Black & Decker PRSM600 User manual

Multi Purpose Kitchen Machine
PRSM600
Please read through this booklet for safe and efficient use of the appliance.
We urge you to read the "Hint's" section and also follow all detailed
instructions even if you are familiar with using this appliance.
Keep this guide handy for future reference.
First Use Safety Recommendation
English Page 02
Arabic Page 25

While using electrical appliances, in order to reduce the risk of fire, electric shock,
and/or injury to persons, basic safety precautions should be followed, including the
following:
• Read all instructions carefully, even if you are familiar with the appliance.
• To protect against the risk of electric shock, DO NOT IMMERSE the appliance,
cord set or plug in water or other liquids.
• To clean, wipe the exterior with a damp cloth.
• Close supervision is necessary when any appliance is used near children. Never
leave an appliance unattended when in use.
• If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
• Switch off and remove the plug from the power outlet when not in use before
assembling or disassembling parts, cleaning or carrying out any maintenance of
the appliance. Never pull the cord while unplugging out from power outlet.
• Do not operate the appliance if its damage in any manner. Return the complete
appliance to your nearest authorized service facility for examination, electrical
repair, mechanical repair or adjustments to avoid any hazard.
• The use of attachments or accessories not recommended or sold by this
appliance manufacturer may result in fire, electric shock or personal injury.
• Do not let the cord hang over the edge of a table, counter, or touch hot surfaces.
• Avoid touching hot surfaces, use handles and knobs.
• Do not operate or place any part of this appliance on or near any hot surfaces
(such as gas or electric burner or in a heated oven).
• Do not abuse the cord. Never carry the appliance by the cord or yank it to
disconnect it from the outlet; instead, grasp the plug and pull to disconnect.
• When using an extension cord with your appliance, make sure the extension cord
is correctly wired, and rated for its use.
• This product is intended for household use only.
• Do not attempt to repair the appliance yourself; instead, take it to your Black &
Decker-owned or Authorized Service Centre for repair.
IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS
-2-
English

English
-3-
Fig A
14
15
16
17
12 13
9
6
3
4
11
10
5
7
812

English
-4-
Fig C
19
18
20
Fig B

English
-5-
Fig D
22
26
25
23
29
30
31
28
27
30 34
24
31
21
Fig E
32 33
23

-6-
English
Intended use
Your Black & Decker stand mixer has been
designed for blending and mixing food and
beverage ingredients. With the attachments
provided, it is also possible to mince
ingredients & extrude cookie dough into
various shapes. Do not use this appliance
for any other purpose.
This product is intended for household use
only.
Safety instructions
Warning! When using mains-powered
appliances, basic safety precautions,
including the following, should always be
followed to reduce the risk of fire, electric
shock, personal injury and material
damage.
Read all of this manual carefully
before using the appliance.
• The intended use is described in this
manual. The use of any accessory or
attachment or the performance of any
operation with this appliance other than
those recommended in this instruction
manual may present a risk of personal
injury.
• Retain this manual for future reference.
Using your appliance
• Make sure that the appliance is switched
off before connecting to or
disconnecting from the power supply.
• Always take care when using the
appliance.
• Do not use the appliance outdoors.
• Always protect the motor unit from water
or excessive humidity.
• Do not operate the appliance if your
hands are wet.
• Do not operate the appliance if you are
barefoot.
• Do not touch moving parts. Keep long
hair and loose clothing out of the way of
the moving parts.
• Guide the power supply cord neatly so it
does not hang over the edge of a work
top and cannot be caught accidentally or
tripped over.
• Never pull the power supply cord to
disconnect the plug from the socket.
Keep the power supply cord away from
heat, oil and sharp edges.
• Switch off and wait for the motor to stop
running before disconnecting the
appliance from the power supply.
• Never detach any part or accessory
while the appliance is still connected to
the power supply. Always disconnect the
appliance from the power supply first.
• If the power supply cord is damaged
during use, disconnect the appliance
from the power supply immediately. Do
not touch the power supply cord before
disconnecting from the power supply.
• Disconnect the appliance from the power
supply when not in use, before fitting or
removing parts and before cleaning.
• Misuse could cause an injury.
• Keep loose clothing, hair, jewellery etc.
away from moving parts.
Fig F

