Blaupunkt FREIBURG 130 User manual

CAR RADIO
FREIBURG 130 1 011 402 112 001
Enjoy it.
Operating and installation instructions

2
1 button
Unlock the detachable control panel
2 MENU button
Short press: Call up/close menu
Long press: Start scan function
3 On/O button
Short press: Switch on car sound system
In operation: Mute car sound system (Mute)
Long press: Switch o car sound system
In the menu: Change menu level
In Fast-Browse mode: Conrm selection
4 Volume control
In the menu: Select menu item, change
setting
In Fast-Browse mode: Select folder and track
5 CD tray
6 Display
7 / button
In the menu: Select menu item, change
setting
Radio mode: Start seek tuning
MP3/WMA mode: Change to next/previous
folder
/ button
In the menu: Change menu level
Radio mode: Adjust the stations
Other operating modes: Track selection
8 button (Eject)
Eject a CD
9 USB socket
: Front AUX-IN socket
; Keys 1 - 6
< Infrared receiver
= SRC button
Select memory bank or audio source
> DIS button
Short press: Switch display
Long press: Switch display brightness
Controls
3 74 5 62 81
10 91314 12 11

3
Contents
Safety notes ...................................................... 4
Symbols used.............................................................. 4
Road safety .................................................................. 4
General safety notes................................................. 4
Declaration of conformity ...................................... 5
Cleaning notes.................................................. 5
Disposal notes................................................... 5
Scope of delivery .............................................. 5
Optional equipment
(not part of the scope of delivery)....................... 5
Placing the device in operation....................... 5
Attaching/detaching the control panel ............ 5
Setting the reception area ..................................... 6
Switching on/o ........................................................ 6
Volume .......................................................................... 6
Display brightness..................................................... 6
Switching demo mode on/o............................... 7
Trac information............................................ 7
Radio mode ....................................................... 7
RDS.................................................................................. 7
Changing to radio mode or selecting
a memory bank .......................................................... 7
Tuning into a station ................................................ 8
Storing stations or calling stored stations........ 8
Scanning stations...................................................... 8
Storing stations automatically (Travelstore).... 8
PTY.................................................................................. 9
Switching display....................................................... 9
CD/MP3/WMA mode....................................... 10
Basic information.....................................................10
Changing to CD/MP3/WMA mode....................10
Inserting/ejecting a CD .........................................10
Connecting/removing a USB data carrier.......11
Selecting tracks ........................................................11
Selecting a folder
(only in MP3/WMA mode)....................................11
Fast searching...........................................................11
Interrupting playback............................................11
Scanning all tracks ..................................................11
Playing tracks in random order ..........................12
Repeatedly playing individual tracks or
directories ..................................................................12
Switching display.....................................................12
Browse mode ............................................................12
External audio sources................................... 13
Front AUX-IN socket................................................13
Sound settings................................................ 13
Calling and exiting the "AUDIO" menu............14
Making settings in the "AUDIO" menu.............14
User settings ................................................... 15
Calling the user menu and selecting
a menu.........................................................................15
Making settings in the "TUNER" menu ............15
Making settings in the "DISPLAY" menu.........16
Making settings in the "VOLUME" menu ........17
Making settings in the "CLOCK" menu ............17
Making settings in the "VARIOUS" menu........18
Factory settings .............................................. 19
Useful information ......................................... 19
Warranty .....................................................................19
Service.........................................................................19
Technical data ................................................. 20
Installation instructions ................................ 21

4
Safety notes
The car sound system was manufactured accord-
ing to the state of the art and established safety
guidelines. Even so, dangers may occur if you do
not observe the safety notes in these instructions.
These instructions contain important informa-
tion to easily and safely install and operate the car
sound system.
• Read these instructions carefully and com-
pletely before using the car sound system.
• Keep the instructions at a location so that they
are always accessible to all users.
• Always pass on the car sound system to third
parties together with these instructions.
In addition, observe the instructions of the devices
used in conjunction with this car sound system.
Symbols used
These instructions employ the following symbols:
DANGER!
Warns about injuries
CAUTION!
Warns about damaging the CD drive
DANGER!
Warns about high volume
The CE mark conrms the compliance
with EU directives.
쏅Identies a sequencing step
• Identies a listing
Road safety
Observe the following notes about road safety:
• Use your device in such a way that you can
always safely control your vehicle. In case of
doubt, stop at a suitable location and operate
your device while the vehicle is standing.
• Remove or attach the control panel only
while the vehicle is standing.
• Always listen at a moderate volume to pro-
tect your hearing and to be able to hear acous-
tic warning signals (e.g. police sirens). During
mute phases (e.g. when changing the audio
source), changing the volume is not audible.
Do not increase the volume during this mute
phase.
General safety notes
Observe the following notes to protect yourself
against injuries:
• Do not modify or open the device. The device
contains a Class 1 laser that can cause injuries
to your eyes.
• Do not increase the volume during mute
phases, e.g. when changing the audio source.
Changing the volume is not audible during a
mute phase.
Use as directed
This car sound system is intended for installation
and operation in a vehicle with 12 V vehicle sys-
tem voltage and must be installed in a DIN slot.
Observe the performance limits in the technical
data. Repairs and installation, if necessary, should
be performed by a specialist.
Installation instructions
You may only install the car sound system your-
self if you are experienced in installing car sound
systems and are very familiar with the electrical
system of the vehicle. For this purpose, observe
the installation instructions at the end of these
instructions.
Safety notes

