Blaupunkt NEW YORK 800 User manual

Multimedia Navigation
New York 800
Operating instructions
www.blaupunkt.com

2
Controls – Device
1 button (Eject)
Eject a CD/DVD
2 MENU button
Call up main menu
In the main menu: Call up menu of active source
3 MAP button
Call up navigation
In navigation mode: Call up menu of active source
4 Microphone
5 Rotary/pushbutton
Short press: Switch on device
In operation: Mute audio source
Long press: Switch o device
Turn: Adjust volume
6 Infrared receiver for remote control
7 Reset button
Restoring the original factory settings of the device.
Caution! All personal settings will be lost!
8 Cover
9 SD card reader
Access only with open cover
: Front AV-IN socket (source AV-IN 1)
Access only with open cover
; Front USB socket (source USB 1)
Access only with open cover
< Touchscreen user interface
= MicroSD card reader for navigation data
Access only with open cover
> DVD/CD drive
2
3
5
8
6
4
7
1
13
12
14
9
10
11

3
Controls – Remote control
?
SRC button
Call up main menu
@ / EJECT button
Eject a CD/DVD
A AUDIO / MUSIC button
Select playback language (if available on DVD)
Call up folder overview of audio les
B DISP button
Show information on the display
C ZOOM button
Zoom in on image area
D BAND button
Select waveband/memory bank
E button
Answer a call
F GOTO button
Directly select title, chapter, movie or playtime
16
18
20
22
24
25
28
29
27
19
21
23
26
17
15
30
31
32
33
35
36
38
40
34
43
41
39
37
44
42
G RPT A-B button
Dene range for repeat function
H RPT button
Repeat function
I SETUP button
Call up settings menu
J button
Start and interrupt playback
Conrm settings
K / / / button
Navigate in menus and change settings
Tuning into stations manually ( / )
Starting station seek tuning ( / )
L button
Slow-motion playback
M Number buttons 0 - 9
N / MIX button
Random track play
O / SCN button
Scan function
P MUTE button
Mute audio source
Q button
Quit playback
R VOL + / – button
Adjusting the volume
S PIC button
Screen settings
T / button
Select title, chapter, movie
Fast searching
U button
Ending/rejecting a phone call
V CLEAR button
Delete last character of an entry
W TITLE button
Call up title and chapter list
X MENU button
Call up DVD menu
Y ANGLE / VIDEO button
Select camera viewing angle (if available on DVD)
Call up folder overview of movies
Z SUBTITLE / PHOTO button
Select subtitle language (if available on DVD)
Call up folder overview of images
[ button
Switching device on/o
\ EQ button
Call up equaliser menu

4
Contents
Safety notes ................................................................ 5
Symbols used ...........................................................................5
Road safety................................................................................5
General safety notes ..............................................................5
Declaration of conformity....................................................5
Cleaning notes............................................................ 5
Disposal notes............................................................. 5
Scope of delivery ........................................................ 6
Placing the device in operation................................. 6
Switching on/o......................................................................6
Volume........................................................................................6
Main menu ................................................................................6
Radio mode ................................................................. 6
Start radio mode .....................................................................6
Select memory bank..............................................................6
Tuning into a station..............................................................6
Storing stations manually....................................................7
Storing stations automatically (Travelstore) .................7
Switching RDS on/o ...........................................................7
Trac information ..................................................................7
Navigation................................................................... 8
Loading navigation data......................................................8
Download of map data.........................................................8
Starting the navigation.........................................................8
Initial startup ............................................................................8
Entering a destination...........................................................8
Address ......................................................................................8
Points of Interest ....................................................................9
Setting route options ......................................................... 10
Map Settings.......................................................................... 11
DVD/CD/USB/SDHC/iPod media playback ............. 12
Basic information ................................................................. 12
DVD/CD mode ...................................................................... 12
USB data carrier .................................................................... 12
SDHC cards............................................................................. 13
iPod/iPhone via USB ........................................................... 13
DVD movie playback .......................................................... 13
Audio playback of DVD/CD, USB, SDHC or
iPod/iPhone ........................................................................... 14
Video playback from DVD/CD, USB or SDHC ............. 14
Image playback from DVD/CD, USB or SDHC ............ 15
Bluetooth mode........................................................ 16
Starting Bluetooth mode .................................................. 16
Registering Bluetooth devices ........................................ 16
Telephone mode - Bluetooth........................................... 16
Bluetooth settings ............................................................... 17
Rear Seat Entertainment (RSE) ................................ 17
External audio/video sources.................................. 18
Sound settings.......................................................... 18
Volume distribution (fader/balance) ............................ 18
Equalizer.................................................................................. 18
Basic settings ............................................................ 19
Video......................................................................................... 19
General .................................................................................... 19
Time .......................................................................................... 19
Sound....................................................................................... 20
Language................................................................................ 20
Bluetooth ................................................................................ 20
DVD........................................................................................... 20
Volume..................................................................................... 21
Useful information ................................................... 21
Warranty.................................................................................. 21
Service...................................................................................... 21
Connection diagram ................................................ 22
Appendix................................................................... 23

