Black Box RMT411 User manual

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax [phone]
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com • E-mail: [email protected]
CUSTOMER
SUPPORT
INFORMATION
FEBRUARY 2006
RMT411
Heavy-Duty Sliding Adjustable Shelf
Specifications
Material: 14-gauge steel
Size: 2"H x 19"W x 29.2"D (5.1 x 48.3 x 74.2 cm)
Weight: 19.8 lb. (9 kg)
Weight Capacity: 125 lb. (56.7 kg)
Overview
The Heavy-Duty Sliding Adjustable Shelf fits in a standard 19" rack cabinet. It’s constructed of 14-gauge steel
and is vented for proper airflow between the equipment and the rack. The shelf supports up to 125 pounds
(56.7 kg) of equipment.
Your package should include the following items. If anything is missing or damaged, contact Black Box at
724-746-5500.
• (1) Heavy-Duty Sliding Adjustable Shelf with (2) cable bridges installed
• (8) 10-32 screws
• (8) 12-24 screws
• (8) M6 screws
• (4) Wing nuts
Installation
1. Hold the cable support bar and pull the shelf out to remove the shelf tray from the assembly.
2. Mount the remaining part of the assembly to the mounting rails (of the desired height) using two
appropriate screws (supplied) per bracket. Do not tighten the screws.
3. Slide the shelf tray back into the mounted portion of the assembly so that the slide locks together. Tighten
the screws on the mounting brackets once the shelf tray is installed.
(Continued on the back of this page)

1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax [phone]
© Copyright 2006. Black Box Corporation. All rights reserved.
4. Attach the cable bridges to the rear slot on the shelf tray using two wing nuts per bridge.
5. Place the equipment on the shelf. Route the equipment’s cables over the cable bridges. Secure the cables to
the cable bridges with cable ties (not included).
Installing the shelf.
TRADEMARKS USED IN THIS MANUAL
BLACK BOX and the Double Diamond logo are registered trademarks of BB Technologies, Inc.
Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
Shelf tray
Cable support
bar
Cable bridges