5
Safety notes | Cleaning notes | Disposal notes | Scope of delivery | Placing the device in operation
Declaration of conformity
The Blaupunkt Europe GmbH declares that the
car sound system complies with the basic require-
ments and the other relevant regulations of the
directive 2004/108/EC.
The declaration of conformity can be found on the
Internet under www.blaupunkt.com.
Cleaning notes
Solvents, cleaning and scouring agents as well as
dashboard spray and plastics care product may
contain ingredients that will damage the surface
of the car sound system.
• Use only a dry or slightly moistened cloth for
cleaning the car sound system.
• If necessary, clean the contacts of the control
panel regularly using a soft cloth moistened
with cleaning alcohol.
Disposal notes
Do not dispose of your old unit in the house-
hold trash!
Use the return and collection systems available to
dispose of the old device.
Scope of delivery
The scope of delivery includes:
1 Car sound system
1 Operating/installation instructions
1 Case for the control panel
1 Support frame
1 Antenna connection adapter
2 Disassembly tools
1 Spacer screw
1 Plastic cap
1 Handheld remote control (incl. battery)
Optional equipment
(not part of the scope of delivery)
Use only accessories approved by Blaupunkt.
Information is available from your Blaupunkt
specialised dealer or on the Internet under
www.blaupunkt.com.
Placing the device in operation
Attention
Transport securing screws
Before the startup of the car sound system, ensure
that the transport securing screws are removed
(see the chapter "Installation instructions").
Attaching/detaching the control
panel
The car sound system is equipped with a detach-
able control panel (release panel) to protect your
equipment against theft. In the delivery state,
the control panel is in the supplied case. To start
operating the radio after installation, you must
rst attach the control panel (see the section
"Attaching the control panel" in this chapter).
Always take the control panel with you when leav-
ing the vehicle. The car sound system is worthless
to a thief without this control panel.
Caution
Damage to the control panel
Never drop the control panel.
Transport the control panel so that it is protected
against impacts and the contacts cannot become
dirty.
Do not expose the control panel to direct sunlight
or another heat source.
Avoid direct skin contact with the control panel
' s
electrical contacts.

6
Placing the device in operation
Attaching the control panel
쏅Push the control panel into the bracket at the
right edge of the device.
쏅Push the control panel carefully into the left
bracket until it clicks into place.
Removing the control panel
쏅Press the button
1 to unlock the control
panel.
The left side of the control panel detaches
from the device and is secured by the bracket
against falling out.
쏅Move the control panel slightly to the left
until it disengages from the right bracket.
쏅Carefully remove the control panel from the
left bracket.
Note:
The car sound system automatically switches
o as soon as the control panel is removed.
Setting the reception area
This car sound system is designed for operation in
dierent regions with dierent frequency ranges
and station technologies. The factory default of
the reception area is "EUROPE". In addition, the
reception areas "ASIA", "USA", "S-AMERICA" and
"THAILAND" are available.
Note:
If you operate the car sound system outside of
Europe, you may rst have to set a suitable re-
ception area in the user menu (see the chap-
ter "User settings", section "Making settings in
the "TUNER" menu", menu item "AREA").
Switching on/o
Switching on/o with the On/O button
쏅For switch-on, press the On/O button
3 .
The car sound system switches on.
쏅To switch o the device, press and hold down
the On/O button
3 for longer than 2 sec-
onds.
The car sound system switches o.
Note:
If you switch on the car sound system while
the vehicle ignition is switched o, it auto-
matically switches o after 1 hour to preserve
the vehicle battery.
Switching on/o via vehicle ignition
The car sound system will switch o/on simulta-
neously with the ignition if the device is correctly
connected to the vehicle
' s ignition as shown in the
installation instructions and you did not switch
the device o by pressing the On/O button 3 .
Volume
Adjusting the volume
You can adjust the volume in steps from 0 (o) to
50 (maximum).
쏅Turn the volume control 4 to change the
volume.
Note:
If a telephone is connected with the car sound
system as described in the installation instruc-
tions, the car sound system is muted in case
of a phone call. During muting, the display
shows "TELEPHONE".
Muting the car sound system (Mute)
쏅Briey press the On/O button
3 to mute
the car sound system or to reactivate the pre-
vious volume.
During muting, the display shows "MUTE".
Display brightness
You can manually switch the display brightness
between daytime mode and night-time mode or
switch automatically with the driving lights of the
vehicle.
Notes:
• The manual or automatic switching of the
display brightness is selected in the user
menu (see the chapter "User settings",
section "Making settings in the "DISPLAY"
menu", menu item "DIM MODE").