5
Safety notes | Cleaning notes | Disposal notes
Safety notes
The car sound system was manufactured according to
the state of the art and established safety guidelines.
Even so, dangers may occur if you do not observe the
safety notes in these instructions.
These instructions are intended to familiarise you with
the most important functions. Detailed information can
be found on the Internet under www.blaupunkt.com.
• Read these instructions carefully and completely
before using the car sound system.
• Keep the instructions at a location so that they
are always accessible to all users.
• Always pass on the car sound system to third parties
together with these instructions.
In addition, observe the instructions of the devices used
in conjunction with this car sound system.
Symbols used
These instructions employ the following symbols:
DANGER!
Warns about injuries
CAUTION!
Warns about damages to the DVD/CD drive
DANGER!
Warns about high volume
The CE mark conrms the compliance with EU
directives.
쏅Identies a sequencing step
• Identies a listing
Road safety
Observe the following notes about road safety:
• Use your device in such a way that you can always
safely control your vehicle. In case of doubt, stop
at a suitable location and operate your device while
the vehicle is standing. As the driver, you may not use
the applications that will distract you from trac (de-
pending on the scope of functions of the device, e.g.
viewing videos, entering a destination).
• Follow the driving recommendations during the
route guidance only if you are not violating any
trac regulations! Trac signs and trac regula-
tions have always priority over driving recommenda-
tions.
• Always listen at a moderate volume to protect
your hearing and to be able to hear acoustic warn-
ing signals (e.g. police sirens). During mute phases
(e.g. when changing the audio source), changing the
volume is not audible. Do not increase the volume
during this mute phase.
General safety notes
Observe the following note to protect yourself against
injuries:
Do not modify or open the device. The device contains
a Class 1 laser that can cause injuries to your eyes.
Use as directed
This car sound system is intended for installation and
operation in a vehicle with 12 V vehicle system voltage
and must be installed in a DIN slot. Observe the output
limits of the device. Repairs and installation, if necessary,
should be performed by a specialist.
Installation instructions
You may only install the car sound system yourself if you
are experienced in installing car sound systems and are
very familiar with the electrical system of the vehicle. For
this purpose, observe the connection diagram at the end
of these instructions.
Declaration of conformity
We, Blaupunkt AudioVision GmbH & Co. KG, arm that
the device New York 800 fulls the fundamental require-
ments and other relevant regulations of the EU Directive
1999/5/EC.
The declaration of conformity can be found on the Inter-
net under www.blaupunkt.com.
Cleaning notes
Solvents, cleaning and scouring agents as well as dash-
board spray and plastics care product may contain in-
gredients that will damage the surface of the car sound
system.
Use only a dry or slightly moistened cloth for cleaning the
car sound system.
Disposal notes
Do not dispose of your old unit in the household
trash!
Use the return and collection systems available to
dispose of the old device, the remote control and
exhausted batteries.