English
-7-
• Care is needed when handling cutting
blades, especially when removing the
blades and during cleaning.
• After cleaning, refit the bowl. This
ensures the coupling underneath is
protected.
• This appliance is fitted with overload
protection. If the unit stops working,
switch the unit off and remove the plug
from the power supply, wait for 5 minutes
then replace the plug.
• If the unit does not function please return
it to your local service agent.
Safety of others
• Do not allow children or any person
unfamiliar with these instructions to use
the appliance.
• Do not allow children or animals to come
near the work area or to touch the
appliance or power supply cord. Close
supervision is necessary when the
appliance is used near children.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been give supervision
or instruction concerning use of the
appliance by a person responsible for
their safety.
• Children must be supervised to make
sure that they do not play with the
appliance.
After use
• Switch off the appliance before cleaning,
changing accessories or approaching
parts which move in use.
• Switch off and remove the plug from the
socket before leaving the appliance
unattended and before changing,
cleaning or inspecting any parts of the
appliance.
• When not in use, the appliance should be
stored in a dry place. Children should not
have access to stored appliances.
Inspection and repairs
• Before use, check the appliance for
damaged or defective parts. Check for
breakage of parts, damage to switches
and any other conditions that may affect
its operation.
• Do not use the appliance if any part is
damaged or defective.
• Have any damaged or defective parts
repaired or replaced by an authorised
repair agent.
• Before use, check the power supply cord
for signs of damage, ageing and wear.
• Do not use the appliance if the power
supply cord or mains plug is damaged or
defective.
• If the supply cord is damaged, it must be
replaced by the manufacturer or an
authorised Black & Decker Service Centre
in order to avoid a hazard.
• Never attempt to remove or replace any
parts other than those specified in this
manual.
Electrical safety
This product must be earthed.
Always check that the power supply
corresponds to the voltage on the rating
plate.
Power plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (Class 1)
appliances. Unmodified plugs and matching
outlets will reduce the risk of electric shock.
Extension cables & Class 1 product
A 3 core cable must be used as your
appliance is earthed and of Class 1
construction. Up to 30m (100 ft) can be
used without loss of power.
To avoid the risk of electric shock, do not
immerse the cord, plug or motor unit in
water or other liquid.

English
-8-
Features
1. Aluminium body
2. 4.5L and 3L Stainless steel bowl
3. 1.25L Blender jar
4. Electronic speed control
5. Meat mincer attachment
6. Beater, whisk and dough hook.
7. Cookie attachment
Parts Identification
1. Mixer head
2. Outlet cover
3. peed control dial
4. Head release lever
5. Mixer base
6. Release lever
7. Coupling
8. Bowl lid holder
9. Front cap
10. Recess
11. Power cord
12 & 13. Steel bowls
14. Whisk
15. Beater
16. Dough hook
17. Bowl lid
18. Blender jar
19. Blender lid
20. Filler cap
21. Mincer
22. Blade
23. Nut
24. Slotted coupling
25. Coarse mincing die
26. Fine mincing die
27. Tray
28. Pusher
29. Spanner
30. Plastic bowl
31. Mincer feeder tube
32. Cookie cup
33. Cookie shape selector
34. Screw
35. Kebbe attachment
Unpacking
Remove the unit from the packaging.
Wash thoroughly before first use.
Assembly
Warning! Before assembly, make sure that
the appliance is switched off and
unplugged.
Use
Figures A&B: Using the Whisk, Beater &
Dough Hook:
Place the Mixer on a flat surface. With one
hand on top of the Mixer to prevent sudden
movement, rotate the head release lever (4)
to the "UNLOCKED" position & raise the
head to the upper position.
Releasing the lever "LOCKS" the bowl in
the raised position.

