Black & Decker SB2200 User manual

SB2200
SB3200
SB3220
SB3240
www.blackanddecker.ae
ENAR

2
13
24
6
8
10
11
5
9
12
ENGLISH
2
(Original instructions)
13
24
6
7
8
10
11
5
9
12
13
14
15

13
14
15
8
8
8
8
6
2
3
4
13
2
9
14
13
13
15
10
11
12
Fig.1
Fig.2
3
ENGLISH
(Original instructions)

ENGLISH
4
(Original instructions)
Intended use
Your BLACK+DECKER stick blender has
been designed for blending, mixing,
beating, whipping, whisking and chopping
food and beverage ingredients depending
on the product. Do not use this appliance
for any other purpose. This product is
intended for household use only.
Safety instructions
Warning! When using
mains-powered appliances, basic
safety precautions, including the
following, should always be followed to
reduce the risk of fire, electric shock,
personal injury and material damage.
• Read all of this manual carefully before
using the appliance.
• The intended use is described in this
manual. The use of any accessory or
attachment or the performance of any
operation with this appliance other than
those recomended in this instruction
manual may present a risk of personal
injury.
• Retain this manual for future reference.
Using your appliance
• Make sure that the appliance is switched
o before connecting to or
disconnecting from the power supply.
• Always take care when using the
appliance.
• Do not use the appliance outdoors.
• Always protect the motor unit from
water or excessive humidity.
• Do not operate the appliance if your
hands are wet.
• Do not operate the appliance if you are
barefoot.
• Do not touch moving parts. Keep long
hair and loose clothing out of the way of
the moving parts.
• Guide the power supply cord neatly so it
does not hang over the edge of a
worktop and cannot be caught
accidentally or tripped over.
• Never pull the power supply cord to
disconnect the plug from the socket.
Keep the power supply cord away from
heat, oil and sharp edges.
• Switch off and wait for the motor to stop
running before disconnecting the
appliance from the power supply.
• Never detach any part or accessory while
the appliance is still connected to the
power supply. Always disconnect the
appliance from the power supply first.
• If the power supply cord is damaged
during use, disconnect the appliance from
the power supply immediately. Do not
touch the power supply cord before
disconnecting from the power supply.
• Do not operate the appliance if it is
damaged in any manner. Return the
complete appliance to your nearest
authorized service facility for
examination, electrical repair, mechanical
repair or adjustments to avoid any
hazard.
• The use of attachments or accessories
not recommended or sold by this
appliance manufacturer may result in fire,
electric shock or personal injury.
• Disconnect the appliance from the power
supply when not in use, before fitting or
removing parts and before cleaning.

5
ENGLISH
(Original instructions)
• Misuse could cause an injury.
• Keep loose clothing, hair, jewellery etc.
away from moving parts.
• Care is needed when handling cutting
blades, especially when removing the
blades and during cleaning.
Safety of others
• Do not allow children or any person
unfamiliar with these instructions to use
the appliance.
• Do not allow children or animals to come
near the work area or to touch the
appliance or power supply cord. Close
supervision is necessary when the
appliance is used near children.
• This appliance is not intended for use by
persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been give
supervision or instruction concerning use
of the appliance by a person responsible
for their safety.
• Children must be supervised to make
sure that they do not play with the
appliance.
After use
• Switch off the appliance before cleaning,
changing accessories or approaching
parts which move in use.
• Switch off and remove the plug from the
socket before leaving the appliance
unattended and before changing,
cleaning or inspecting any parts of the
appliance.
• When not in use, the appliance should be
stored in a dry place. Children should not
have access to stored appliances.
Inspection and repairs
• Before use, check the appliance for
damaged or defective parts. Check for
breakage of parts, damage to switches
and any other conditions that may aect
its operation.
• Do not use the appliance if any part is
damaged or defective.
• Have any damaged or defective parts
repaired or replaced by an authorised
repair agent.
• Before use, check the power supply cord
for signs of damage, ageing and wear.
• Do not use the appliance if the power
supply cord or mains plug is damaged or
defective.
• If the supply cord is damaged, it must be
replaced by the manufacturer or an
authorised BLACK+DECKER Service
Centre in order to avoid a hazard.
• Never attempt to remove or replace any
parts other than those specified in this
manual.
Electrical safety
Your appliance is double insulated;
therefore no earth wire is required.
Always check that the mains
voltage corresponds to the voltage on the
rating plate. Never attempt to replace the
charger unit with a regular mains plug.
To avoid the risk of electric shock,
do not immerse the cord, plug or
motor unit in water or other liquid.