6
Scope of delivery
The scope of delivery includes:
• New York 800
• Remote control (incl. battery)
• TMC Tuner (for 1 011 103 800/802/810/812 only)
• MicroSD card with navigation data in the MicroSD
card slot (only for devices with navigation)
• GPS antenna (for 1 011 103 800/802/810/812 only)
• External Bluetooth microphone
• Getting started
• Support frame
• Small parts set
• Installation material
• Connecting cable
Placing the device in operation
Caution!
Transport securing screws
Ensure that the transport securing screws are removed
before the startup of the device.
Switching on/o
Switching on/o with the rotary/pushbutton
쏅For switch-on, press the rotary/pushbutton
5 .
쏅For switch-o, hold the rotary/pushbutton
5
pressed for more than 2 seconds.
Switching on/o via vehicle ignition
If the car sound system is connected with the vehicle
ignition and it was switched o with the rotary/pushbut-
ton 5 , it is switched on or o with the ignition.
Volume
Adjusting the volume
You can adjust the volume in steps from 0 (o) to 50
(maximum).
쏅Turn the rotary/pushbutton
5 to change the vol-
ume.
Muting the car sound system (Mute)
쏅Briey press the rotary/pushbutton 5 to mute the
device or to reactivate the previous volume.
Main menu
In the main menu, you press the buttons on the touch-
screen to call up the dierent sources and operating
modes.
쏅Press the MENU button
2 .
The main menu is displayed.
As long as you do not select a new audio source, the
last active audio source is played back.
Note:
The gures used in these instructions are intended
to facilitate the explanations and details may deviate
from your device.
Radio mode
Start radio mode
쏅In the main menu, press the Radio button.
The radio menu is displayed.
Select memory bank
Dierent memory banks and wavebands are available.
Up to 6 stations can be stored in each memory bank.
쏅Press the button repeatedly until the desired
memory bank is displayed.
Tuning into a station
Tuning into stations manually
쏅Briey press the or button once or sev-
eral times to change the frequency in increments.
Scope of delivery | Startup | Radio mode

7
Enter broadcast frequency directly
If the frequency of the desired stations is known, it can
be entered directly via the touchscreen.
쏅In radio mode, press the button.
A numeric keypad is displayed for the frequency
input.
쏅Enter the frequency of the desired station with the
numeric keypad.
쏅Press the button.
The radio menu is displayed, the station of the
frequency entered is played back.
Starting station seek tuning
쏅Press the or button for approx. 2 seconds
to start station seek tuning.
The radio tunes into the next receivable station.
Note:
For the reception area Europe: In the FM waveband,
only trac information stations are tuned into if the
priority for trac information is switched on.
Storing stations manually
쏅Select the desired memory bank with the but-
ton.
쏅Set the desired station.
쏅Press the button.
The menu for storing stations is displayed. 6 memory
locations are available that are displayed as buttons.
쏅Press the button under which you want to store the
current station.
The station is stored, the radio menu is displayed
again.
Storing stations automatically
(Travelstore)
With Travelstore, you can automatically search for and
store the 6 FM stations oering the strongest reception
in the region in the memory bank FM1, FM2 or FM3.
쏅Select an FM memory bank.
쏅In the radio menu, press the button.
쏅In the options menu, press the Travelstore button.
The tuner starts the automatic station seek tuning.
After the storing is completed, the radio plays the
station at memory location 1 of the previously se-
lected memory bank.
Note:
With switched-on priority for trac information, only
trac information stations are stored.
Switching RDS on/o
Many FM stations broadcast an RDS (Radio Data System)
signal in addition to their programme in the reception
area Europe that allows additional functions, such as the
display of the station name.
쏅In the radio menu, press the button.
쏅The options menu is displayed, the current setting is
shown after RDS.
쏅In the options menu, press the RDS button to change
the setting.
쏅Press the button.
The radio menu is displayed again.
Trac information
In the reception region Europe, an FM station can iden-
tify trac announcements via an RDS signal. If priority for
trac reports is switched on, a trac report is automati-
cally switched through, even if the car sound system is
currently not in radio mode.
Note:
The volume is increased for the duration of the
switched-through trac announcement.You can ad-
just the minimum volume for trac announcements.
Switching priority for trac announcements on/o
쏅In the radio menu, press the TA button to switch the
priority for trac announcements on or o.
The TA button is lit if the priority for trac announce-
ments is switched on.
Setting the minimum volume for trac
announcements
쏅In the radio menu, press the button.
쏅In the options menu, press the TA VOL button.
쏅Adjust the desired volume with the  or but-
ton.
쏅Press the button.
The radio menu is displayed again, the set volume
is stored.
Radio mode