English
-9-
If required, the bowl lid (17) can be fitted
over the location (8) on the mixer head
(making sure the door is facing you once it
is fitted) & turned anti-clockwise. The
bayonet fittings on the 2 parts will lock the
lid in place. Push the required attachment -
whisk (14), beater (15) or dough hook (16)
onto the coupling (7) & washer so the
horizontal pin enters the slot in the
attachment. Turning the attachment
clockwise will lock it in place. Place the
required bowl (12 or 13) in the recess (10) in
the stand & rotate it clockwise to lock it in
position
Add the required ingredients to the bowl.
Press the head release lever (4) and lower
the head. Releasing the lever will lock the
head in position.
Connect the Mixer to a suitable electrical
supply.
For short operation, hold the control dial (3)
& rotate it anti-clockwise. Once complete,
release the dial. It will automatically return
to the "0" (OFF) position.
For longer operating times, rotate the
control dial clockwise to select the
appropriate speed.
Once mixing is completed and the unit
turned off, the head can be raised and the
bowl & ingredients removed.
Never approach any moving parts until they
have come to a complete stop.
Figure C: Using the Blender:
Remove the blender lid (19) & filler cap (20)
from the blender jar (18), and add the
ingredients. Replace the lid & cap.
Place the Mixer on a flat surface.
Ensure the Mixer head (1) is locked in the
horizontal position.
Remove the outlet cover (2) from the Mixer
head. Place the Blender (17) onto the outlet
& rotate it anti-clockwise until it locks in
place.
Connect the appliance to a suitable
electrical supply.
For short operation, hold the control dial (3)
& rotate it anti-clockwise. Once complete,
release the dial. It will automatically return to
the "0" (OFF) position.
For longer operating times, rotate the
control dial clockwise to select the
appropriate speed.
Once blending is completed and the unit
turned off, the blender can be removed by
rotating it clockwise to overcome the
bayonet fitting.
Always operate the blender with the lid
fitted.
Never approach any moving parts until they
have come to a complete stop.
Figure D: Using the Mincer:
Place the Mixer on a flat surface.
Ensure the Mixer head (1) is locked in the
horizontal position.
Press the attachment release lever (6) down
and lift the front cap (9) to reveal a hole and
slotted coupling.

English
-10-
Holding the release button (6) down, fit the
assembled Mincer (21) into the hole, and
turn it to make sure the flat on the end of
the screw engages in the slotted coupling.
Release the button, & rotate the Mincer
assembly again. The screw should be
connected to the coupling. When the pin on
the release button aligns with the hole in the
Mincer, the spring will push the pin through,
locking it in place.
The feeder tube should be facing up. Fit the
tray (30) into the feeder (31) in the Mincer
head.
Remove the nut (23) by rotating it in an
anti-clockwise direction. The spanner (29)
may be required. Remove the round die (25
or 26) & replace with the one required for
the task. Locate the cut-out in the die with
the tab on the Mincer head. Replace the
nut. Place the ingredients on the tray, and a
bowl under the Mincer head.
Connect the appliance to a suitable
electrical supply.
Rotating the control dial clockwise, select a
slow speed. Using the pusher (28), push the
ingredients into the hole in the tray & down
into the Mincer.
The screw will collect the ingredients,
compressing them & moving them forward.
The blade will cut the ingredients, which will
then be forced through the die and fall into
the bowl.
Never insert fingers into the feed chute.
Only use the pusher provided.
Never approach any moving parts until they
have come to a complete stop.
The tray (27) can be used as lid on plastic
bowl (30) making it a storage bowl.
Figure E: Using the Cookie shape
selector:
Place the Mixer on a flat surface.
Ensure the Mixer head (1) is locked in the
horizontal position.
Press the attachment release lever (6) down
and Lift the front cap (9) to reveal a hole and
slotted coupling.
Holding the release button (6) down, fit the
Mincer (21) into the hole, and turn it to make
sure the flat on the end of the screw
engages in the slotted coupling. Release the
button, & rotate the Mincer assembly again.
The screw should be connected to the
coupling. When the pin on the release
button aligns with the hole in the Mincer, the
spring will push the pin through, locking it in
place.
The feeder tube should be facing up. Fit the
tray (23) into the feeder (31) in the Mincer
head.
Remove the nut (23) by rotating it in an
anti-clockwise direction. The spanner (29)
may be required. Remove the round die (25
& 26) and blade (22).
Place the cookie cup (32) (without shape
selector (33)) in the nut, and fasten it back
onto the Mincer head.
Fit the shape selector through the 2 slots in
the cookie attachment. Fit the tray (27) into
the vertical tube (31) in the Mincer head.