Black Box ACX1R Series Operator's manual

724-746-5500 | blackbox.com724-746-5500 | blackbox.com 724-746-5500 | blackbox.com
Page 5 Page 6
© Copyright 2011. Black Box Corporation. All rights reserved.
Black Box and the Double Diamond logo are registered trademarks,
and ServSwitch is a trademark, of BB Technologies, Inc. TOSLINK is a
registered trademark of Kabushiki Toshiba dba Toshiba Corporation.
Any other trademarks mentioned in this manual are acknowledged to
be the property of the trademark owners.
BL A C K B O X®
Quick Start Guide
Increase the distance between a source
(computer, CPU) and its console (keyboard,
monitor, and mouse) and other peripheral
devices.
ServSwitch™DKM Compact Extenders
ACX1T, ACX1R Series
Black Box Tech
Support: FREE! Live.
24 / 7. Tech support
the way it should be.
Great tech support is just 30 seconds
away at 724-746-5500 or blackbox.com.
Order toll-free in the U.S.:
Call 877-877-BBOX
(outside U.S. call 1-724-746-5500)
FREE technical support
24 hours a day, 7 days a week:
Call 724-746-5500 or
fax [phone]
Mailing address:
Black Box Corporation
1000 Park Drive
Lawrence, PA 15055-1018
Web site: www.blackbox.com
E-mail: [e-mail]
Customer
Support
Information
BL A C K B O X®
ServSwitch DKM Quick Start Guide
ACX1T Quick Start Guide, rev. 1
ACX1T
1. What’s Included
Your packages should contain the following
items. If anything is missing or damaged,
contact Black Box Technical Support at
724-746-5500 or [e-mail].
• DKM Compact Extender CPU Unit
• DKM Compact Extender CON Unit
• (2) 5-VDC international power supply units
Table 3-1. Component descriptions.
Number Description
1Source (computer, CPU)
2CPU Unit
3Interconnect cable
4CON Unit
5Console (monitor, keyboard, mouse)
4. DDC Information Download
By default, data from the internal DDC list is reported
to the source (computer, CPU). If these settings do not
work properly, you can download and store the con-
sole monitor’s DDC information internally. The devices
must be configured accordingly.
On all KVM Extenders with USB-HID support, users
can load the console monitor’s DDC information by
using keyboard commands.
1. Enter Command Mode with the “hotkey.”
2. Press the <a> key to download the console
monitor’s DDC information.
The screen will go black for a short time.
Command Mode is now closed, and the keyboard
LEDs return to previous status.
This re-adjusts the video mode and should give you
optimal screen quality. The CPU should now show the
console monitor as the current screen, together with
the available video resolutions.
The DDC information of the console monitor was
loaded once.
To re-load the DDC information, repeat the operation.
During DDC transfer, the status LEDs on both CON
and CPU units flash while reading (CON unit) and
copying (CPU unit) information.

724-746-5500 | blackbox.com724-746-5500 | blackbox.com 724-746-5500 | blackbox.com
ServSwitch DKM Quick Start Guide ServSwitch DKM Quick Start GuideServSwitch DKM Quick Start Guide
Page 3Page 2 Page 4
• (1) country-specific power cord
• This printed Quick Start Guide
The Single-Head devices also include:
• DVI video cable (6 ft. [1.8 m], DVI-D, male to male)
Figure 1-1. DVI video cable.
• (1) USB cable (6 ft. [1.8 m], Type A to Type B)
Figure 1-2. USB cable.
The Dual-Head devices also include:
• DVI video cable (6 ft. [1.8 m], DVI-D male to male)
Figure 1-3. DVI cable.
• USB cable (6 ft. [1.8 m], Type A to Type B)
Figure 1-4. USB cable.
The Analog Audio/Serial option also includes:
• Serial cable (6 ft. [1.8 m], RS-232 male connector)
Figure 1-5. Serial cable.
• Stereo jack cable (5.2 ft. [1.6 m], 3.5-mm male
connector)
Figure 1-6. Stereo jack cable.
ACX1T ACX1TACX1T
The Digital Audio option also includes:
• RCA cable (8.2 ft. [2.5 m], Cinch male connector)
Figure 1-7. RCA cable.
• TOSLINK® cable (6 ft. [1.8 m], F05 male connector)
Figure 1-8. TOSLINK cable.
The USB-HID Add-on option also includes:
• USB cable (6 ft. [1.8 m], USB Type A to Type B)
Figure 1-9. USB cable.
The USB 2.0 Add-on option also includes:
• USB cable (6 ft. [1.8 m], USB Type A to Type B)
Figure 1-10. USB cable.
The VGA option also includes (instead of DVI-D):
• VGA cable (6 ft. [1.8 m], VGA male to DVI-I male)
Figure 1-11. USB cable.
• Infrared remote control
2. System Setup
NOTE: If you are a first-time user, we recommend that
you set up the system as a test setup. This will
enable you to identify and solve any cabling
problems, and experiment with your system
more conveniently.
1. Switch off all devices.
CON Unit installation
2. Connect your monitor(s), keyboard and mouse to
the CON Unit.
3. Connect the CON Unit with the interconnect
cable(s).
4. Connect the 5-VDC power supply to the CON Unit.
CPU Unit Installation
5. Connect the source (computer, CPU) with the
supplied cables to the CPU Unit. Make sure the
cables are not strained.
6. Connect the CPU Unit to the interconnect cable(s).
7. Connect the 5-VDC power supply to the CPU Unit.
8. Power up the system.
NOTE: To power up the system, we recommend the
following sequence: Monitor – CON Unit – CPU
Unit – source.
3. System Overview
1 2 3 4
5
Figure 3-1. System components.