Black Box ACS4001A-R2-R User manual

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax [phone]
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com • E-mail: [e-mail]
Customer
Support
Information
February 2010
MT1000A-85-R4
1
BL A C K B OX®
Connects to the ServSwitch DKM DVI-D
KVM Switch.
Transmitter and Receiver Quick Install Guide
July 2010
ACS4001A-R2-T
ACS4001A-R2-R
Thank you for purchasing the Black Box transmitter (ACS4001A-R2-T) or receiver (ACS4001A-R2-R) unit. This product was
designed to be used with the ServSwitch™DKM DVI-D KVM Switching System. This product is compatible with the following
chassis versions:
• ACX0808 (8 user X 8 computers)
• ACX0816 (8 user X 16 computers)
• ACX0832 (8 user X 32 computers)
• ACX1616 (16 user X 16 computers)
• ACX1632 (16 user X 32 computers)
Quick Setup
To connect the transmitter (ACS4001A-R2-T) or receiver (ACS4001A-R2-R) to the DKM DVI-D KVM Switch, follow these
instructions and refer to the diagram on the back of this page:
1. Install the ACS4001A-R2-T unit(s) near the computer side and the ACS4001A-R2-R unit(s) near the user side.
2. Use CATx cable to interconnect the transmitters (ACS4001A-R2-T) to the RJ-45 CPU ports and the receivers (ACS4001A-R2-R)
to the RJ-45 CON ports of the DKM switch. (If you need to extend the distance farther than 459 feet (140 meters), use the
ACX1000 CATx to CATx repeater to double your length.)
3. Power on the system and verify the LED status on the transmitters and receivers to make sure everything is connected
correctly.

FREE, live, 24/7 Tech Support is just 20 seconds away.
724-746-5500 | blackbox.com
©Copyright 2010. All rights reserved.
4. Use the ServSwitch DKM Switching System to configure your system.
For more information, consult the ServSwitch DKM DVI-D KVM Switching System user manual for how to connect this unit with
your existing system (you can download the user manual at ftp.blackbox.com/manuals, or you can find it on the CD-ROM that
you received with the ServSwitch DKM Switching System).
Connect to CPU:
DVI graphic card
Local DVI-Monitor port:
Connect to local console
monitor
Connect
to CPU:
USB Remote DVI-Monitor port:
Connect to remote console
monitor
Connect to
Remote Units
(Console)
Connect to
Local Units
(CPU)
Remote keyboard/
mouse port
Network, serial
interfaces
Connect to AC
power supply
CATx cable CATx cable
Quick Setup diagram.
For more information on the ACS4001A-R2-T/R product itself, you can download its user manual from the Black Box FTP site (link
found above) or view it from the CD-ROM that came with your ServSwitch DKM Switching System.
If you need any assistance or have questions, contact Black Box Technical Support by calling 724-746-5500.
Trademarks Used in this Manual
Black Box and the Double Diamond logo are registered trademarks, and ServSwitch is a trademark, of BB Technologies, Inc.
Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.