contact your local dealer.
This euipmeqnt is not suitable for use in locations where children are likely to be present.
When the printer is operating with the media cover open, do not wear anything that can
touch the drive, such as clothing, necklaces, rings, watches, or employee certificates
close to it. Also, keep yourself away from the printer as it is dangerous for some parts of
the body to come into contact with it. If an object or part of your body touches the drive,
immediately disconnect the power cord or turn off the power switch on the back of the
product.

Ver. 1.00
- 4 -
SRP-350/352V
Warning
Hazardous moving parts
Keep fingers and other body parts away
Pull the print head lever can be stop all moving parts.
IEC 60417-6057 (2011-05) for other moving parts.
Mise en garde
Les appareils électroniques, tels que les imprimantes, risquent d'être endommagés par
l'électricité statique. Par conséquent, pour protéger l’imprimante de l’électricité statique,
veillez à l’éteindre avant de connecter ou de déconnecter le câble situé à l’arrière de
celle-ci. Si l'imprimante est endommagée par l'électricité statique, contactez votre
revendeur local
Cet appareil n’est pas adapté d’utilser dans des endroits où des enfants sont
probablement d'être présents.
Lorsque l'imprimante fonctionne avec le capot ouvert, ne portez rien qui puisse entrer
en contact avec le mécanisme, tel que des vêtements, des colliers, des bagues, des
montres ou des certificats d'employé à proximité. Éloignez-vous également de
l’imprimante car il est dangereux que certaines parties du corps entrent en contact avec
celle-ci. Si un objet ou une partie de votre corps entre en contact avec le mécanisme,
débranchez immédiatement le câble d'alimentation ou éteignez l’interrupteur situé à
l'arrière du produit.
Attention
Pièces mobiles dangereuses
Veillez à ce que vos doigts ou toute partie du corps n’entre(nt) pas en contact avec ces
pièces. Tirez le levier de la tête d'impression pour arrêter toutes les pièces en movement.
IEC 60417-6057 (2011-05) pour les autres pièces mobiles.

Ver. 1.00
- 5 -
SRP-350/352V
Compliance information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class A digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Caution: Exposure to Radio Frequency Radiation.
To comply with FCC RF exposure compliance requirements, a separation distance of at
least 20 cm must be maintained between the antenna of this device and all persons.
Caution: Any Changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate the equipment.
Class A Digital Device : Wired Device
This Apparatus complies with class “A” limits for radio interference as specified in the
Canadian department of communications radio interference regulations.
This Class A digital apparatus complies with Canadian ICES-003.
Appareil numérique de classe A: appareil filaire
Get appareil est conforme aux normes class “A” d’interference radio tel que specifier
par ministre canadien des communications dans les reglements d’interference radio.
Cet appareil numérique de la classe A est conform à la norme NMB-003 du Canada.

Ver. 1.00
- 6 -
SRP-350/352V
Waste Electrical and Electric Equipment (WEEE)
This marking shown on the product or its literature, indicates that is should
not be disposed with other household wastes at the end of its working life, To
prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from other types of wastes
and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product,
or their local government office, for details of where and how they can take this item for
environmentally safe recycling. Business users should contact their supplier and check
the terms and conditions of the purchase contract. This product should not be mixed
with other commercial wastes for disposal.

Ver. 1.00
- 7 -
SRP-350/352V
WARNING & CAUTION
Is described as death, physical injuries, serious financial losses, and
damage to data etc. that can be caused to the user.
Do not connect multiple products to a
single or faulty power outlet. Use only
grounded power outlets that meet the
industry standard. Noncompliance may
cause electric shock or fire.
Only use authentic products from
BIXOLON. The company will not provide
post-sale support for damaged or other
quality issues that any fake
(or refurbished) products may incur.
Do not excessively bend or strain the power cord.
Securely push the power cord all the way into the
power outlet lest it remain loose. Make sure to
hold the cord tight when separating it from the
power outlet. Do not remove the power cord
while the product is in use. Noncompliance may
cause electric shock or fire.
Keep small accessories or other packaging
materials away from young children.
Beware: choking hazard. Mishandling the
product may incur injuries which may
require seeking urgent medical
attention.
Keep excessive liquids away from the
power cord and outlet. If matter is
smeared onto the power cords, wipe with a
dry cloth.
Noncompliance may cause electric
shock or fire.
Do not allow the product to be
damaged by heavy objects.
Noncompliance may cause electric
shock or fire.