6
ENGLISH (Original instructions)
Features
This tool may include some or all of the
following features
Unpacking
• Remove all packaging from the
appliance.
• Clean the appliance before first use.
Assembly
Warning! Before assembly, make sure that
the appliance is switched o and
unplugged.
Fitting and removing an attachment (Fig.1)
• Use the blending attachment (3 or 4) for
blending liquids or mashing solids.
• Use the whisk attachment (6) for mixing,
beating, whipping and creaming liquids.
• Use the chopping blade (11), Measuring
jug (9), blade mounting base (12) and
blade housing (13) for chopping
vegetables etc.
• Use the ice chopping blade (15),
Measuring jug (9), Ice chopping bowl (12)
and blade housing (13) for chopping ice
etc.
Use
Blending
• Place the ingredients into a measuring jug
or a suitable container.
• Using a stabbing motion, push the blades
(3 or 4) into the ingredients until the
correct consistency is reached.
• When blending liquids or fluid
ingredients, use short pulses to prevent
spillages.
• Keeping the blades (3 or 4) submerged
will help to prevent spillages. Take extra
care when blending hot ingredients.
Mixing
• Place the ingredients into a measuring jug
or a suitable container.
• Mix the ingredients until the correct
consistency is reached.
• Keeping the beater submerged will help
to prevent spillages. Take extra care when
mixing hot ingredients.
Chopping (Fig. 2)
Warning! The measuring jug (9) must be
used with the chopping blade (11). Do not
use the chopping blade with any other bowl.
Do not use the chopping Blade without the
supplied measuring bowl fitted.
Feature SB2200 SB3200 SB3220 SB3240
1. On/Off switch
2. Motor housing
3. Stainless steel
stem
4. Plastic stem
5. All purpose
cutting blade
6. Whisk
attachment
7. Measuring cup
8. Attachment
connector
9. Measuring jug
10. Ice chopping
blade
11. Chopping
blade
12. Blade
mounting base
13. Gearbox
14. Lid/Base
15. Ice chopping
bowl

7
ENGLISH
(Original instructions)
• Place blade mounting base (12) in the
measuring bowl (8) Then place the
chopping (11) onto blade mounting base
(12).
• Place the ingredients in the measuring
bowl (9).
• Fit the motor housing (2) into the
gearbox (13) and rotate anti-clockwise to
lock in position. Place the motor &
gearbox into the measuring jug (9)
making sure the blade fits into the recess
in the gearbox
• Chop the ingredients until the correct
consistency is reached.
• Once chopping is completed, unplug the
appliance & allow the blades to stop
moving before removing any parts or
approaching parts that move in use.
Ice Chopping (Fig. 2)
Warning! The measuring jug (9) and the ice
chopping bowl (15) must be used with the
ice chopping blade (10). Do not use the ice
chopping blade with any other bowl. Do not
use the ice chopping Blade without the
supplied ice chopping bowl fitted.
• Place the ice chopping blade (10) in the
ice chopping bowl (15). Place the ice
chopping bowl into the measuring jug as
shown in (Fig.2) to catch the ice residue.
• Place the ice in the ice chopping bowl
(15).
• Fit the gearbox (13) and rotate it in an
anti-clockwise direction to lock it in
place.
• Fit the motor housing (2) into the
gearbox (13) and rotate anti-clockwise to
lock in position. Place the motor &
gearbox into the measuring jug (9)
making sure the blade fits into the recess
in the gearbox
• Chop the ingredients until the correct
consistency is reached.
• Once chopping is completed, unplug the
appliance & allow the blades to stop
moving.
Switching on and o
• To switch the appliance on, press the
speed control switch (1).
• Keep the switch pressed for continuous
operation.
• To switch off, release the switch.
Warning! Do not operate the appliance
continuously for more than 30 seconds.
After operating the appliance continuously
for 30 seconds, let it cool down for at least 1
minute before operating it again. This can be
repeated up to ten times then the appliance
must be left to cool at room temperature.
Warning! After switching o always allow
the motor to stop before approaching the
blade.
Operating times and preperations
Ingredients Maximum Preperation Time
Quantity
Meat 300g 2cm cubes Dice 15 - 30s
Onions 100g Cut into 15 - 10s
8 pieces
Baby food 170g Cook and 10 - 20s
dice
Nuts 350g Remove 18 - 15s
shell
Garlic 20 pieces Cut into 10 - 20s
pieces
Dry bread 150g Cut into 10 - 20s
pieces
Parsley 1 sprig Remove 10 - 20s
stalks
Dough 200g Mix with 15 - 25s
water
(250ml)

