Black Box RM028 User manual

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax [phone]
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com • E-mail: [email protected]
CUSTOMER
SUPPORT
INFORMATION
AUGUST 2004
RM028
19" Keyboard Tray/Monitor Shelf
Specifications
Load Capacity: 100 lb. (45.4 kg)
Color: Black powder finish
Mounting: Mounts on EIA standard 19" rails
Size: 7.2"H x 19.9"W x 10.2"D (18.3 x 50.5 x 25.9 cm)
TRADEMARKS USED IN THIS MANUAL
Any trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.

19" KEYBOARD TRAY/MONITOR SHELF
2
Overview
Use the 19" Keyboard Tray/Monitor Shelf to hold your rackmounted workstation monitor and keyboard.
The shelf mounts on EIA standard 19" rails. It accommodates all standard keyboards.
What the Package Includes
Make sure your package includes the following items. If anything is missing or damaged, please call Black Box
at 724-746-5500.
• (1) 19" Keyboard Tray/Monitor Shelf assembly
• (8) 12-24 x 5⁄8" screws
• (8) 10-32 x 1⁄4" screws
• (2) rackmount brackets
• This users’ manual
Installation
To mount the 19" Keyboard Tray/Monitor Shelf to the rack, you will use a total of eight 12-24 x 5⁄8"or 10-32 x 1⁄4"
screws. (Choose either 12-24 x 5⁄8" or 10-32 x 1⁄4", depending on your rack’s requirements.) Follow the
instructions below.
1. Locate the position on the rack for mounting the shelf assembly. See Figure 1.
Figure 1. Lining up the shelf assembly on the rack.

19" KEYBOARD TRAY/MONITOR SHELF
3
2. Mount one rackmount bracket to the rack using two 12-24 x 5⁄8" or 10-32 x 1⁄4" screws. Do not tighten the screws
yet.
3. Mount the 19" Keyboard Tray/Monitor Shelf assembly to the installed rackmount bracket by aligning
the tapped holes on the rackmount brackets with the appropriate tapped holes on the assembly.
See Figure 2. Then attach it with two more screws.
Figure 2. Attaching the assembly to the rack.
4. Using two 12-24 x 5⁄8" or 10-32 x 1⁄4" screws (depending on your rack), attach the second rackmount bracket
to the appropriate tapped holes on the opposite side of the 19" Keyboard Tray/Monitor Shelf assembly.
5. Line up the mounting holes on the second rackmount bracket with the appropriate tapped holes on the
rack. Secure it in place with two more 12-24 x 5⁄8" or 10-32 x 1⁄4" screws.
6. Tighten all screws.

1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax [phone]
© Copyright 2004. Black Box Corporation. All rights reserved.