Blaupunkt TravelPilot RGS 05 User manual

TravelPilot RGS 05
TravelPilot
RGS 05
Navigation system
Operating Instructions

TravelPilot RGS 05
Important information for road traffic safety
Operation while driving
As a driver you are solely responsible for your road safety.
Use this equipment only in situations where you keep complete control of your vehicle at all times!
Remember that, at a speed of 50 kph, you travel a distance of almost 14 m within one second.
Route guidance
The route guidance system provides you with driving recommendations only. It is always up to you to take another route.
When leaving the recommended route, the system will automatically calculate a new one leading to the desired destination.
This can either be done immediately or after the system has prompted you twice “Make a U-turn, if possible”. The route
guidance function only provides information for the individual vehicle. The system does not include possible limitations for
trucksorcoaches(e.g.withrespecttomax.permissibleheightorweight).TheTravelPilotprovidesassistanceregardingone-
way streets, pedestrian areas and turning regulations. It is your responsibility to pay attention to the current traffic
situation at all times!

TravelPilot RGS 05
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8

TravelPilot RGS 05
39
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS
Control and display elements of the TravelPilot RGS 05
9Header line
:Input field
;Cursor, press 6and 8to move
The arrows indicate the direction of movement
<Selection field
=Automatic brightness control
>Brightness, press + and – to change
?Contrast, press + and – to change
1Select character, indication of current position when the
vehicle is stationary
2Select character, page-by-page scrolling through lists,
alterzoomrangeformapdisplay,increasevolumeofvoice
outputduringrouteguidance,indicationofcurrentposition
when the vehicle is stationary
3SET Set selected character
4Selectcharacter,repeatvoiceoutput,indicationofcurrent
position when the vehicle is stationary
5Select character, page-by-page scrolling through lists,
alter zoom range for map display, reduce volume of voice
outputduringrouteguidance,indicationofcurrentposition
when the vehicle is stationary
6Cursorup,switchingbetweenrouteguidance/mapdisplay
7ENT Enter key (confirmation)
8Cursordown, switchingbetween routeguidance/map dis-
play

TravelPilot RGS 05
40
Product information
The TravelPilot RGS 05 is an active route guidance system.
AfterhavinginsertedthecorrespondingnavigationCDcontainingthe
area of the current vehicle position and the destination area, you can
use this system in order to be guided to your destination. Discs for
other countries or Merian Scout travel guides are under preparation
or already available.
Thetravelrecommendationsforrouteguidanceareoutputacoustical-
ly and visually.
Using a separate loudspeaker the system provides you with precise
information, for example when having to make a turn.
Thevolumeandtoneofthevoiceoutputcanbecontrolledorswitched
off completely.
On the display you can find the same information offered in a visual
form.Inaddition,thesystemshowsyouthenameofthecurrentlyused
road as well as the current distance to the destination.
If you have missed a turn, the TravelPilot navigator will re-calculate a
new route within a few seconds. Therefore, it is no problem if you
decideto„taketothebackroads“althoughthenavigatorfirstgivesyou
another route recommendation.
The system „knows“one-way streets, pedestrian areas, play streets,
turning regulations etc. and takes them into consideration when
calculating the individual vehicle route.
Scope of delivery
TravelPilot RGS 05
The navigation system comprises a high-performance processing
unit including a CD-ROM disc drive, a remote control, a 5-inch colour
monitor, a magnetic field sensor, two wheel sensors, a shunt for the
rear window defogger, a GPS receiver, a GPS antenna and the
current CD-ROM.
Quick reference
The following four steps are required to start the route guidance
function:
1. Switch on the ignition.
2. Enter your destination via:
City and
Centre or
Street/Junction or
Other local.
3. Start guidance
4. Start to travel following the direction of the arrow.
After the system has completed the route calculation, follow the
driving recommendations provided.