Ver. 1.00
- 8 -
SRP-350/352V
If the product emits a strange sound, burning
smell, or smoke, turn off the power immediately
and unplug the power cord. If the product is
dropped or its exterior is damaged, turn off the
power immediately and unplug the power cord.
Do not subject the product to shock. It may
start a fire. It may damage the product.
Install the product in a well-ventilated area by keeping it
a certain distance from the wall. The product installed in
certain places such as where a lot of fine dust is generated,
where the temperature is too high or too low, where there is
a lot of moisture or water, and at airports or stations that are
used continuously for a long time may suffer serious quality
problems due to the influence of the surrounding
environment. An increase in internal temperature
may start a fire. Be sure to contact the place of purchase
before installing the product.
Install the product in a fixed place
preventing it from tipping over. When
moving the product, turn off the power and
disconnect all connected cables, including
the power cord. It may damage the
product.
Never independently disassemble,
repair, or modify the product as the
warranty will become invalid.
When repair is necessary, contact
the original place of purchase.
Do not let any foreign substances
enter the product. Do not place heavy
objects, liquids, or metals on the
product. This could cause damage to
the product or a fire.
If there is a problem with the
product, please contact the original
place of purchase or through
BIXOLON website’s product repair
page (http://www.bixolon.com).

Ver. 1.00
- 9 -
SRP-350/352V
Manual Introduction
This manual provides basic information on printers and provides ways to install, use,
and check them. In order to protect the safety of users and prevent property damage,
be fully familiar with this manual before using the product. Please use it.
Manual Symbol Introduction
Precaution
& Warning
It describes death, physical injuries, serious financial losses,
and damage to data etc. that can be caused to the user.
Note
It provides additional information on the function and
performance of the product.

Ver. 1.00
- 10 -
SRP-350/352V
Printer Introduction
SRP-350/352V printers have been designed to be connected to various types of
electronic devices such as POS (Point Of Sales), and computer peripheral devices.
The main features of the printer are as follows
1. THERMAL PRINTER
2. Thermal transfer method printing
3. Maximum 300mm/s printing speed(SRP-350V)
4. 145 x 195 x 146 (W X D X H)
5. Interface: USB(Built-in), Ethernet, Serial, Dual Serial, Parallel
6. Equipped with data buffer (receives print data even while printing)
7. Can print a range of barcodes
8. Range of printing density selectable
(controlled with virtual memory switch management)

Ver. 1.00
- 11 -
SRP-350/352V
Symbol Information
DC (Direct current)
Error, Warning
Paper Feeding
Stand-By
USB
Ethernet

Ver. 1.00
- 12 -
SRP-350/352V
1. Content Confirmation
• If there is any part missing, please contact the place of purchase.
• The actual part may look different from the image.
SRP-350/352V
Standard Components
Installation Guide
Paper
AC/DC Adapter
Cable Cover
Power Cord
USB A-B Cable
Option Components
Serial Cable
(9pin - 9pin)
Serial Cable
(9pin - 25pin)
Parallel Cable
(25pin - 36pin)

Ver. 1.00
- 13 -
SRP-350/352V
2. Product Part Names
2-1 Printer Part Names
Controller
Cable Cover
Power Button
Cover-Open
Button
Printer Cover
Manual Cutter
Cutter Cover

Ver. 1.00
- 14 -
SRP-350/352V
2-2 Interface Part Names
• Connect the printer to the host computer using the right interface cable that complies
with the specifications of the interface.
2-2-1 USB Interface (Built-in)
Pin No.
Signal Name
Designation (Color)
Function
Shell
Shield
Drain Cable
Frame Ground
1
VBUS
RED
Host Power
2
D-
WHITE
Data Line (D-)
3
D+
GREEN
Data Line (D+)
4
GND
BLACK
Signal Ground
Connect or disconnect the communication cable while the printer
power is off. If power is on, your data may be lost.
USB Port

