BIXOLON SPP-C200 User manual

User’s Manual
SPP-C200
MOBILE PRINTER
Ver. 1.00
http://www.bixolon.com

Ver. 1.00
- 2 -
SPP-C200
Table of Contents
Copyright .......................................................................................................................... 3
WARNING & CAUTION ..................................................................................................... 6
Manual Introduction ....................................................................................................... 9
Product Introduction......................................................................................................10
1. Prepration....................................................................................................................11
1-1 Components ....................................................................................................................11
1-2 Front Part Names ............................................................................................................12
1-3 Rear Part Names .............................................................................................................12
2. Installation & Connection ..........................................................................................13
2-1 Battery Installation..........................................................................................................13
2-2 Battery Charging .............................................................................................................14
2-3 Media Installation............................................................................................................15
2-4 Bluetooth Connection.....................................................................................................16
2-5 Interface Cable Connection............................................................................................17
3. Use ................................................................................................................................18
3-1 Using Belt Clip..................................................................................................................18
3-2 Using Control Button ......................................................................................................19
3-5-1 Power Button ......................................................................................................19
3-5-2 Media Feed Button .............................................................................................19
3-5-3 ERROR/BATT/STATUS LED .................................................................................20
4. Self-Test........................................................................................................................21
4-1 Self-Test Instructions ......................................................................................................21
4-2 Self-Test Sample ..............................................................................................................22
5. Cleaning .......................................................................................................................23
6. Appendix ......................................................................................................................24
6-1 Printer Specifications ......................................................................................................24

Ver. 1.00
- 3 -
SPP-C200
Copyright
© BIXOLON Co., Ltd. All rights reserved.
This user manual and all property of the product are protected under copyright law.
It is strictly prohibited to copy, store, and transmit the whole or any part of the manual
and any property of the product without the prior written approval of BIXOLON Co., Ltd.
The information contained herein is designed only for use with this BIXOLON product.
BIXOLON is not responsible for any direct or indirect damages, arising from or
related to use of this information.
• The BIXOLON logo is the registered trademark of BIXOLON Co., Ltd.
•All other brand or product names are trademarks of their respective companies or
organizations.
BIXOLON maintains ongoing efforts to enhance and upgrade the functions and quality
of all our products.
In the following, product specifications and/or user manual content may be changed
without prior notice.
Caution
Electronics, such as printers, are prone to damage by static electricity. Therefore, to
protect the printer from static electricity, be sure to turn off the printer before connecting
or disconnecting the cable to the rear of the printer. If the printer is damaged by static
electricity, contact your local dealer.

Ver. 1.00
- 4 -
SPP-C200
Compliance information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Caution: Exposure to Radio Frequency Radiation.
To comply with FCC RF exposure compliance requirements, a separation distance of at
least 20 cm must be maintained between the antenna of this device and all persons.
Class B Digital Device: Wired Device
This Apparatus complies with class “B” limits for radio interference as specified in the
Canadian department of communications radio interference regulations.
This Class B digital apparatus complies with Canadian ICES-003.
This device contains licence-exempt transmitter(s) that comply with Innovation, Science
and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.

Ver. 1.00
- 5 -
SPP-C200
Cet appareil contient un ou plusieurs émetteurs exempts de licence qui sont conformes
aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux
appareils exempts de licence.
Son utilisation est sujette aux deux conditions suivantes :
(1) Cet appareil ne doit pas produire d'interférences.
(2) Cet appareil doit accepter tout type d’interférences, notamment les interférences
pouvant provoquer une utilisation non désirée de l’appareil.
Caution: Any Changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate the equipment.
Informations de conformité
Appareil numérique de classe B: appareil filaire
Get appareil est conforme aux normes class “B” d’interference radio tel que specifier par
ministre canadien des communications dans les reglements d’interference radio.
Cet appareil numérique de la classe B est conform à la norme NMB-003 du Canada.
Waste Electrical and Electric Equipment (WEEE)
This marking shown on the product or its literature, indicates that is should not
be disposed with other household wastes at the end of its working life, To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. Household users
should contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take this item for
environmentally safe recycling. Business users should contact their supplier and check
the terms and conditions of the purchase contract. This product should not be mixed with
other commercial wastes for disposal.

Ver. 1.00
- 6 -
SPP-C200
WARNING & CAUTION
It describes death, physical injuries, serious financial losses, and damage
to data etc. that can be caused to the user.
Do not connect multiple products to one
single power outlet. Do not connect the
product to a loose power outlet.
Use only power outlets that meet the
standard. Connect the power cord only to a
grounded power outlet. Noncompliance
may cause electric shock or fire.
Use only authentic products from
BIXOLON. The company will not provide
post-sale support for damage or other
quality issues that any fake
(refurbished) products may incur.
Do not bend or strain the power cord
excessively. Push the power cord all the way
into the power outlet lest it remain loose. Make
sure to hold the cord tight when separating it
from the power outlet. Do not remove the
power cord while the product is in use.
Noncompliance may cause electric shock or
fire.
Keep small accessories or other packaging
materials away from young children.
Beware: children may swallow them.
Mishandling the product may incur
injuries. If a child has swallowed any
such thing, see a doctor at once.
Do not touch the power cord with wet
hands when pulling it from a power outlet.
If the power plug or outlet is smeared with
extraneous matter, wipe it with a dry cloth.
Noncompliance may cause electric shock
or fire.
Do not allow the product to be
damaged by heavy objects.
Noncompliance may cause electric
shock or fire.