7
Placing the device in operation | Trac information | Radio mode
• The display brightness can be adjusted
separately for day and night (see the chap-
ter "User settings", section "Making set-
tings in the "DISPLAY" menu", menu items
"DIM DAY" and "DIM NIGHT".
쏅Press the DIS button
> for approx. 2 seconds
to manually switch the display brightness.
Switching demo mode on/o
The demo mode shows the functions of the car
sound system as scrolling text on the display. By
pressing any button, the demo mode is interrupt-
ed and you can operate the device.
The demo mode can be switched on and o in the
user menu (see the chapter "User settings", section
"Making settings in the "VARIOUS" menu", menu
item "DEMO MODE").
Trac information
In the reception area "EUROPE", an FM station can
identify trac reports by means of an RDS signal.
If priority for trac reports is switched on, a traf-
c report is automatically switched through, even
if the car sound system is currently not in radio
mode.
If priority is switched on, the display shows the
trac jam symbol ( ). "TRAFFIC" is displayed
during a switched-through trac announcement.
The priority is activated and deactivated in the
user menu (see the chapter "User settings", sec-
tion "Making settings in the "TUNER" menu", menu
item "TRAFFIC").
Notes:
• The volume is increased for the duration
of the switched-through trac announce-
ment.You can adjust the minimum volume
for trac announcements (see the chapter
"User settings", section "Making settings
in the "VOLUME" menu", menu item "TA
VOLUME").
• To cancel a switched-through trac an-
nouncement, press the SRC button
= .
Radio mode
RDS
Many FM stations broadcast an RDS (Radio Data
System) signal in addition to their programme
in the reception area "EUROPE" that allows the
following additional functions:
• The station name is shown on the display.
• The car sound system recognises trac an-
nouncements and news broadcasts and can
automatically switch them through in other
operating modes (e.g. in CD mode).
• Alternate frequency: If RDS is activated, the car
sound system automatically selects the best
receivable frequency for the station that is cur-
rently set.
• Regional: At certain times, some radio sta-
tions divide their programme into regional
programmes providing dierent content. If
the REGIONAL function is activated, the car
sound system changes only to those alternate
frequencies on which the same regional pro-
gramme is being broadcast.
The functions RDS and REGIONAL are activated
and deactivated in the user menu (see the chap-
ter "User settings", section "Making settings in
the "TUNER" menu", menu items "RDS AF" and
"REGIONAL").
Changing to radio mode or selecting
a memory bank
쏅Press the SRC button = repeatedly until the
desired memory bank is displayed:
FM1 씮FM2 씮FMT 씮AM 씮AMT
Notes:
• Up to 6 stations can be stored in each
memory bank.
• Memory banks can be activated or deacti-
vated via the user menu (see the chapter
"User settings", section "Making settings in
the "TUNER" menu", menu item "BANDS"
(band selection)). Deactivated memory
banks are skipped during the source selec-
tion with the SRC button
=

8
Radio mode
Tuning into a station
There are various ways of tuning into a station:
Tuning into stations manually
쏅Briey press the / button
7 once or
several times to change the frequency in in-
crements, or long to quickly change the fre-
quency.
Starting station seek tuning
쏅Press the / button
7 to start station
seek tuning.
The radio tunes into the next receivable
station.
Notes:
• For the reception area "EUROPE": In the FM
waveband, only trac information stations
are tuned into if the priority for trac infor-
mation ( ) is switched on.
• For the reception areas "EUROPE" and
"USA": In the FM waveband, the next
station with the currently selected pro-
gramme type is tuned into if the PTY func-
tion is activated (see the chapter "PTY").
• The sensitivity of seek tuning can be ad-
justed (see the chapter "User settings",
section "Making settings in the "TUNER"
menu", menu item "SEEK SENS").
Storing stations or calling stored
stations
쏅Select the desired memory bank.
쏅If necessary, set the desired station.
쏅Press the station button 1 - 6
; for approx.
2 seconds to store the current station under
the button.
- or -
쏅Briey press the station button 1 - 6
; to call
up the stored station.
Scanning stations
With the scan function, you can scan either every
receivable station or the stored stations of the cur-
rent waveband.
Note:
You can adjust the scan time for each sta-
tion (see the chapter "User settings", section
"Making settings in the "VARIOUS" menu",
menu item "SCAN TIME").
Scanning receivable stations
쏅Press the MENU button
2 for approx. 2 sec-
onds to start scanning.
During the scan, the display alternately dis-
plays "SCAN" and the current frequency as
well as memory bank or station name.
쏅Briey press the MENU button
2 to con-
tinue listening to the station that is currently
being received.
Scanning stored stations
쏅Press the / button 7 for approx. 2 sec-
onds to start scanning.
During the scan, the display shows the mem-
ory location and the current frequency or sta-
tion name.
쏅Briey press the / button
7 to continue
listening to the station that is currently being
scanned.
Storing stations automatically
(Travelstore)
With Travelstore, you can automatically search
for and store the 6 stations oering the strongest
reception in the region in the FM and AM wave-
bands. The stations are stored in the FMT or AMT
memory bank. Any previously stored stations in
this memory bank are deleted in the process.
쏅Select a memory bank of the desired wave-
band, e.g. FM1 or AM.
쏅Press the SRC button
= for approx. 2 sec-
onds.