Ver. 1.00
- 15 -
SRP-350/352V
2-2-2 Ethernet Interface
2-2-2-1 IFJ-E Ethernet Interface Card
2-2-2-2 IFJ-EL Ethernet Interface Card
1) Dip Switch : Ethernet interface is only available (USB interface disabled)
Ethernet port
Function Key
Ethernet Port
Dip Switch

Ver. 1.00
- 16 -
SRP-350/352V
2) Dip Switch : USB interface is only available (Ethernet interface disabled)
Pin No.
Signal Name
Designation (Color)
Function
1
TD+
WHITE ORANGE
Transmit +
2
TD-
ORANGE
Transmit -
3
CT
WHITE GREEN
Center tap
4
NC
BLUE
-
5
NC
WHITE BLUE
-
6
NC
GREEN
-
7
RD+
WHITE BROWN
Receive +
8
RD-
BROWN
Receive -
- When IFJ-EL card is built in only one interface can be available between
Ethernet and USB
① Dip switch : Ethernet interface is only available
(USB interface built in printer disabled)
② Dip switch : USB interface is only available
(Ethernet interface disabled)
- Connect or disconnect the interface cable after the printer powered off.
- Change the ethernet interface card dip switch after the printer
Powered off.
- Refer to the utility and network connection manual for Interface
connection information. (www.bixolon.com)
Ethernet Port
Dip Switch

Ver. 1.00
- 17 -
SRP-350/352V
2-2-3 Serial Interface Card (RS-232C)
2-2-3-1 Serial Single Interface
Pin No.
Signal Name
Direction
Function
1
FG
-
Frame Ground
2
TxD
Output
Transmit Data
3
RxD
Input
Receive Data
4
RTS
Output
Ready To Send
6
CTS
Input
Clear To Send
7
SG
-
Signal Ground
20
DTR
Output
Data Terminal
Ready
Connect or disconnect the communication cable while the printer
power is off. If power is on, your data may be lost.
Serial Port

Ver. 1.00
- 18 -
SRP-350/352V
2-2-3-2 Serial Dual Interface Card
* Printer Side
DSUB 9pin
Pin No.
RJ45
Pin No.
Signal Name
Direction
Function
1
1
NC
-
-
2
2
TxD
Output
Transmit Data
3
3
RxD
Input
Receive Data
5
5
GND
-
Signal Ground
6
6
DTR
Output
Data Terminal
Ready
7
7
CTS
Input
Clear To Send
8
8
RTS
Output
Ready To Send
9
-
NC
-
-
Connect or disconnect the communication cable while the printer
power is off. If power is on, your data may be lost.
Serial Port (9pin)
Serial Port (RJ45)

Ver. 1.00
- 19 -
SRP-350/352V
2-2-4 Parallel Interface Card (IEEE1284)
Pin No.
Source
Compatibility
Mode
Nibble Mode
1
Host
nStrobe
HostClk
2
Host/Printer
Data 0 (LSB)
-
3
Host/Printer
Data 1
-
4
Host/Printer
Data 2
-
5
Host/Printer
Data 3
-
6
Host/Printer
Data 4
-
7
Host/Printer
Data 5
-
8
Host/Printer
Data 6
-
9
Host/Printer
Data 7 (MSB)
-
10
Printer
Nack
PtrClk
11
Printer
Busy
PtrBusy /Data3,7
12
Printer
Perror
AckDataReq/Data2,6
13
Printer
Select
Xflag/Data1,5
14
Host
nAutoFd
HostBusy
15
-
NC
NC
16
-
GND
GND
17
-
FG
FG
18
Printer
Logic-H
Logic-H
19~30
-
GND
GND
Parallel Port

Ver. 1.00
- 20 -
SRP-350/352V
31
Host
nInit
nInit
32
Printer
nFault
nDataAvail/Data0,4
33
-
GND
ND
34
Printer
DK_Status
ND
35
Printer
+5V
ND
36
Host
nSelectIn
1284-Active
Connect or disconnect the communication cable while the printer
power is off. If power is on, your data may be lost.