Blaupunkt XSMART User manual

APP INSTRUCTION XSMART

PREPARING THE ROBOT
APP : ADDING THE ROBOT
APP : INSTALLATION
WIFI SETTINGS
APP : REGISTRATION
ACTIVATE THE ROBOT
1
4
2
5
3
6
INDEX
Need help?

Make sure the robot is fully charged, before using it for
the rst time.
Remove the robot from the docking station (charger).
Usually around 8 to 10 hours of charging
would be enough.
1
PREPARING THE ROBOT
2
Need help?

Place the robot close to your router.
PREPARING THE ROBOT
3
Need help?
Make sure the on/o switch is set to‘on’. This is the switch
on the side of the robot.Wait until the robot has started
fully.
4
It is not possible to register the robot in the
app while it is physically in the docking
station

Make sure your phone is connected to the Wi-Fi network.
5
APP : INSTALLATION
6
Need help?
Please note that the XEasy robot
only works on afrequency of 2.4
GHz.
Download the app for your specicrobot.
(BluebotXS PLUS app)

Open the app and register yourself; select‘Europe’ as
your area and tap‘Go to App’
7
APP : REGISTRATION
Fill in an email address and password of choice and
tap‘Register’
8
Zone
Europe
Go to App
Register
E-mail
Password
Conrm password
Welcome
Need help?

Click the‘+’to add the robot.
APP : ADDING THE ROBOT
9 10
BluebotXP+ BluebotXE
Select Model
Need help?
IF ASKED: Select the robot model you have (bluebotXS)

On the App conrm that the reset was successful.
11
APP : ADDING THE ROBOT
12
Reset successful
Need help?
Press and hold the EDGE CLEAN button on the top
of your device until the display shows: CONN

Select your Wi-Fi signal. Enter your password for Wi-Fi
connection and tap next.
Press the‘home’button on your phone and go to the
Wi-Fi settings.
Select the network that
begins with blaupunkt_ ;
and return to the app.
13
APP : WIFI SETTINGS
14
Network conguration
For Android phones:
Next
Need help?
Do NOT use the “Back” button, use
the “Home” button instead.

The App will now connect to the robot. If you have been successful,
your robot will now be displayed in the app.
Tap on the robot in your app and you will be able to start
vacuum cleaning.
15
APP : ACTIVATE THE ROBOT
16
Hold the telephone in close proximity to the
robot.
100%
Need help?