9
Radio mode
The tuner starts the automatic station seek
tuning; the display shows "FM TSTORE" or
"AM TSTORE". After the storing is completed,
the radio plays the station at memory location
1 of the FMT or AMT level.
Notes:
• For the reception area "EUROPE": If the
priority for trac information is switched
on ( ), only trac information stations
are stored.
• If the FMT or AMT memory bank is deac-
tivated (see the chapter "User settings",
section "Making settings in the "TUNER"
menu", menu item "BANDS"), it is auto-
matically reactivated if you initiate the
Travelstore function.
PTY
In the reception areas "EUROPE" and "USA", an
FM station can transmit its current programme
type, e.g. CULTURE, POP, JAZZ, ROCK, SPORT or
SCIENCE. Hence, the PTY function allows a target-
ed search for broadcasts of a certain programme
type, e.g. for rock or sports broadcasts. Note that
PTY is not supported by all stations.
Note:
The PTY function is only available if it has been
activated (see the chapter "User settings", sec-
tion "Making settings in the "TUNER" menu",
menu item "PTY").
Selecting a programme type
To select a programme type. read the section
"Making settings in the "TUNER" menu", menu
item "PTY TYPE" in the chapter "User settings".
Note:
You can set the language in which the pro-
gramme types should be displayed (see the
chapter "User settings", section "Making set-
tings in the "TUNER" menu", menu item "PTY
LANG").
Searching for stations
쏅Press the / button
7 .
During the seek tuning, the currently selected
programme type is shown on the display.
As soon as a station with the desired pro-
gramme type is found, it remains being tuned
into.
Notes:
• If no station with the selected programme
type is found, "PTY NONE" is briey dis-
played and 2 beeps can be heard. The
radio will then retune to the station that it
played last.
• If the tuned radio station or another sta-
tion on the broadcasting network broad-
casts your selected programme type at a
later point in time, the car sound system
will automatically switch from the cur-
rently tuned station or from the current
audio source (e. g. CD) to the station whose
programme type matches the one you se-
lected. Note that this function is not sup-
ported by all stations.
Switching display
쏅Press the DIS button > to toggle between
these displays:
Display Meaning
ABCDEF Station name
FM1 102.90
or
P1 102.90
Memory bank/frequency
or
Memory location/frequency
FM1 18:30
or
P1 18:30
Memory bank/time
or
Memory location/time

10
CD/MP3/WMA mode
CD/MP3/WMA mode
Basic information
This car sound system can be used to play audio
CDs (CDDA) and CD-R/RWs with audio, MP3 or
WMA les as well as MP3 or WMA les on USB data
carriers.
Notes:
• To ensure proper functioning, use only CDs
with the Compact-Disc logo.
• Blaupunkt cannot guarantee the awless
function of copy-protected CDs and all CD
blanks and USB data carriers available on
the market.
Note the following information when preparing
an MP3/WMA data carrier:
• Naming of tracks and directories:
– Max. 32 characters without the le exten-
sion ".mp3" or ".wma" (the use of more
characters reduces the number of tracks
and folders that the car sound system can
recognise)
– No umlauts or special characters
• CD formats: CD-R/RW, Ø: 12 cm
• CD data formats: ISO 9669 Level 1 and 2, Joliet
• CD burn speed: Max. 16x (recommended)
• USB format/le system: Mass storage device /
FAT16/32
• File extension of audio les:
– .MP3 for MP3 les
– .WMA for WMA les
•WMAles only without Digital Rights Manage-
ment (DRM) and created with Windows Media
Player version 8 or later
• MP3 ID3 tags: Version 1 and 2
• Bitrate for creating audio les:
– MP3: 32 to 320 kbps
– WMA: 32 to 192 kbps
• Depending on the data structure on the USB
medium, up to 20,000 entries can be managed.
Changing to CD/MP3/WMA mode
쏅Press the SRC button = repeatedly until the
desired audio source is displayed:
• "CD": Inserted CD
• "USB": Connected USB data carrier
• "AUX": Connected external audio source
Notes:
• The respective audio source can be select-
ed only if a corresponding CD is inserted or
a corresponding device is connected.
• If the car sound system rst has to read
the data of a connected device or data car-
rier before the playback, the display shows
"READING". The duration of the reading
depends on the data volume and design of
the device or data carrier. If the device or
data carrier is defective or the transferred
data cannot be played back, a correspond-
ing message appears on the display (e.g.
"USB ERROR").
Inserting/ejecting a CD
Inserting a CD
Risk of severe damage to the CD
drive!
Noncircular contoured CDs (shape CDs)
and CDs with a diameter of 8 cm (mini CDs) must
not be used.
We accept no responsibility for any damage to the
CD drive that may occur as a result of the use of
unsuitable CDs.
Note:
You must not hinder or assist the drive as it
automatically draws in the CD.
쏅Insert the CD with its printed side up into the
CD tray 5 until you feel a slight resistance.
The drive automatically draws in the CD and
checks its data. Afterwards, the playback
starts in CD or MP3 mode.