Ver. 1.00
- 7 -
SPP-C200
If the product emits a strange sound, burning
smell, or smoke, turn off the power immediately
and unplug the power cord. If the product is
dropped or its exterior is damaged, turn off the
power immediately and unplug the power cord.
Do not subject the product to shock. It may
start a fire. It may damage the product.
Install the product in a well-ventilated place by keeping it
a certain distance from the wall. The product installed in
certain places such as where a lot of fine dust is generated,
where the temperature is too high or too low, where there is
a lot of moisture or water, and at airports or stations that are
used continuously for a long time may suffer serious quality
problems due to the influence of the surrounding
environment. An increase in internal temperature may
start a fire. Be sure to contact the place of purchase
before installing the product.
Install the product in a fixed place
preventing it from tipping over. When
moving the product, turn off the power and
disconnect all cables connected to the
product, including the power cord. It may
damage the product.
Never disassemble, repair, or modify
the product at your own discretion.
When repair is necessary, contact the
place of purchase.
Do not let any foreign substances
enter the product. Do not place heavy
objects, liquids, or metals on the
product. It may start a fire.
It may damage the product.
If there is a problem with the
product, please contact the place of
purchase. In addition, Bixolon
website (http://www.bixolon.com)
provides product repair.

Ver. 1.00
- 8 -
SPP-C200
WARNING & CAUTION
It's to use the battery properly and prevent danger or physical damage,
so please keep it.
Do not subject the battery to strong impact or throw it.
Do not disassemble or modify the battery.
Do not allow battery leakage to come into contact with
your eyes or skin. Keep the battery out of the reach of
children and make sure that children do not swallow it.
Otherwise, it can cause the deterioration of battery
performance and lifespan, overheating, rupture, or
ignition. If it comes in contact with skin or is
swallowed, consult a doctor immediately.
If the battery is not to be used for a long time, disconnect it from
the device being used and keep it in a dry place. Even if it is not
used for a long time, charge it at least once every 6 months
while in storage. Do not place the battery in places exposed to high
temperatures (direct sunlight, inside a car, etc.) or where static
electricity is generated (near home appliances, etc.), or near heat
generating devices (heating device, etc.). Do not put the battery in a
fire, microwave, or high pressure (pressure cooker, etc.).
Make sure that the product does not come in contact with metals
(coins, necklaces, etc.) or liquids (water, salt water, etc.).
Stop using the battery if it develops an odor or any other
abnormalities such as heat, discoloration, deformation, or leakage
while using, storing, or charging the battery.
Do not be confused about the (+) and (-) terminals
of the battery. Do not let metal contact the (+) and
(-) terminals of the battery. If the (+) and (-)
terminals of the battery are smeared with
extraneous matter, wipe them clean with a piece of
dry cloth. Otherwise, it can cause deterioration of
battery performance and lifespan, overheating,
rupture, or ignition.
The battery should only be charged using the adapter
or charger provided by Bixolon, and if charging fails
after the specified charging time (6 hours), stop
charging. Do not charge the product longer than the
charging time specified in this manual. Otherwise, it
can cause deterioration of battery performance
and lifespan, overheating, rupture, or ignition.
Store and use the battery within the proper
operating temperature range.
- Charging: 0 - 40℃(32 - 104℉)
- In use: -15 - 50℃(5 - 122℉)
- Long-term storage (more than 30 days): 15 - 40℃(5 - 104℉)
Otherwise, it can cause deterioration of battery
performance and lifespan, overheating, rupture,
or ignition.
Be sure to turn off the power of the device the battery
serves after use. When disposing of the battery,
completely discharge the battery and insulate the
terminals with tape, etc.
Dispose of it in a designated place according to
the relevant laws and regulations of the country.

Ver. 1.00
- 9 -
SPP-C200
Manual Introduction
The manual provides basic information on the printer and describes how to install, use,
and inspect it. To ensure your safety and prevent damage to your property, make sure
you read the manual thoroughly before using the machine.
Manual Symbol Introduction
Precaution
& Warning
It describes death, physical injuries, serious financial losses,
and damage to data etc. that can be caused to the user.
Note
It provides additional information on the function and
performance of the product.