TravelPilot RGS 05
41
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS
Table of contents
Switching on the TravelPilot ....................................................42
Entering the destination ........................................................... 43
Dest. from memory...................................................................... 44
City .............................................................................................. 44
Centre ......................................................................................... 45
Street........................................................................................... 45
Junction....................................................................................... 46
Other local ................................................................................... 46
Non-urban ................................................................................... 46
Store destination ......................................................................... 47
Start guidance ............................................................................. 47
Destination on map ..................................................................... 49
Start route guidance ................................................................. 50
Information displayed on monitor ................................................51
Directional symbols ..................................................................... 51
Map display ................................................................................. 52
Info menu ................................................................................... 54
Location map............................................................................... 54
Destination info............................................................................ 54
Route list ..................................................................................... 55
Autozoom .................................................................................... 55
Destination area .......................................................................... 56
DSC menu (Direct Software Control).......................................57
Destination memory .................................................................... 57
Delete curr. dest. ......................................................................... 59
Enter location .............................................................................. 59
Map info ...................................................................................... 61
Audio ........................................................................................... 62
GPS status .................................................................................. 64
Standby time ............................................................................... 64
Version ........................................................................................ 65
Calibrate...................................................................................... 65
Demo........................................................................................... 65
Example for destination entry ..................................................66
Autonomous route guidance....................................................69
Day/night mode ......................................................................... 69
Demo mode................................................................................ 70
Annex ......................................................................................... 71
CD-ROM ..................................................................................... 71
Calibration ................................................................................... 71
Changing the CD......................................................................... 72
Change of tyres ........................................................................... 72

TravelPilot RGS 05
42
Switching on the TravelPilot
The TravelPilot is activated when you turn on the ignition of your car.
The navigation page selected last will appear on the monitor.
If the monitor shows the map display,
•press ENT to enter into the Nav menu.
Nav menu
The system will either prompt you to enter a destination or show the
destination selected last (destination info).
In the Nav menu you can choose from the following options:
Info menu
Start guidance (after you have entered a destination)
Enter destination
DSC menu

TravelPilot RGS 05
43
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS
Entering the destination
•Use the /keys to move the cursor to Enter destination
and
•confirm with ENT.
Aselectionofthepossiblewaystoenteradestinationappearsonthe
display:
Dest. from memory
Prerequisite: You have stored at least one destination.
City, if your destination does not correspond to the destination
entered last.
Street/Junction, if the destination is in the same city.
Prerequisite: The destination entered last contains a city name.
Other local, if your destination is a city centre or a train station.
Non-urban, if your destination is a motorway exit, motorway
service area, motorway junction or an airport.
Destination on map, if you want to select a destination directly
from the map.

TravelPilot RGS 05
44
Dest. from memory Make sure that you have at least stored
one destination in the destination memo-
ry.
Use the /keys to scroll through the
list page by page.
Select a destination with the cursor keys
/. Use /to move to the left/right
of the selected entry.
Confirm by pressing ENT.
To quit this screen: Move to Enter desti-
nation with the /cursor keys and
confirm with ENT.
City To enter the destination.
The system will display the name of the
destination entered last. Press ENT to
select this destination or proceed as fol-
lows.
Select characters by using the /and
/cursor keys.
Press the SET key to move the first char-
acter to the input line.
In order to find the desired destination
more quickly, you can enter one or more
characters, depending on the individual
place name.
Example:
Xanten –1 character (X)
Münchweiler –6 characters (MÜNCHW)
Press ENT to open the list of cities.

TravelPilot RGS 05
45
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS
Use the /keys to move the cursor to
the desired destination. You can scroll
through the list of cities page by page
using the /keys. Confirm the en-
tered city by pressing the ENT key.
Change city
Use this item to alter a pre-selected city.
Nav menu
To abort the entry and return to the Nav
menu.
Centre When choosing this option, the system
will display a list of all local parts of the
selected city available on the disc.
Street/Junction This menu item will only appear if digi-
tised streets are available for the select-
ed destination city.
Enter the characters by proceeding as
described under City. After having con-
firmed the selected street by pressing the
ENT key, it will be displayed as the desti-
nation under the selected city. If you
have entered the name of a local part of
the city, then the system will nevertheless
provide you with a listing of all streets of
the respective city.
Change street
Use this item to alter a pre-selected
street name.