11
Note:
If the inserted CD cannot be played back, "CD
ERROR" is briey displayed and the CD is au-
tomatically ejected after approx. 2 seconds.
Ejecting a CD
Note:
You must not hinder or assist the drive as it
ejects the CD.
쏅Press the button
8 to eject an inserted
CD.
Notes:
• If a CD is ejected and not removed, the
drive will automatically draw it back in
again after approx. 10 seconds.
• You can also eject CDs while the car sound
system is switched o or whilst another au-
dio source is activated.
Connecting/removing a USB data
carrier
Connecting a USB data carrier
쏅Switch o the car sound system so that the
data carrier will be correctly registered.
쏅Pull the protective cap of the USB socket 9
to the front until it moves out of the socket
and fold it down.
쏅Connect the USB data carrier.
쏅Turn on the car sound system.
If the USB data carrier is initially selected as
audio source, the data are read rst.
Notes:
• If the connected USB data carrier cannot
be seen, "USB ERROR" is briey displayed.
• The time required for reading in the data
depends on the design and size of the USB
data carrier.
Removing a USB data carrier
쏅Switch o the car sound system so that the
data carrier will be correctly unregistered.
쏅Disconnect the USB data carrier.
쏅Close the protective cap of the USB socket
9 .
Selecting tracks
쏅Press the / button 7 briey to change
to the previous/next track.
Note:
If the current track plays longer than 3 sec-
onds, pressing
7 once restarts the track.
Selecting a folder
(only in MP3/WMA mode)
쏅Press the / button 7 briey to change
to the previous/next folder.
Fast searching
쏅Press and hold down the / button 7
until the desired position has been reached.
Interrupting playback
쏅Press the 2button ; to interrupt the
playback ("PAUSE") or to continue it.
Scanning all tracks
The scan function scans all available tracks.
쏅Press the MENU button
2 for approx. 2 sec-
onds to start the scan, or briey to continue
playing the currently scanned track.
Note:
The scan time can be adjusted (see the chap-
ter "User settings", section "Making settings
in the "VARIOUS" menu", menu item "SCAN
TIME").
CD/MP3/WMA mode

12
Playing tracks in random order
쏅Press the 4 MIX button ; to change among
the playback modes:
Operation Display Meaning
CD MIX ALL Mixing tracks
MP3/
WMA
MIX DIR Mixing tracks of
the current folder
MIX ALL Mixing tracks of
the data carrier
Gen. MIX OFF Regular playback
If the MIX function is switched on, the icon
MIX (mix all tracks) or MIX (mix tracks of
current folder) is shown on the display.
Repeatedly playing individual tracks
or directories
쏅Press the 3 RPT button ; to change among
the playback modes:
Operation Display Meaning
CD RPT TRACK Repeating tracks
MP3/
WMA
RPT TRACK Repeating tracks
RPT DIR Repeating
folders
Gen. RPT OFF Regular playback
If the RPT function is switched on, the icon
(repeat tracks) or (repeat
folders) is shown on the display.
Switching display
쏅Press the DIS button > once or several times
to switch among these displays:
Opera-
tion
Display Meaning
CD
T01 00:15 Track number
and playing time
T01 03:37 Track number
and duration
T01 18:30 Track number
and time
MP3/
WMA
FILE File name
FOLDER Folder name
SONG Track name*
ARTIST Artist*
ALBUM Album name*
PLAY 00:15 Playing time
TOTAL03:37 Track duration
CLOCK18:30 Time
ALL INFO All information
as scrolling text
* Track name, artist and album name must be
stored as ID3 tag to be able to display them.
Browse mode
In Browse mode, you can directly search for and
select a certain track on the MP3/WMA data carrier
without interrupting the current playback.
Calling the browse mode
쏅Press the 1 button
; to call up the browse
mode.
The icon ashes on the display. In addition,
the icon (folder) or icon (track) appears.
The rst or current folder on the data carrier is
being displayed.
CD/MP3/WMA mode

