Blaupunkt XPOWER+ User manual

APP INSTRUCTION XPOWER+

PREPARING THE ROBOT
APP : ADDING THE ROBOT
APP : INSTALLATION
WIFI SETTINGS
APP : REGISTRATION
ACTIVATE THE ROBOT
1
4
2
5
3
6
INDEX
bluebotxpower.com 00800 357 00 753 [e-mail]
Need help?

Make sure the robot is fully charged,
before using it for the rst time.
Usually around 8 to 10 hours of charging
would be enough. The robot only charges
when the robot is turned on as shown in
step 1
3
PREPARING THE ROBOT
bluebotxpower.com 00800 357 00 753 [e-mail]
Need help?
Make sure the on/o switch is set to
‘on’. This is the switch on the side of
the robot. Wait until the robot has
started fully.
1Place the robot in the docking station
(charger) to charge.
2

Place the robot close to your router.
PREPARING THE ROBOT
5
bluebotxpower.com 00800 357 00 753 [e-mail]
Need help?
Remove the robot from the docking station (charger).
4
It is not possible to register the robot in the
app while it is physically in the docking
station

Download the app for your specic robot.
(Bluebot Robotics app)
Click on the icons below to directly install the App.
Make sure your phone is connected to the Wi-Fi network.
6
APP : INSTALLATION
7
Please note that the XPOWER+ robot works
on a frequency of both 2.4 & 5.0 GHz.
bluebotxpower.com 00800 357 00 753 [e-mail]
Need help?

Open the app and register yourself; select‘Europe’ as
your area and tap‘Go to App’
8
APP : REGISTRATION
Fill in an email address and password of choice and
tap‘Register’
9
Zone
Europe
Go to App
Register
E-mail
Password
Conrm password
Welcome
bluebotxpower.com 00800 357 00 753 [e-mail]
Need help?

Click the‘+’to add the robot.
APP : ADDING THE ROBOT
10 Select the robot model you have (bluebotXP+) 11
BluebotXP+ BluebotXE
Select Model
bluebotxpower.com 00800 357 00 753 [e-mail]
Need help?

Press and hold the button on the top of your XPOWER+
device until it begins to blink.
On the App conrm that the reset was successful.
12
APP : ADDING THE ROBOT
13
Reset successful
Reset robot (BluebotXP+)
bluebotxpower.com 00800 357 00 753 [e-mail]
Need help?

Select your Wi-Fi signal. Enter your password for Wi-Fi
connection and tap next.
Press the‘home’button on your phone and go to the
Wi-Fi settings.
Select the network that
begins with blaupunkt_ ;
and return to the app.
14
APP : WIFI SETTINGS
15
Network conguration
For Android phones:
Do NOT use the “Back” button, use the
“Home” button instead.
Next
bluebotxpower.com 00800 357 00 753 [e-mail]
Need help?

The App will now connect to the robot. If you have been successful,
your robot will now be displayed in the app.
Tap on the robot in your app and you will be able to start
vacuum cleaning.
16
APP : ACTIVATE THE ROBOT
17
Hold the telephone in close proximity to the
robot.
BluebotXP+
BluebotXP+
100%
bluebotxpower.com 00800 357 00 753 [e-mail]
Need help?