Black Box LH2001A-ST-R3 User manual

Connect Ethernet or Fast Ethernet
segments to fiber segments without
using crossover cables.
Connect Ethernet or Fast Ethernet
segments to fiber segments without
using crossover cables.
AutoCross Media Converters
© 2007. All rights reserved. Black Box Corporation.
FREE 24-hour Tech Support: 724-746-5500
blackbox.com

2 of 3
FEATURES
• Two LEDs per port show status of UTP
and fiber links.
• Work with common networking devices.
• Operate full or half-duplex to boost
speed and distance.
• Ideal for preventing cross-cabling errors
in mixed-media network.
• Autosensing, universal power supplies.
• LinkALERT monitors 100% of physical
uplink and downlink failures to pinpoint
transmission faults.
Perform end-to-end diagnostics with the converter’s unique LinkALERT feature.
OVERVIEW
With the AutoCross Media Converters for Ethernet and
Fast Ethernet, you no longer have to deal with mismatched
transmit and receive cable pairs.
The converters contain an automatic switch in the
10BASE-T and 100BASE-TX ports. This switch senses the type
of circuit connected to the port and automatically configures
the port to match the circuit. It conveniently converts twisted-
pair media interfaces to fiber, or vice versa—in less than a
second.
For convenience and flexibility, AutoCross Media
Converters come with a universal, autosensing power supply.
Ethernet
Use the 10BASE-T to 10BASE-FL AutoCross Media Converter
when two devices need to communicate from over full
duplex (transmit and receive) or half-duplex twisted-pair cable
to fiber.
The 10BASE-T converters are available in both single-mode
and multimode versions. These converters can be used up to
100 meters (328 ft.) on the UTP link, up to 2 kilometers
(1.2 mi.) on a multimode fiber link, and up to 20 kilometers
(12.4 mi.) on a single-mode fiber link.
The 10BASE-T side is autosensing to either MDI or MDI-X.
Either a straight or crossed cable can be used to connect either
a switch or NIC. Note that the converters are not compatible
with devices that autosense speed (for example, a 10-/
100-Mbps switch); they work only with standard 10-Mbps
devices.
Fast Ethernet
If your 100-Mbps networks need conversions from fiber to
UTP and back again, then choose a 100BASE-TX to
100BASE-FX AutoCross Media Converter.
These single-port converters will help you maximize your
current investment in twisted-pair hardware while inte-
grating fiberoptic cabling to support high-speed technology.
And they’re available for either single-mode or multimode
applications.
All Fast Ethernet converters support full and half-duplex
operation. They can be used up to 100 meters (328 ft.) on the
100BASE-TX link, up to 2 kilometers (1.2 mi.) on a multimode
fiber link, and up to 20 kilometers (12.4 mi.) on a single-mode
fiber link.
The 100BASE-TX side is autosensing to either MDI or
MDI-X. Either a straight or crossed cable can be used to
connect either a switch or NIC.
Easy fiber diagnostics
AutoCross Media Converters also feature LinkALERT™,
which monitors 100% of physical uplink and downlink
failures and alerts the network if transmission fails. Without
LinkALERT, a failed link may appear normal to network
management. LinkALERT saves you the hassle of manual
troubleshooting.
Ethernet AutoCross
Media Converters
(LE2122A-R4)
4/25/07
#20417
724-746-5500 blackbox.com
With LinkALERT:
Without LinkALERT:
Normal
Indication
Fault
Indication
Normal
Indication
Normal
Indication
10BASE-T
Hub
10BASE-T
10BASE-T
Link Fault
10BASE-T
Link Fault
10BASE-T
Hub Other Media Converter
Link Down Indication
10BASE-T
Link Down Indication
10BASE-FL
Hub
10BASE-FL
Hub

3 of 3
TECH SPECS
CE Approval — Yes
Interface — LE2122A-R4 models: 10BASE-T/10BASE-FL;
LH2001A-R3 models: 100BASE-TX/100BASE-FX;
Connectors —
LE2122A-R4, LH2001A-ST-R3: (1) RJ-45, (1) pair ST®;
LE2122A-SM-R4, LH2001A-SC-R3, LH2001A-SCSM-R3: (1) RJ-45,
(1) pair SC
Indicators — LEDs: (1) Power; (1) Link Status and (1) Activity
(per each twisted-pair and fiber port)
Temperature — Operating: 32 to 122°F (0 to 50°C);
Storage: 5 to 149°F (-15 to +65°C)
Humidity — 5 to 95% noncondensing
Power — 110–240-VAC, 50–60-Hz, external autosensing power supply
Size — 1"H x 3"W x 4"D (2.5 x 7.6 x 10.2 cm)
Weight — 0.4 lb. (0.2 kg)
4/25/07
#20417
Recognize any of these situations?
• You wait more than 30 minutes to get through
to a vendor’s tech support.
• The so-called “tech” can’t help you or gives you
the wrong answer.
• You don’t have a purchase order number and the
tech refuses to help you.
• It’s 9 p. m. and you need help, but your vendor’s
tech support line is closed.
According to a survey by Data Communications
magazine, 90% of network managers surveyed say
that getting the technical support they need is extremely
important when choosing a vendor. But even though
network managers pay anywhere from 10 to 20% of their
overall purchase price for a basic service and support
contract, the technical support and service they receive
falls far short of their expectations—and certainly isn’t
worth what they paid.
At Black Box, we guarantee the best value and the
best support. You can even consult our Technical Support
Experts before you buy if you need help selecting just
the right component for your application.
Don’t waste time and money—call Black Box today.
Why Buy From Black Box?
Exceptional Value. Exceptional
Tech Support. Period.
724-746-5500 blackbox.com
Item Code
Ethernet AutoCross Media Converters
1-Port 10BASE-T to 10BASE-FL
Multimode, ST LE2122A-R4
Single-Mode, SC LE2122A-SM-R4
Fast Ethernet AutoCross Media Converters
1-Port 100BASE-TX to 100BASE-FX
Multimode, ST LH2001A-ST-R3
Multimode, SC LH2001A-SC-R3
Single-Mode, SC LH2001A-SCSM-R3
You may also need…
Category 5 Solid-Conductor Cable, 4-Pair,
Straight-Pinned, PVC, 10-ft. (3-m) EYN737MS-0010
Duplex Fiber Optic Cable, PVC,
ST-ST, Custom Lengths EFN062-CC
LH2001A-ST-R3