13
Notes:
• The rst folder is displayed only if the
browse mode has been called for the rst
time after inserting or connecting the data
carrier. Afterwards, the current folder is
displayed whenever the browse mode is
called.
• You can exit the browse mode at any time
by pressing the 1 button
; .
쏅Press the / button
7 once or several
times or hold the button pressed to select a
dierent folder.
쏅Press the button
7 to display the tracks of
the selected folder.
The rst track of the folder is shown on the
display.
Note:
Pressing the button 7 returns you to the
folder list.
쏅Press the / button
7 once or several
times or hold the button pressed to select a
dierent track.
쏅Press the button
7 to play the track.
The playback starts. You are exiting the
browse mode.
Fast browsing
Fast browsing enables faster access to tracks. In-
stead of the arrow keys
7 , you use the volume
control 4 and the On/O button 3 to select
and conrm list entries:
Function Browse
mode
Fast browse
mode
Selecting
entries in lists /
7
Volume
control 4
Conrming
entries
7
On/o
button 3
Return to the
higher level
7 7
Fast browsing is switched on or o in the user
menu (see the chapter "User settings", section
"Making settings in the "VARIOUS" menu", menu
item "BROWSE").
Note:
With activated fast browsing, you cannot
change the volume in browse mode or mute
the car sound system. To do so, rst exit the
browse mode by pressing the button 1
;
or starting the track playback.
External audio sources
Front AUX-IN socket
Danger!
Increased risk of injury from
connector.
In case of an accident, the protruding connector
in the front AUX-IN socket may cause injuries. The
use of straight plugs or adapters leads to an in-
creased risk of injury.
For this reason, it is recommended to use angled
jack plugs.
As soon as an external audio source, such as a
portable MP3 player is connected to the front
AUX-IN socket
: , it can be selected with the SRC
button = . "AUX" then appears on the display.
Sound settings
The following sound settings can be changed in
the "AUDIO" menu:
• Adjusting bass and treble
• Setting the left/right volume distribution
(Balance) or front/rear (Fader)
• Adjusting the increase of bass at low volume
(X-Bass)
• Selecting a sound prole (Presets)
• Adjusting the time delay for switching in an
external amplier
CD/MP3/WMA mode | External audio sources | Sound settings

14
Calling and exiting the "AUDIO"
menu
쏅Briey press the MENU 2 button to open
the user menu.
쏅Turn the volume control
4 until the "AUDIO"
menu item is selected.
쏅Press the On/O button
3 to open the
"AUDIO" menu.
쏅Turn the volume control
4 until the desired
menu item is selected.
쏅Perform the setting (see the next section).
쏅Briey press the MENU button
2 to exit the
menu.
Notes:
• The menu is automatically exited approx.
16 seconds after the last button activation
and you are returned to the display of the
current audio source.
• In the menu, you can press the button
7 in each case to return to the higher
menu level.
• The menu does not allow changing the
volume or muting (Mute) the car sound
system.
Making settings in the "AUDIO"
menu
BASS
Bass level. Settings: –7 to +7.
쏅Press the On/O button 3 to change the
setting.
쏅Turn the volume control
4 until the desired
level is set.
TREBLE
Treble. Settings: –7 to +7.
쏅Press the On/O button
3 to change the
setting.
쏅Turn the volume control
4 until the desired
level is set.
BALANCE
Left/right volume distribution. Settings: L9 (left)
to R9 (right).
쏅Press the On/O button
3 to change the
setting.
쏅Turn the volume control
4 until the desired
volume distribution is set.
FADER
Front/rear volume distribution. Settings: R9 (rear)
to F9 (front).
쏅Press the On/O button
3 to change the
setting.
쏅Turn the volume control
4 until the desired
volume distribution is set.
X-BASS
Increase of bass at low volume. Settings: ON, OFF.
쏅Press the On/O button
3 to change the
setting.
쏅Turn the volume control
4 to change be-
tween the settings.
PRESETS
Selecting equalizer presettings. Settings: POP,
ROCK, CLASSIC, EQ OFF.
쏅Press the On/O button
3 to change the
setting.
쏅Turn the volume control
4 to change be-
tween the settings.
AMP DELAY
Setting the delay with which a connect amplier
is switched in. Settings: 0.5/1.0/1.5/2.0/2.5 seconds
and OFF (no delay).
쏅Press the On/O button
3 to change the
setting.
쏅Turn the volume control
4 until the desired
delay is set.
Sound settings

15
User settings
User settings
Calling the user menu and selecting
a menu
쏅Briey press the MENU 2 button to open
the user menu.
In the user menu, the user settings can be found in
the following menus:
• TUNER
• AUDIO (see chapter "Sound settings")
• DISPLAY
• VOLUME
• CLOCK
• VARIOUS
쏅Turn the volume control
4 until the desired
menu is selected.
쏅Press the On/O button
3 to open the
selected menu.
쏅Turn the volume control
4 until the desired
menu item is selected.
쏅Perform the setting (see the following sec-
tions).
쏅Briey press the MENU button
2 to exit the
menu.
Notes:
• The menu is automatically exited approx.
16 seconds after the last button activation
and you are returned to the display of the
current audio source.
• In the menu, you can press the button
7 in each case to return to the higher
menu level.
• The menu does not allow changing the
volume or muting (Mute) the car sound
system.
Making settings in the "TUNER"
menu
TRAFFIC (trac information)
(only for reception area EUROPE)
Only possible in FM radio mode: Switching prior-
ity for trac announcements on or o. Settings:
ON, OFF.
쏅Press the On/O button
3 to change the
setting.
쏅Turn the volume control
4 to change be-
tween the settings.
If priority is switched on for trac information, the
display shows the icon .
BANDS (band selection)
Activating or deactivating memory banks. Mem-
ory banks that can be deactivated: FM2, FMT, AM,
AMT.
쏅Press the On/O button
3 to open the
menu.
쏅Turn the volume control
4 until the desired
memory bank is displayed.
쏅Press the On/O button
3 to change the
setting.
쏅Turn the volume control
4 to toggle be-
tween the settings ON (activate memory
bank) and OFF (deactivate memory bank).
Deactivated memory banks are skipped during
the source selection with the SRC button
= .
Note:
If a memory bank is deactivated, the stations
stored in this memory bank are retained.
REGIONAL
(only for reception area EUROPE)
Only possible in FM radio mode: Switching
REGIONAL function on or o. Settings: ON, OFF.
쏅Press the On/O button 3 to change the
setting.
쏅Turn the volume control
4 to change be-
tween the settings.