TravelPilot RGS 05
46
Nav menu
To abort the entry and return to the Nav
menu.
Junction By specifying a junction you can define
your destination more precisely.
This function shows you all streets either
intersecting with or directly connected to
the selected destination street.
Choose the junction coming closest to
your destination and confirm by pressing
the ENT key.
Change junction
Use this item to alter a pre-selected junc-
tion.
Nav menu
To cancel the entry and return to the Nav
menu.
Other local This option shows you other destinations,
such as Centre, Car park or Train
station for quick selection of the desired
destination (if available).
Non-urban Use this option to enter destinations lo-
cated outside of the city limits, such as
Motorway exit, Motorway service,
Motorway junction, Airport or Border
crossing.

TravelPilot RGS 05
47
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS
Under Airport and Border crossing you
can enter regional and international air-
ports as well as border crossings.
Store destination Before starting the route guidance func-
tion, you can store the entered destina-
tion. For this purpose, move the cursor to
the line “Store destination”and press
the ENT key.
You can enter a short name in order to
find the destination more quickly.
If you do not want to record such a name,
press the ENT key.
Now the destination has been stored.
Start guidance After having entered a destination and
activated the route guidance function by
pressing the ENT key, you can start your
trip. The system starts calculating the
route using the road map stored on the
CD. This process may take up to 30 sec-
onds. You will get a message that the
route is currently being calculated. After
that an arrow showing in the direction of
the destination is displayed together with
the message “Calculating route”and
the spoken message “The route is being
calculated”can be heard. In addition, the
straight line distance (as the crow flies) to
the destination is displayed.

TravelPilot RGS 05
48
When driving on a digitised road, you will
be guided to your destination with the
assistance of spoken driving recommen-
dations and direction symbols after the
route calculation pro-cess has been com-
pleted. During the route guidance proc-
ess you can use the /keys to in-
crease or reduce the voice output vol-
ume. Press to repeat the current spo-
ken message. Press the ENT key to dis-
play the destination info for approximate-
ly 4 seconds during the trip. While the
destination info is still being displayed,
press the ENT key once again to switch
to the Nav menu, in order, for example,
to call up the info menu.
If you move your vehicle to a location
which has not been digitised (public park-
ing lot, garage, multi-storey car-park),
then you will see the message “Off
road”. If your vehicle is moved outside of
the digitised network (for example, when
travelling abroad), then the display shows
the message “Off map”.
In these cases you should follow the ar-
row on the display, which points in the
direction of the destination.
When reentering from a non-digitised
road into the digitised network, the
TravelPilot will need a distance of some

TravelPilot RGS 05
49
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS
100 metres travel to be able to output
driving recommendations again.
If you have reached your destination, the
system displays the corresponding mes-
sage and you will hear a voice saying
“You have reached your destination”. Af-
ter the symbol “destination reached”has
disappeared from the display, the system
will only show you the name of the cur-
rently used street or display “Nav menu”
if the vehicle is stationary.
Nav menu Back to the Nav menu.
When returning to the Nav menu the
voice output will be interrupted until the
route guidance function is restarted.
Destination on map When choosing this menu item, a map
orientated to north will appear on the
monitor, showing the destination area
entered last. Using the menu items on
the left side it is easily possible to change
the function of the , , or button.
From top to bottom, the menu items have
the following functions:
1. Destination symbol to the left, right
or up, down
2. Zoom function
Use the or button to select the de-
sired function.

TravelPilot RGS 05
50
Depending on the selected function you
can use the , , or button to move
the destination symbol to the position
to approach next or to change the map
scale with the or button. When mov-
ing the symbol beyond the map limits, the
system will display a new map detail au-
tomatically. Press the ENT key as soon
as you have reached the desired posi-
tion. You can provide this destination with
a short name. Press the ENT key if you
do not wish to enter a short name. The
destination will automatically become the
Destination on map. You can then start
the route guidance function or move the
cursor to the line Enter destination in
order to repeat the entry. Choose the
item Nav menu to abort the destination.
Start route guidance
Start guidance After having activated the navigation
module, the display will show the destina-
tion entered last. If you wish to drive to
that destination, move the cursor to the
line Start guidance using the /keys
and confirm with ENT. If you want to
drive to another destination, move the
cursor to the line Enter destination and
confirm by pressing ENT.