Ver. 1.00
- 10 -
SPP-C200
Product Introduction
The SPP-C200 is a 2-inch thermal mobile label printer.
The printer is compact and light and equipped with Bluetooth connectivity.
The main features of the printer are as follows
1. 2-inch Mobile Label Printer
2. Maximum 80 mm/s (3.15ips) printing speed.
3. Compact and light design 79.5 x 115.5 x 45 mm
(3.13 × 4.55 × 1.77 inch) (W x D x H)
4. Supports Bluetooth V5.0 (Classic / LE)
Product Symbol Introduction
DC (Direct Current)
USB

Ver. 1.00
- 11 -
SPP-C200
1. Prepration
1-1 Components
• If any items are missing, contact the place of purchase.
• The image may differ from the actual product.
※Basic items
SPP-C200
Battery Pack
USB Type-C
(A to C)
Interface Cable
Belt Clip
Printer
Installation Guide

Ver. 1.00
- 12 -
SPP-C200
1-2 Front Part Names
1-3 Rear Part Names
Media Cover
Power Button
Paper Feed Button
Cover Open Button
Status LED
Error LED
Charge
Indication LED

Ver. 1.00
- 13 -
SPP-C200
2. Installation & Connection
2-1 Battery Installation
1) Insert battery into the printer as
pictured.
2) Connect the hook of the battery cover
to the bottom of the printer.
3) Press the battery cover into place until
you hear a “click” sound.
Since the battery is partially changed at the time of purchase, charge the
battery prior to product use.
Before using, charge the battery with a USB Type-C cable.
AC/DC adapters are not provided.
Always turn off the printer before removing the battery.
Otherwise, serious electrical damage or physical injury can occur.

Ver. 1.00
- 14 -
SPP-C200
2-2 Battery Charging
1) Turn off the printer power.
2) ①Open the external interface cap.
3) Connect USB Type-C cable ②to
printer power/cable port.
4) Charge after connecting USB Type-C
cable ③to your device’s (PDA, PC,
etc.) USB port.
LED
Charge Status
Charge Time
Red LED On
Charging
Within 6 hours
Green LED On
Fully Charged
Red LED Blinking
The battery is not installed
properly
• Charge the battery only after disconnecting the power to your
device.
• Use only genuine products supplied by Bixolon.
Otherwise, the product may malfunction or there is a risk of
personal injury.
①
②
③
Power/Cable Port

Ver. 1.00
- 15 -
SPP-C200
2-3 Media Installation
1) Press the Open button to open the
Media cover.
2) Insert the Media as shown in the image.
(Remove any remaining core of a fully
used Media roll.)
3) Take care to align the Media correctly.
4) Pull the Media out as shown in the
image and close the Media cover.
5) Tear off any excess Media in the
direction of the side of the printer.
• When opening or closing the cover, be careful not to pinch your
fingers.
• Do not open the print head levers while the printer is printing.
The printer may be damaged.

Ver. 1.00
- 16 -
SPP-C200
2-4 Bluetooth Connection
1) The printer can be connected to devices equipped with Bluetooth communication
capacity (PDAs, PCs, etc.).
2) Use the Bluetooth connection function supported by the device to connect to the
printer.
• Refer to the Bluetooth Connection Manual for detailed
information on its connection.
• You can check the bluetooth environment (authentication, encryption,
connection mode) via the self-test page.

Ver. 1.00
- 17 -
SPP-C200
2-5 Interface Cable Connection
1) ①Open the external interface cap.
2) Connect USB Type-C Cable ②to
printer power/cable port.
3) Connect USB Type-C cable ③to your
device’s (PDA, PC, etc.) USB port.
A USB Type-C cable that supports USB 2.0 or a USB Type-C cable supplied
(sold separately) by Bixolon can be used as an interface cable.
①
②
③
Power/Cable Port

Ver. 1.00
- 18 -
SPP-C200
3. Use
3-1 Using Belt Clip
1) Insert the belt clip screw into the belt
clip hole.
2) Use a coin to tighten the belt clip
screw as shown in the image.
3) Insert the clip to the belt.
Belt Clip
Coin
Belt

Ver. 1.00
- 19 -
SPP-C200
3-2 Using Control Button
3-5-1 Power Button
This button is used to turn the printer on and off.
1) When the printer is off, press this button for approximately 2
seconds to turn on the power.
2) When the printer is on, press this button for approximately 2
seconds to turn off the power.
3-5-2 Media Feed Button
To feed media manually, press this button.
In addition, self-testing and Hexadecimal Dumping can be done.
1) Refer to “4. Self-Test” for self-test information.
2) Refer to the “service manual”regarding Hexadecimal
Dumping.

Ver. 1.00
- 20 -
SPP-C200
3-5-3 ERROR/BATT/STATUS LED
• ERROR LED
1) If the red LED is blinking, the media cover is open or missing, or the head is
overheated.
(Replace the roll of media or turn off the printer for at least 10 minutes.)
2) If the red LED continues to blink, it may indicate a more serious problem with the
product. Call your authorized service center.
• BATT LED
1) If the green LED is lit, the battery is fully charged.
2) If the green LED is blinked, the battery is half charged.
3) If the red LED is blinked, the battery must be charged or replaced.
• STATUS LED
1) When using Bluetooth, if the green LED and the battery indicator are both on, the
printer is connected to Bluetooth.