16
SEEK SENS
Setting the sensitivity of station seek tuning. Set-
tings: LOW, HIGH.
쏅Press the On/O button 3 to change the
setting.
쏅Turn the volume control
4 to change be-
tween the settings.
RDS AF
Switching the RDS function on or o. Settings: ON,
OFF.
쏅Press the On/O button
3 to change the
setting.
쏅Turn the volume control
4 to change be-
tween the settings.
Note:
If thereceptionarea"ASIA", "USA","S-AMERICA"
or "THAILAND" is selected, RDS is automati-
cally switched o. The station name continues
to be shown on the display.
PTY
(only for reception areas EUROPE and USA)
Switching the PTY function on or o. Settings: ON,
OFF.
쏅Press the On/O button
3 to change the
setting.
쏅Turn the volume control
4 to change be-
tween the settings.
PTY TYPE
Only possible with activated PTY function: Select
a programme type.
쏅Press the On/O button
3 to change the
setting.
쏅Turn the volume control
4 to select a pro-
gramme type.
PTY LANG
Only possible with activated PTY function: Select
the language for the display of the programme
types. Settings: ENGLISH, DEUTSCH (German),
FRANCAIS (French).
쏅Press the On/O button
3 to change the
setting.
쏅Turn the volume control
4 to select a lan-
guage.
AREA (reception area)
Select the reception area for the radio reception.
Settings: EUROPE, ASIA, USA, S-AMERICA, THAI-
LAND.
쏅Press the On/O button
3 to open the
menu.
쏅Turn the volume control
4 to change be-
tween the reception areas.
쏅Press the On/O button
3 to select a recep-
tion area.
The display shows "PRESS > TO CONFIRM".
쏅Press the button
7 to conrm the
selected reception area.
Making settings in the "DISPLAY"
menu
DIM MODE
Select automatic or manual switching of the dis-
play brightness for day or night. Settings: AUTO
(display brightness is automatically switched by
switching the driving lights on or o), MAN (dis-
play brightness can be switched manually).
쏅Press the On/O button 3 to change the
setting.
쏅Turn the volume control
4 to change be-
tween the settings.
Automatic switching of the display brightness is
possible only If your car sound system is installed
as described in the installation instructions and
your vehicle features the corresponding connec-
tion.
User settings

17
DIM DAY/DIM NIGHT
Setting the display brightness for the day (DIM
DAY) or the night (DIM NIGHT). Settings: 1 – 16.
쏅Press the On/O button 3 to change the
setting.
쏅Turn the volume control
4 to set the desired
display brightness.
SCROLL
Select the display of scrolling text (e.g. when
displaying MP3 le names) either as single display
or continued display. Settings: 1X (single display),
ON (continued display).
쏅Press the On/O button
3 to change the
setting.
쏅Turn the volume control
4 to change be-
tween the settings.
Making settings in the "VOLUME"
menu
ON VOLUME
Setting the power-on volume. Settings: 1 – 50.
쏅Press the On/O button
3 to change the
setting.
쏅Turn the volume control
4 to set the desired
power-on volume.
LAST VOL
If you select the setting LAST VOL, every time you
switch on the radio, the volume level that was set
the last time you switched the radio o is activated
again. Settings: ON, OFF.
Danger!
High volume
The power-on volume can be unex-
pectedly high if the LAST VOL setting is selected
and a high volume was set the last time the radio
was switched o.
Always set the device to a moderate volume.
쏅Press the On/O button
3 to change the
setting.
쏅Turn the volume control
4 to change be-
tween the settings.
TA VOLUME (trac announcement volume)
(only for reception area EUROPE)
Setting the minimum volume for trac announce-
ments. Settings: 1 – 50.
쏅Press the On/O button
3 to change the
setting.
쏅Turn the volume control
4 to set the volume.
BEEP
Switching the conrmation beep on or o. Set-
tings: ON, OFF.
Note:
When storing radio stations, a conrma-
tion beep sounds even if the OFF setting is
selected.
쏅Press the On/O button
3 to change the
setting.
쏅Turn the volume control
4 to change be-
tween the settings.
Making settings in the "CLOCK"
menu
CLK DISP
Switch the permanent display of the time on or o.
Settings: ON, OFF.
쏅Press the On/O button 3 to change the
setting.
쏅Turn the volume control
4 to change be-
tween the settings.
If the permanent display of the time is switched
on, the time is shown on the display. The display
of the respective audio source is shown only after
pressing a button. Approximately 16 seconds after
the button is pressed last, the time is displayed
again.
User settings