8
Navigation
Loading navigation data
The navigation software and map data are located on a
MicroSD card. For devices with navigation, the device is
delivered with the MicroSD card in the MicroSD card slot.
To be able to use the navigation, the MicroSD card must
be inserted in the card slot.
쏅Open the cover of the card slot
= next to the DVD/
CD tray.
쏅Insert the MicroSD card with the printed side up into
the slot until it engages.
쏅Close the cover of the slot.
Download of map data
To ensure that you have the latest version of the map
data when you purchase the New York 800, you have
30 days from the rst GPS positioning to download the
latest version of the map data once and free of charge
to the standard MicroSD card from the Internet at
www.naviextras.com.
You can always purchase map material from this site at
a later time.
Important note:
If the MicroSD card is lost or damaged, the naviga-
tion map license associated with the card will be lost.
In this case, the license must be purchased anew with
a new MicroSD card.
Starting the navigation
쏅In the main menu, press Navigation to start the navi-
gation mode.
The navigation menu is displayed. If you start the
navigation for the rst time, the setup wizard is dis-
played.
Initial startup
If you start the navigation for the rst time, a setup wizard
appears which performs the basic settings for the naviga-
tion.
쏅Adjust the language for the navigation. This can be
a dierent language from the other functions of the
NewYork800.
쏅Conrm the selection with .
The end-user license agreement is displayed.
쏅Read the end-user license agreement. If you agree
with the terms and conditions, press .
The conguration wizard starts.
쏅Press to continue.
쏅Select a voice for the voice output of the navigation.
Various voices are available for the languages.
쏅Conrm the selection with .
쏅Specify the time format and the units for the naviga-
tion. Next, press .
On the next screen, you can perform your preferred
route settings.
쏅If necessary, change the entries by pressing the dis-
played menu entries.
쏅Press ,after you adjusted the settings.
쏅Touch , to nish the conguration.
The navigation menu is displayed.
Entering a destination
Destinations can be entered in dierent ways: Via the ad-
dress or as point of interest from the database of points
of interest. Points of interest can be sights, museums, sta-
diums, petrol stations.
Address
쏅Open the navigation menu.
쏅Press on Find.
The menu for the destination entry is displayed.
쏅Press Find Address.
Navigation

9
The menu for the address entry is displayed.
쏅Enter the country, city and street in succession as
well as the intersection or house number. To do so,
press the corresponding entry in the address entry
menu.
A menu for text entry is displayed.
쏅Enter the desired destination via the keyboard.
With every character entered, the entry in the input
line is automatically completed.
쏅If the name of the desired destination is displayed in
the address line, press the button.
The selected destination is displayed on the map.
쏅Press Next to start the route guidance.
The calculation of the route starts. Depending on the
distance between start and destination, the route
calculation may take some time.
After the route calculation is complete, the param-
eters of the route, such as distance and time, are
displayed. In addition, the entire route is displayed
on the map.
쏅Press Go! to start the route guidance.
Points of Interest
쏅Open the navigation menu.
쏅Press on Find.
The menu for the destination entry is displayed.
쏅Press Find Places.
The point of interest menu is displayed.
쏅You can select a point of interest from one of the
four predened categories Petrol Station, Parking,
Restaurant and Accommodation or start a separate
search.
쏅For example, press on Petrol Station to quickly nd
a petrol stations.
Navigation

10
A list of petrol stations in the vicinity of the vehicle is
displayed. The petrol stations are sorted by distance
to vehicle.
쏅Select a petrol station from the list by pressing on the
list entry.
The petrol stations is displayed on the map.
쏅Press Next.
The route course and the route data are displayed.
쏅Press Go! to start the route guidance.
Setting route options
In the route options, the vehicle type, type of route
(quick, short, dynamic) and additional parameters are
dened which are required by the device to calculate the
route according to your requirements.
You dene the route options during the initial congura-
tion of the navigation, but you can change them for any
route guidance.
Adjusting route options before the route guidance
쏅Call up the navigation menu.
쏅Press More….
쏅Press Settings.
The settings menu for the navigation is displayed.
쏅Press on the button to display the second page.
쏅Press Route Settings.
The route settings are displayed.
쏅Change the settings, if necessary.
쏅Press Back repeatedly until the navigation menu is
displayed again.
Navigation

