Blanco BCC640T User manual

Instruction Manual for
Ceramic Cooktop
BCC640T /
BCC64TCOM

1
DESCRIPTION OFTHE HOB........................................................... 02
SAFETY INSTRUCTIONS ................................................................ 03
INSTALLATON .................................................................................. 05
Locating Your Built-in Hob
Electrical Connection of Your Hob
USAGE……. ...............................................................................…….11
Turn On and Turn Off The Control
Select Heater
Set Cooking Level
Turn Off Individual Heaters
Timer Function
Key Lock
Child Lock
Child Lock
Stop & Go Function
TOUCH CONTROL SAFETY FUNCTIONS........................................20
Sensor Safety Cut Off
Over Temperature Switch Off
Operating Time Limitations
Residual Heat Functions
CLEANING AND CARE......................................................................23

Dear Customer,
It is important that you should read the safety instructions and the full
manual for proper installation, operation, best performance and to extend
the life of your appliance. We recommend you to keep this manual for future
reference.
Your new hob is guaranteed and will give lasting service. This guarantee
is only applicable if the appliance has been installed and operated in
accordance with the operating and installation instructions detailed in this
manual.
SINGLEZONE
HEATER
HOB
FRAME
PANEL
Note: Appearance of your hob maybe different than the model shown above
due to its configuration.
2
DESCRIPTION OF THE HOB

Please comply with these instructions. If you do not, any damage
resulting from improper, incorrect or negligent use or improper
connection or installation is not covered by the warranty.
3
• This appliance should be used only for normal domestic use.
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience or
knowledge, unless they have been given supervision or instruction concerning
the use of the appliance by a person responsible for their safety. Children
should be supervised to ensure that they do not play with the appliance.
• This appliance must only be used for the purpose of heating or cooking
food, any other use, for example heating rooms, working surface or storage
surface, is dangerous.
• Additions or modifications to the appliance are not permitted.
• Do not place or store flammable liquids, highly inflammable materials or
fusible objects on or near the appliance.
• Small children must be kept away from the appliance.
• The appliance may only be installed and connected by an authorised
service personal.
• The electrical safety of this hob is guaranteed only if it is connected to
a properly earthed system, which complies with the electrical safety standards.
• Built-in appliances may only be used after they have been built in to
suitable built-in units and work surfaces that meet the standards.
• Do not put pressure on the power supply cable while fitting the hob.
• Power supply cable length should not exceed 2m for isolation safety.
• WARNING: In the event of faults with the appliance or damage to the
glass ceramic (cracks, scratches or splits), the appliance must be
switched off and disconnected from the electrical supply to prevent the
possibility of an electric shock.
• Repairs to the appliance must only be carried out by authorised service
personal.
• Make sure all the packaging has been removed before you use the
appliance.
• Cables from electrical appliances must not touch the hot surface of the
appliance or hot cookware.

4
• Do not cut any food on the glass of the vitroceramic hob. Glass panels
should not be used as working surfaces.
• Be careful when using small household appliances, such as irons, near
the elements.
• Do not use the cooking zones with empty cookware or without cookware.
• Make sure all the controls are in the off position when not in use.
• For cleaning, the appliance must be switched off and cooled down.
• For safety reasons, the cleaning of the appliance with steam jet or high-
pressure cleaning equipment is not permitted.
• Use only stable flat-based pans.
• Metallic objects such as knives, forks, spoons and lids should not be placed on
the hob surface since they can get hot.
• Danger of fire: Do not store items on the cooking surfaces.
• CAUTION: The cooking process has to be supervised. A short term cooking
process has to be supervised continuously.
• WARNING: Unattended cooking on a hob with fat or oil can be dangerous and
may result in a fire.
• A means for disconnection must be incorporated in the fixed wiring in accordance
with the wiring rules.
• If the supply cord is damaged, it mustbe replaced by the authorised service
center in order to avoid a hazard.
• WARNING: If the surface is cracked, switch off the appliance to avoid the
possibility of electric shock.
• The appliance is not intended to be operated by means of an external timer or
separate remote control system.

The electrical connection of this hob should be carried out by an
authorised service personal or a qualified electrician, according to the
instructions in this guide and in compliance with the current regulations.
5
• Prior to installation,ensure thatthe local distributionconditions and the
adjustment of the appliance arecompatible.
• The laws, ordinances, directives and standards in force in the country of
use are to be followed (safety regulations, proper recycling in accordance
with the regulations,etc.)
Locating your built-in hob
Afterremovingthepackagingmaterialfromtheapplianceanditsaccessories,
ensurethatthe hobis not damaged.if you suspectany damage, donot use the
appliance and contact an authorised service personalor a qualified electrician
immediately.
• This built-in hob is to be inserted into a cut out of a worktop. it will be
electricallyconnectedwith theswitch boxbelow,especiallyprovidedforthis
purpose.

Min
50mm
Min
50mm
6
Create an opening with the dimensions shown in the picture below.
Note: The safety distance between the sides of the hob and the inner surfaces of
the worktop should be at least 3mm. The minimum distance between the hob and
the cupboard above the hob should be at least 650 mm.
Apply the one-sided self-adhesive sealing tape supplied all the way round the
lower edge of the cooking surface along the outer edge of the glass ceramic
panel. Do not stretch it.
Screw the 4 worktop mounting brackets on the side walls of product.

7
Ventilation Requirement
All induction cooktops are fitted with cooling fans that draw fresh air in from the rear of
the unit and expel the warm air through vents at the front.
When installing your cooktop the following ventilation requirements are as follows:
5 mm ventilation cut out below the bench top the width of the cooktop.
10 mm ventilation cut out in the base of the kick plate.
50 mm gap behind the oven or draws.
A minimum gap of 30 mm between the oven and base of the cooktop.
Ventilation gaps should not be obstructed by any drawers, cupboards, etc.
This diagram is a typical example when fitted above an oven or drawers.

8