ENGLISH
8
(Original instructions)
Cleaning and maintenance
Warning! Switch the appliance o and
unplug it before cleaning or maintenance.
Be careful when cleaning the blades; they
are sharp.
Warning! Do not immerse the appliance, the
cord set or the plug in water or any other
liquid.
• Wash the attachments in warm soapy
water and dry well.
• Wipe the motor unit (2) with a damp
cloth. Do not use any abrasive or
solvent-based cleaner.
Always clean the appliance immediately
after use. Do not let food dry on to the
blades as this will make cleaning dicult.
Voltage 220 - 240 Volts
Supply 50/60Hz
Power 500W
Weight 1.1kg
Technical Data
Protecting the environment
Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your
Black+Decker product needs replacement,
or if it is of no further use to you, do not
dispose of it with other household waste.
Make this product available for separate
collection.
• Black+Decker provides a facility for
recycling Black+Decker products once
they have reached the end of their
working life. This service is provided free
of charge. To take advantage of this
service please return your product to any
authorised repair agent who will collect
them on our behalf.
• You can check the location of your
nearest authorised repair agent by
contacting your local Black+Decker
oce at the address indicated in this
manual. Alternatively, a list of authorized
Black+Decker repair agents and full
details of our after-sales service and
contact are available on the Internet at:
www.2helpU.com.

9
ENGLISH
(Original instructions)
Warranty
Black+Decker is confident of the quality of
its products and oers an outstanding
warranty.
This warranty statement is in addition to and
in no way prejudices your statutory rights.
The warranty is valid within the territories of
the Member States of the European Union
and the European Free Trade Area.
If a Black+Decker product becomes
defective due to faulty materials,
workmanship or lack of conformity, within
24 months from the date of purchase,
Black+Decker warranty to replace defective
parts, repair products subjected to fair wear
and tear or replace such products to ensure
minimum inconvenience to the customer
unless:
The product has been used for
trade, professional or hire
purposes;
The product has been subjected to
misuse or neglect;
The product has sustained damage
through foreign objects,
substances or accidents;
Repairs have been attempted by
persons other than authorised
repair agents or Black+Decker
service sta.
To claim on the warranty, you will need to
submit proof of purchase to the seller or an
authorised repair agent. You can check the
location of your nearest authorised repair
agent by contacting your local
Black+Decker oce at the address
indicated in this manual.
Alternatively, a list of authorised
Black+Decker repair agents and full details
of our after-sales service and contacts are
available on the Internet at:
www.2helpU.com.

FRANÇAIS
10
(Traduction des instructions d'origine)
2
13
24
6
8
10
11
5
9
12
13
24
6
7
8
10
11
5
9
12
13
14
15