11
Changing route options during route guidance
쏅During a route guidance, press the More button.
쏅Press Route Settings.
The route settings are displayed.
쏅Change the settings, if necessary.
쏅Press Back.
The route guidance is displayed again.
Map Settings
With the map settings, you can adjust the view mode
(2D or 3D), the viewing angle of the map, the colours and
the display of buildings and points of orientation on the
map. In addition, you can specify for categories of points
of interest whether they should be displayed on the map,
e.g. car dealerships, cafés, restaurants.
쏅Call up the navigation menu.
쏅Press More….
쏅Press Settings.
The settings menu for the navigation is displayed.
쏅Press on the button to display the second page.
쏅Press Map Settings.
The map settings are displayed.
쏅Change the settings, if necessary.
쏅Press Back repeatedly until the navigation menu is
displayed again.
Note:
You can also change the map settings during the
route guidance:
쏅During a route guidance, press the More button.
쏅Press Map Settings.
The map settings are displayed.
쏅Change the settings, if necessary.
쏅Press Back.
The route guidance is displayed again.
Navigation

12
DVD/CD/USB/SDHC/iPod media
playback
Basic information
The New York 800 can be used to play audio DVDs/CDs
(CDDA) and DVD/CD-R/RWs with audio, MP3 or WMA
les as well as MP3 or WMA les on USB data carriers and
SDHC cards.
In addition, you can view movies and images from DVDs/
VCDs/CDs, USB data carriers and SDHC cards on the dis-
play or a connected monitor (Rear Seat Entertainment
- RSE).
For safety reasons, the playback of movies and images on
the integrated monitor is allowed only while the vehicle
is standing and the hand brake is applied. The "BRAKE"
cable must be connected with the hand brake connec-
tion of the vehicle (see Connection diagram at the end
of these instructions). The movie playback on an external
monitor is also possible while driving.
Notes:
• To ensure proper functioning, use only CDs with
the Compact-Disc logo and DVDs with the DVD
logo.
• Blaupunkt cannot guarantee the awless func-
tion of copy-protected DVDs/CDs and all DVD/CD
blanks, USB data carriers and SD cards available on
the market.
Note the following information when preparing an MP3/
WMA data carrier:
• Naming of tracks and directories:
– Max. 32 characters without the le extension
".mp3" or ".wma" (the use of more characters re-
duces the number of tracks and folders that the
car sound system can recognise)
• DVD/CD formats: audio CD (CDDA), CD-R/RW,
Ø: 12 cm
• DVD/CD data formats: ISO 9669 Level 1 and 2, Joliet
• CD burn speed: Max. 16x (recommended)
• USB format/le system: mass storage device/FAT32
• SD card le system: FAT32
• File extension of audio les:
– .MP3 for MP3 les
– .WMA for WMA les
•WMAles only without Digital Rights Management
(DRM) and created with Windows Media® Player ver-
sion 8 or later
• MP3 ID3 tags: Version 1 and 2
• Bit rate for creating audio les:
– MP3: 32 to 320 kbps
– WMA: 32 to 192 kbps
• Maximum number of les and directories:
– USB medium: Up to 1500 entries per directory
– SD cards: Up to 1500 les per directory.
DVD/CD mode
Inserting a DVD/CD
Risk of severe damage to the DVD/CD drive!
Noncircular contoured DVDs/CDs and DVDs/
CDs with a diameter of 8 cm (mini DVDs/CDs)
must not be used.
We accept no responsibility for any damage to the
drive that may occur as a result of the use of unsuitable
DVDs/CDs.
쏅Insert the DVD/CD with its printed side up into the
DVD/CD tray
> until you feel a slight resistance.
The drive automatically draws in the DVD/CD and
checks its data. Afterwards, the playback starts in
DVD/CD or MP3 mode.
Note:
You must not hinder or assist the drive as it automati-
cally draws in the DVD/CD.
Ejecting a DVD/CD
쏅Press the button 1 to eject an inserted DVD/CD.
Note:
You must not hinder or assist the drive as it ejects the
DVD/CD.
USB data carrier
This device features two USB ports:
• USB1 is located under the cover at the front of the
device.
• USB2 is implemented as a USB socket on a cable at
the rear of the device. You can specify the installa-
tion location of the port during the installation of the
device.
Connecting USB1
쏅Open the cover
8 underneath the rotary/pushbut-
ton.
쏅Insert the USB data carrier in the USB socket
; .
The device automatically switches to USB1 mode.
The data are read, the playback starts with the rst
media le recognized by the device.
Removing the USB1 data carrier
쏅Turn o the car sound system.
쏅Disconnect the USB data carrier.
DVD/CD/USB/SDHC/iPod media playback