18
HOUR MODE
Selecting the 12 or 24-hour time. Settings: 12, 24.
쏅Press the On/O button 3 to change the
setting.
쏅Turn the volume control
4 to change be-
tween the settings.
SET CLOCK
Setting the time.
쏅Press the On/O button
3 to change the
setting.
쏅Turn the volume control
4 counterclockwise
to set the hours.
쏅Turn the volume control
4 clockwise to set
the minutes.
Note:
When you set the time in 12-hour mode
(MODE 12H), an "A" is displayed before the
time for the time before noon or a "P" for the
time after noon.
RDS CLOCK (automatic time setting)
(only for reception area EUROPE)
Switching automatic clock setting with clock data
transmitted via RDS on or o. Settings: ON, OFF.
Note:
The time set with the clock data may not be
correct, even if an RDS station is being re-
ceived.
쏅Press the On/O button
3 to change the
setting.
쏅Turn the volume control
4 to change be-
tween the settings.
Making settings in the "VARIOUS"
menu
DEMO MODE
Switching the demo mode on or o. Settings:
ON, OFF.
쏅Press the On/O button 3 to change the
setting.
쏅Turn the volume control
4 to change be-
tween the settings.
In demo mode, the features of the radio are shown
as scrolling text on the display.
BROWSE
Switching fast track selection in browse mode on
or o using the volume control
4 and the On/O
button 3 . Settings: ON, OFF.
쏅Press the On/O button
3 to change the
setting.
쏅Turn the volume control
4 to change be-
tween the settings.
SCAN TIME
Setting the scan time in seconds. Settings:
4/8/12/16/60 seconds.
쏅Press the On/O button
3 to change the
setting.
쏅Turn the volume control
4 to change be-
tween the settings.
SWC (Steering Wheel Control conguration)
Conguring the buttons of a connected steering
wheel control.
쏅Press the On/O button
3 to open the
menu.
쏅Turn the volume control
4 to change be-
tween the functions.
쏅Press the On/O button
3 to select a func-
tion.
쏅Press the corresponding button on the steer-
ing wheel control for approx. 1 second to pro-
gram the button with the selected function.
VERSION
Displaying the version of the CPU and software of
the radio.
쏅Press the On/O button
3 to open the
menu.
쏅Turn the volume control
4 to toggle be-
tween the display of the version number of
CPU (P) and software (E).
User settings

19
User settings | Factory settings | Useful information
NORMSET
Restoring the original factory settings of the car
sound system.
쏅Press the On/O button 3 .
The display shows "PRESS > TO CONFIRM".
쏅Press the button
7 to conrm the reset-
ting.
The car sound system switches o and is re-
set to the factory settings. If a CD has been
inserted in the CD drive, the car sound system
automatically switches on again.
Factory settings
Important factory settings in the user menu:
Menu item Factory setting
AREA EUROPE
FM2 / FMT / AM / AMT ON
RDS AF* ON
REGIONAL* OFF
TRAFFIC* OFF
SEEK SENS HIGH
PTY** OFF
ON VOLUME 20
TA VOLUME* 20
BEEP ON
BROWSE ON
SCAN TIME 8
DIM MODE MAN
HOUR MODE 24
SET CLOCK 00:00
* Only in reception area "EUROPE"
** Only in reception areas "EUROPE" and "USA"
In the user menu, you can restore the original
factory settings of the car sound system (see the
chapter "User settings", section "Making settings
in the "VARIOUS" menu", menu item "NORMSET").
Useful information
Warranty
We provide a manufacturer ' s warranty for prod-
ucts bought within the European Union. For de-
vices purchased outside the European Union, the
warranty terms issued by our respective responsi-
ble domestic agency are valid. The warranty terms
can be called up from www.blaupunkt.com.
Service
In some countries, Blaupunkt oers a repair and
pick-up service.
Information about the availability of this service in
your country can be found at www.blaupunkt.com.
If you want to take advantage of this service, you
may request a pick-up service for your car sound
system via the Internet.

20
Technical data
Voltage supply
Operating voltage: 10.5 – 14.4 V
Current consumption
In operation: 10 A
10 sec. after switch-o: < 3.5 mA
Amplier
Output power: 4 x 22 watts sine
at 14.4 V at 4 ohms.
4 x 50 watts max. power
Tuner
Wavebands in Europe/Asia/Thailand:
FM: 87.5 – 108 MHz
AM: 531 – 1,602 kHz
Wavebands in the US:
FM: 87.7 – 107.9 MHz
AM: 530 – 1,710 kHz
Wavebands in South America:
FM: 87.5 – 107.9 MHz
AM: 530 – 1,710 kHz
FM frequency response: 30 – 15,000 Hz
CD
Frequency range: 20 – 20,000 Hz
Pre-amp out
2 channels: 2 V
Input sensitivity
Front AUX-IN: 300 mV / 10 kΩ
Dimensions and weight
W x H x D: 178 x 52 x 170 mm
(incl. antenna connec-
tion adapter)
Weight: approx. 1.55 kg
Subject to changes
Technical data