Blaupunkt Auto Fun PRO 2 User manual

RADIO AM/FM ANTENNA
AUTO FUN PRO 2
Operating and Installation Instructions

CAUTION
Max.
Min.
1.
2.
3.
4.
5.
Temperature
Do not touch the adhesive surface of the carrier paper, the receptor
and the mounting disc after peeling o the protective foil.
The adhesive will stick immediately on contact and cannot be
repositioned.
Ensure mounting points are dry and clean by using windscreen
cleaner or alcohol with the provided Windscreen Cleaning Cloth
to clean the windscreen before installation.
Recommended installation location
The Aerial is not suitable for mounting on metallic-coated heat-
protection windows
OR OR
1

INSTALLATION
1. Mounting Jig & Disc
2. Disc Position
a
b
c
ca.
60mm
ca.
60mm
ca.
60mm
ca.
60
mm
ca.
60mm
ca.
60
mm
2

INSTALLATION
3. Remove Protective Foil from Receptor
4. Connect Receptor
5. Smoothen and trim the excessive Receptor
Receptor
Protective Foil
a
c
b
c c
60mm
60mm
3

OR
INSTALLATION
6. Terminal position 7. Housing position
8. Cover the Aerial
9. Corner ground connection
Terminal Housing
Anti-corrosion grease
4

INSTALLATION
10. Rear-view mirror ground connection
Anti-corrosion grease
5

CONNECTION DIAGRAM
Automatic
Aerial
Terminal
HF Socket
Features :
Adhesive active windscreen antenna for radio reception
•
•
•
•
•
Optimum reception performance thanks to built-in antenna amplier
Frequency range : AM/FM 0.15 – 6.2MHz & 76 – 108MHz
Straight antenna connector
Cable length 2905mm
RG 178 cable
6

Designed and engineered by Blaupunkt