13
SDHC cards
This device features an SDHC card slot under the cover at
the front of the device.
Inserting the SDHC card
쏅Open the cover
8 underneath the rotary/pushbut-
ton.
쏅Insert the SDHC card with its labelled side to the left
(attened corner to the top) and its contacts rst into
the card slot
9 until it clicks into place.
The device automatically switches to SDHC mode.
The data are read, the playback starts with the rst
media le recognized by the device.
Removing the SDHC card
쏅If necessary, open the cover
8 .
쏅Push on the SDHC card until it disengages.
쏅Pull the SDHC card out of the card slot
9 .
iPod/iPhone via USB
You can connect numerous iPod® and iPhone® models to
the car sound system via the USB ports and control the
audio playback from the car sound system.
Note:
A list of compatible iPod® and iPhone® models is lo-
cated at the end of these instructions. Blaupunkt can-
not guarantee the awless function of other iPod®
and iPhone® models.
Use a suitable adapter cable to connect your iPod® or
iPhone® with the USB port of the car sound system.
쏅Insert the USB plug of the adapter cable into one of
the USB sockets (USB1 or USB2) of the device.
The device automatically switches to USB mode. The
data are read, the playback starts with the rst media
le on the iPod®/iPhone® recognized by the device.
DVD movie playback
The New York 800 can play video DVDs and VCDs. After
inserting the DVD, the playback starts automatically. The
DVD menu is displayed.
You can navigate in the DVD menu by touching the corre-
sponding buttons in the DVD menu on the touchscreen.
After starting the movie via the menu of the DVD, the
movie is displayed. The playback menu for DVDs is hid-
den.
쏅Briey touch the touchscreen once to display the
playback menu again.
The playback menu is shown.
[] Display the second page of the menu.
[]End playback, call up DVD menu.
[] Select previous chapter.
[] Interrupt playback and continue playback.
[] Select next chapter.
[] Fast searching reverse.
[]Fast searching forward.
쏅Touch to display the second page of the play-
back menu.
The second page of the playback menu is displayed.
[] Display rst page.
[] Select playback language (only if supported
by the DVD).
[] Show subtitles (only if supported by the
DVD).
[] Switch repeat function for chapter or area
A-B on/o.
[] Dene range for repeat function.
[] Switch camera viewing angle (Angle) (only
if supported by the DVD).
[] Call up keypad for direct selection of titles,
chapters or playing time.
DVD/CD/USB/SDHC/iPod media playback

14
Audio playback of DVD/CD, USB, SDHC or
iPod/iPhone
The principles of the audio playback (MP3/WMA) from
data carriers or iPod®/iPhone® are identical for all sources.
쏅Select the desired source via the main menu.
If the playback starts with image or video les,
쏅press the button to change to the audio play-
back.
The folders of the data carrier containing audio les
are displayed.
[] Change to next higher folder level.
[] Move selection mark.
[] Move selection mark.
[] Open selected folder or start titles.
- Or -
Double-click on the name of the folder/title.
The folder is opened/the title is started.
[] Display keypad to directly enter the number
of the desired title.
[] Display equalizer.
After starting a title, the playback menu is displayed.
[] Short press: Title selection.
Long press: Fast searching.
[] Interrupt playback (pause).
[] Short press: Title selection.
Long press: Fast searching.
[] Start REPEAT function:
After a single press, the repeat function for
the current title is active.The button is high-
lighted and a 1 is shown on the button.
After a double press, the repeat function
for the current folder is set. The button is
highlighted and a folder icon is shown on
the button.
After a triple press, the repeat function of
all titles of the data carrier is set. The but-
ton is highlighted and an A is shown on the
button.
[] Start MIX random track play and end it
again.
If the MIX function is activated, the button is
displayed as highlighted.
Video playback from DVD/CD, USB or
SDHC
쏅Select the desired source via the main menu.
If the playback starts with audio or image les,
쏅press the button to change to the video play-
back.
The folders of the data carrier containing movie les
are displayed.
Note:
Folders and titles are selected and started as de-
scribed under audio playback.
If you selected a movie, the playback is started. During
the movie playback, the playback menu is hidden.
쏅Briey touch the touchscreen once to display the
playback menu again.
DVD/CD/USB/SDHC/iPod media playback