TravelPilot RGS 05
51
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS
Information displayed on the monitor
During route guidance, two basic monitor modes are available:
•Directional symbols (pictograms showing driving recommenda-
tions)
•Map display
Directional symbols
If the map display mode is active, use the or button to switch to
the pictogram mode.
The following information appears on the monitor:
- the directional symbol (centre)
- the remaining distance to the destination (top left corner)
- the remaining travel time (top right)
- the distance to the next turn-off (right to the directional symbol)
- the road currently used or the writing Nav menu, if the vehicle is
stationary (bottom)
Before an intersection or turn-off is reached, the monitor shows:
- for approximately 5 secs. the name of the road to turn into. This
indication will be displayed once again by repeating the voice
output.
- a bar graph decreasing in size the closer the vehicle approach-
es to the turn-off (right to the directional symbol).

TravelPilot RGS 05
52
Map display
If the pictogram mode is active, use the or button to switch to the
map display mode. The map orientation depends on the scale
selected. It is rotated to follow the direction of driving for all scale
values up to 20 km; for all other scales as of 20 km, the map is
orientated towards the destination. Use /to alter the scale.
The following information is shown on the map:
- the calculated route (blinking)
- the current vehicle location and, depending on the selected
scale, also the destination
- the currently used road (bottom)
- the real distance to the destination (top left corner)
- the selected scale (top right corner)
- a menu bar on the left showing the distance to the destination
travel time
driving recommendation
compass
GPS status
direction to the destination
These menu items can be switched on and off in the DSC menu
under Map info.
- for approximately 5 secs. the name of the road to turn into (top).
This indication will be displayed once again by repeating the
voice output.
- a coloured road map

TravelPilot RGS 05
53
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS
The individual road classes are displayed with the following colours:
red = Motorways
yellow = Federal roads
(scale < 100 km)
green = Country roads
(scale < 10 km)
dark green = Major residential roads
(scale < 2 km)
light brown = Residential roads
(scale < 0.2 km)
light brown/dotted = Factory premises, paths
(only scale 0.1 km)
green/dotted = Pedestrian areas
(scale < 0.2 km)

TravelPilot RGS 05
54
Info menu
Info menu
Location map The map showing the current vehicle
location is rotated towards the direc-
tion of driving.
Use the /keys to change the
scale from 100 m to 200 km.
Vehicle is stationary:
Back to the Nav menu with ENT.
During the trip:
By pressing the ENT key the TravelPi-
lot will show the destination info for
approximately 4 seconds.
Back to the Nav menu: Press ENT
key once again while the destination
info is still being displayed. With active
route guidance use the /keys to
switch to the route guidance symbols.
Nav menu Back to the Nav menu.
Only after destination entry and start of route guidance:
During the trip the following menus are constantly updated and the
system provides acoustic route guidance.
Destination info Travel time, distance from the current
position and city name of the destina-
tion.
Quit with Info menu.

TravelPilot RGS 05
55
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS
Route list Listing of all streets from the current
position to the destination. Page
through the list using the / or
/keys. Quit with Info menu.
Autozoom Shows the location , destination
and route using the largest possible
scale.
= current vehicle location
= destination
The map is generally oriented to mag-
netic north. The arrow indicating the
vehicle position shows the current di-
rection of driving using north as its
reference. Use to alter the scale.
Reset to the optimal scale with the
key.
Scale changes made using the
Autozoom function have no effects
on the scale used in the normal map
mode.
Vehicle is stationary:
Back to the Nav menu with ENT.
During the trip:
By pressing the ENT key the TravelPi-
lot will show the destination info for
approximately 4 seconds.
Back to the Nav menu: Press ENT
key once again while the destination
info is still being displayed. With active
route guidance use /keys to
switch to the route guidance symbols.