15
The playback menu is shown.
[] Display the second page of the menu.
[]End playback, change to folder view.
[] Select previous movie.
[] Interrupt playback and continue playback.
[] Select next movie.
[] Fast searching reverse.
[]Fast searching forward.
Second page of playback menu.
[] Display rst page.
[] Select playback language (only if supported
by the movie).
[] Show subtitles (only if supported by the
movie).
[] Switch repeat function for movie or folder
on/o.
[] Switch random playback on/o.
[] Interrupt playback, display of folder view.
[] Call up keypad for direct selection of movie
or playing time.
Note:
You can play back video les stored on an iPod®/
iPhone® with this device. For this purpose, the iPod®/
iPhone® must be connected with the device using a
special cable (USB - AV) that is commercially avail-
able.
Image playback from DVD/CD, USB or
SDHC
쏅Select the desired source via the main menu.
If the playback starts with audio or movie les,
쏅press the button to change to the image play-
back.
The folders of the data carrier containing images are
displayed.
Note:
Folders and images are selected and started as de-
scribed under audio playback.
DVD/CD/USB/SDHC/iPod media playback

16
Bluetooth mode
The Bluetooth® function allows registering cell phones
and media playback devices with the NewYork800.
When you register a cell phone with the NewYork800,
you can make phone calls with the built-in hands-free
function. You can access the lists of dialled numbers and
the phone book of the registered cell phone.
If a cell phone is registered via Bluetooth® and a call is re-
ceived during the playback of another source, the source
playback is interrupted and the call menu is displayed.
Starting Bluetooth mode
쏅In the main menu, press on Bluetooth.
The Bluetooth® menu is displayed. It contains the list
of known Bluetooth® devices. Other audio sources
are switched o.
[] Change to next higher level.
[] Move selection mark.
[] Move selection mark.
[] Disconnect connection to marked device.
[] Delete marked device from the list.
[] Display options menu.
쏅Double-click on the name of the Bluetooth® device
with which you want to establish a connection.
When the device is in range, the connection is estab-
lished and the menu for the device is displayed.
Registering Bluetooth devices
If you want to register a device with the New York 800 for
the rst time, proceed as follows:
쏅Ensure that Bluetooth® is activated at the New York
800 and at your Bluetooth® device.
쏅In the options menu of the Bluetooth® mode, enter a
pairing code (see Bluetooth® settings).
쏅Search for new devices/connections on your Blue-
tooth® device.
쏅The New York 800 appears as NY800 in the list of
Bluetooth® devices.
쏅Establish the connection; you may have to enter the
pairing code that was previously dened on the New
York 800.
The connection is being established and the menu
for the registered device is displayed.
Telephone mode - Bluetooth
If you registered a phone with the New York 800 via Blue-
tooth®, the following menu appears.
[] Change to next higher level.
[] Move selection mark.
[] Move selection mark.
[] Disconnect connection with current device.
[] Display keypad to directly enter a phone
number
[] Display options menu.
쏅Select a contact/number via the call lists or the phone
book and double the entry twice (double-click).
The connection is being established.
Bluetooth mode

17
If a call is coming in, the call menu is displayed.
[] Answer a call.
[] Reject a call.
Bluetooth settings
In the options menu for Bluetooth®, you can make the
basic settings for the Bluetooth® mode.
쏅In the Bluetooth® menu, press the button.
The options menu is displayed.
Bluetooth – Bluetooth® can be switched on or o.
Auto connect – If "Auto Connect" is activated, the
device automatically connects with known Blue-
tooth® devices as soon as they are in range.
Auto answer – If "Auto Answer" is activated, incom-
ing phone calls are automatically answered.
Pairing code – Many Bluetooth® devices request the
pairing code before establishing the connection. You
can dene it here.
Phone book sync – To be able to access the phone
book of a connected telephone, you must rst syn-
chronise it via this menu entry.
Bluetooth mode | Rear Seat Entertainment
Rear Seat Entertainment (RSE)
The New York 800 features outputs to connect two exter-
nal monitors and audio outputs for the rear area of the
vehicle.
Since a dierent programme can be displayed on the ex-
ternal monitors than on the device, it is possible to view
images and movies on an external monitor while driving.
The audio playback for the RSE is established via the
sockets Rear Out R and Rear Out L. These sockets should
be connected with suitable jack sockets so that the pas-
sengers in the front can listen to their audio programme
via headphones.
The source selection for the RSE takes place in the RSE
menu of the device.
쏅Call up the main menu.
쏅Press the button.
The RSE menu is displayed.
쏅Select a source via the corresponding button or de-
activate the RSE with the Rear o button.

18
External audio/video sources
This device features two external AV inputs for audio and
video playback:
• AV-IN 1 is located under the cover at the front of the
device.
• AV-IN 2 is implemented as a cinch socket on a cable
at the rear of the device. You can specify the instal-
lation location of the port during the installation of
the device.
Danger!
Increased risk of injury from connector.
In case of an accident, the protruding connec-
tor in the front AV-IN socket may cause injuries. The use
of straight plugs or adapters leads to an increased risk
of injury.
쏅Start the AV-IN mode with the button AV-IN 1 or AV-
IN 2.
The display shows the audio or video playback of the
selected AV source.
External audio/video sources | Sound settings
Sound settings
Volume distribution (fader/balance)
You can adjust the volume distribution in the vehicle
for all sources.
쏅In the main menu, press the button.
The equalizer menu is displayed.
쏅Press the button.
The menu for fader and balance is displayed.
쏅Adjust fader and balance with  / or
 / .
쏅Next press on Equalizer.
The setting is stored, the main menu is displayed
again.
Equalizer
You can adjust the equalizer for all sources.
쏅In the main menu, press the button.
The equalizer menu is displayed.
쏅Select a preset equalizer with  or .
- Or -
쏅Use  or to adjust the level for Bass, Mid and
Treble as well as the frequency of the LPF, MPF and
HPF lters according to your needs.
쏅Next press on Equalizer.
The setting is stored, the main menu is displayed
again.

19
Basic settings
Basic settings
In the settings menu of the device, you can adjust
the basic settings for the dierent functions of the
NewYork800 to your requirements.
쏅In the main menu, press the Settings button.
The settings menu is displayed, the General sub-
menu is activated.
쏅Call up the submenus with the buttons in the lower
area of the settings menu.
Video
The following settings are possible:
Aspect ratio – Adjust image format
Rear view camera – Adjust back-up camera (if a back-up
camera is connected)
DivX registration code – Display of the DivX® registra-
tion code
General
The following settings are possible:
Radio region – Select the reception region for the radio
reception.
Background light o – If this value is set, the display of
the radio is completely switched o after 10 or 20 sec.
without use.
Dimmer mode – Adjust the display brightness
Beep – Switch conrmation beep on/o
Wallpaper – Select the wallpaper for menus. Various mo-
tifs can be selected in the device. You can also select your
own images which you previously stored on the MicroSD
card.
Calibration – The touchscreen can be calibrated here.
SWC – The buttons of a connected steering wheel con-
trol can be congured here.
Load factory – Resets all personalised settings.
Time
The following settings are possible:
Date – Set the date
Clock mode – Selection between 12 and 24-h mode
Time – Set the time

20
Sound
The following settings are possible:
Subwoofer – Switch subwoofer on/o
Subwoofer lter – Make the setting according to the
subwoofer used (settings: 80/120/160 Hz).
Dynamic bass boost – Switch dynamic bass on/o
Language
The following settings are possible:
On screen display – Language for the user interface of
the NewYork800.
DVD audio – The audio playback of DVDs is started in the
language dened here.
DVD subtitle – The subtitles of DVDs are shown in the
language dened here.
Disc menu – The DVD menu is displayed in the language
dened here.
Bluetooth
The following settings are possible:
Bluetooth – Bluetooth® can be switched on or o.
Auto connect – If "Auto Connect" is activated, the device
automatically connects with known Bluetooth® devices
as soon as they are in range.
Auto answer – Phone calls from connected telephones
are automatically answered if this option is enabled.
Microphone – Select the microphone to be used for the
hands-free system via Bluetooth®.
Pairing code – Many Bluetooth® devices request the
pairing code before establishing the connection. You can
dene it here.
DVD
The following settings are possible:
Set password – Dene a password if you want to use the
parental controls.
Rating level – The rating of DVDs can be dened here.
If set to "Adult", all movies can be played back. If a pass-
word was congured, the rating level can be changed
only with the password
Basic settings